Showing all 22 results

• 

  1K/TURBO- Race Style Winch Bumper (2019-2023)

  $300.00 – $350.00

  This listing is for 1K/TURBO models only.

  (2019-2023)

  This bumper comes with all mounting winch plates and hardware needed to install.

  (DOES NOT INCLUDE FAIRLEAD)

  Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)

  Wide Spool Winches DO Fit In This Bumper

  These bumpers use a 6 inch fairlead.

   

  Select options
• 

  1K/Turbo Rear Bumper (2019-2023)

  $400.00 – $445.00

  This listing is for 1K/TURBO models only.

  This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. 

  Made from 1.75 x .120 Wall Steel

  CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

  Select options
• 

  Front Winch Bumper-1K/TURBO- (2019 to 2023)

  $450.00 – $500.00

  This listing is for 2019-2023 1K/TURBO MODELS ONLY.

  This bumper comes with all mounting winch plates and hardware needed to install.

  (DOES NOT INCLUDE FAIRLEAD)

  Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)

  Wide Spool Winches DO Fit In This Bumper

  These bumpers use a 6 inch fairlead. 

   

  WITH BROW: LOOPS AROUND HEADLIGHTS

  NO BROW: UNDER HEADLIGHTS

   

  Select options
• 

  TURBO S- Front Winch Bumper

  $470.00 – $535.00

  This listing is for Turbo S models only.

   

  This bumper comes with all mounting winch plates and hardware needed to install.

  (DOES NOT INCLUDE FAIRLEAD)

  Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)

  Wide Spool Winches DO Fit In This Bumper

  These bumpers use a 6 inch fairlead. 

   

  WITH BROW: LOOPS AROUND HEADLIGHTS

  NO BROW: UNDER HEADLIGHTS

  Select options
• 

  TURBO S- Race Style Winch Bumper

  $300.00 – $350.00

  This listing is for Turbo S models only.

  This bumper comes with all mounting winch plates and hardware needed to install.

  (DOES NOT INCLUDE FAIRLEAD)

  Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)

  Wide Spool Winches DO Fit In This Bumper

  These bumpers use a 6 inch fairlead.

  Select options
• 

  1K/Turbo Front Bumper (2019-2023)

  $430.00

  1K/Turbo Front Bumper (2019-2023)

  This Bumper is a non-winch bumper that is designed to fit a 1K or Turbo Polaris RZR.
  It is specific to 2019-2023.

  It comes with all hardware needed.

  Select options
• 

  Aluminum End Caps for Bumpers and Tree Kickers

  $10.00 – $60.00

  These are aluminum replacement end caps for L&W bumpers and tree kickers. 

  These are aluminum replacement end caps for L&W bumpers and tree kickers. 

  **The spiked end caps may interfere with larger tires if installing with tree kickers.**

   

  • MADE IN USA
  • Perfect for Tubing ends
  • Machined from 6061-T6 aluminum

  FITMENT:

  1.75 tubing diameter

  .120 wall thickness

  Select options
• 

  PRO XP- Sport Bumper

  $300.00 – $350.00

  This listing is for PRO XP models only.

  (NON R MODEL)

  FITMENT: 19-Current PRO XP

  This front bumper comes with all hardware needed to install.

  Made of 1.75” x .120” DOM , 11GA and 3/16” plate
  Bumper works in CONJUNTION with aftermarket winch mounts.

  This bumper is not a winch mount- Only a Fairlead mount
  Works with most popular aftermarket winch mounts including KFI, SUPERATV, and L&W.
  Integrated holes in corners for 3⁄4” blinkers

  These bumpers use a 6 inch fairlead. 

  (fairlead is not included UNLESS purchased as an add on below)

  we do not offer custom colors. 

  Select options
• 

  Turbo S- Rear Bumper (18-Current)

  $400.00 – $445.00

  This listing is for Turbo S models only.

  This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. 

  Made from 1.75 x .120 Wall Steel

  CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

  Select options
• 

  PRO XP / TURBO R Rear Bumper

  $400.00 – $455.00

  Pro Xp/ Pro R Rear Bumper

  Fits 2020-current Polaris PRO XP and TURBO R
  Easy bolt on installation. No drilling required
  Made from 1.75” x .120 DOM

  Select options
• 

  End Caps for Bumpers/Tree Kickers

  $12.00 – $20.00

  These are plastic replacement end caps for L&W bumpers and tree kickers. 

  Select options
• 

  6” Aluminum Fairlead

  $50.00

  6 inch fairlead.

  Comes with the hardware pictured.

  Compatible with L&W bumpers.

  Also compatible with all bumpers with 6″ mounting holes or any winch mount requiring a 6″ mount fairlead. 

  Made out of 6061 aluminum

  1 inch thick. 

  Add to cart
• 

  Receiver Hitch Plate for Factory Replacement

  $145.00

  This receiver hitch plate is for anyone that isn’t planning on running a bumper, or is running bumper that requires the use of a factory shaped radius rod plate. 

  It is just a direct replacement of the factory radius rod plate with an added receiver hitch.

  This only comes in black.

  Material Specs:

  1/4″ thick HRPO steel. 

  Receiver protrusion for all variations is 5-15/16″

  All variations accepts standard 2″ receiver with 5/8″ pin

  Select options
• 

  1K/Turbo-Rear Bumper (14-18 Model)

  $350.00 – $400.00

  This Listing is for 1k/turbo 14-18 Model only!
  It WILL NOT fit a 2019-up model rzr. 

  This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. Made from 1.75 x .120 Wall Steel

   CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

  Select options
• 

  1K/TURBO- Receiver Hitch Plate for L&W Bumper

  $145.00

  This is a replacement for the steel or billet radius plates that are used in correspondence with an L&W Bumper.

  They come in black only.

  Material Specs:

  1/4″ thick HRPO steel. 

  Receiver protrusion for all variations is 5-15/16″

  All variations accepts standard 2″ receiver with 5/8″ pin

  Select options
• 

  Race Style REAR Bumper (2019-2023)

  $325.00 – $375.00

  This listing is for 1K/TURBO models only.

  This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. 

  Made from 1.75 x .120 Wall Steel

  CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

   

   

   

  Select options
• 

  Winch Plate replacement kit for L&W Winch Bumper

  $50.00

  This is the replacement plates and hardware for a L&W Winch Bumper

   

  This will not work with non- L&W Bumpers

  Select options
• 

  Pro R/ Turbo R- Front Bumper

  $325.00 – $375.00

  FITMENT: 2022-CURRENT Pro R/Turbo R
  Made from 11ga HRPO
  Fits most winches up to 6k pounds
  Factory bull bar and lower valance plastics are not used
  Color options for bumper and overlays separate (mesh will always be black)
  **must be used with L&W winch mount**

  Select options
• 

  2014-2018 Front Winch Bumper 1K/TURBO

  $450.00 – $500.00

  2014-2018 Front Winch Bumper 1K/TURBO

  This bumper comes with all mounting winch plates and hardware needed to install.

  (DOES NOT INCLUDE FAIRLEAD)

  This bumper comes (WITH BROWS) AS PICTURED ABOVE ONLY. MEANING IT LOOPS AROUND THE HEADLIGHTS.

  Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)

  Wide Spool Winches DO Fit In This Bumper

  These bumpers use a 6 inch fairlead. 

  Select options
• 

  Receiver Hitch Add On Plate

  $145.00

  This is the receiver hitch for anyone that currently has an L and W radius rod plate steel/billet that wants to add a receiver hitch. 

  It can be used with our bumpers as well.  

  Only comes in black.

  Material Specs:

  1/4″ thick HRPO steel. 

  Receiver protrution for all variations is 5-15/16″

  All variations accepts standard 2″ receiver with 5/8″ pin

  Add to cart
• 

  TURBO S- Receiver Hitch Plate for L&W Bumper

  $145.00

  This is a replacement for the steel or billet radius plates that are used in correspondence with a Turbo S L&W Bumper.

  They come in black only.

  PLEASE NOTE WITH USING THIS PLATE YOU MAY HAVE TO REMOVE AND OR MOTIFY THE PLACEMENT OF THE D HOOK ON THE BOTTOM ON YOUR MACHINE FOR THE PLATE TO SIT FLUSH WITH THE MOUNTING POINTS TO BOLT UP PROPERLY. 

  Material Specs:

  1/4″ thick HRPO steel. 

  Receiver protrusion for all variations is 5-15/16″

  All variations accepts standard 2″ receiver with 5/8″ pin

  Add to cart
• 

  TURBO S- Race Style Rear Bumper

  $325.00 – $375.00

  This listing is for Turbo S models only.

  This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. 

  Made from 1.75 x .120 Wall Steel

   CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

   

   

  Select options