Category: Pro R

Pro R

Showing all 14 results

  • PRO R/TURBO R- RADIUS ROD PLATE

    $160.00$180.00

    PRO R/TURBO R RADIUS ROD PLATE

    Fitment: 2022current Polaris Pro R and 2022current Polaris Turbo R


    Made from 6061T6 Billet aluminum


    Adds strength as well as looks


    Comes with pull point

    This listing is for the radius plate only. 

    PLEASE NOTE: If powder coat option is chosen only the plate itself will be powdered, the pull point will always be billet aluminum

    Select options
  • PRO Grill WITH Lightbar

    $185.00

    PRO XP/R GRILL

    FITMENT: All Pro XP models and Pro R/ Turbo R models

    If you choose to get the Grill it does Come with the Light Bar (does not include wiring harness)

    Easily snaps in and out.

    Not screwed to the machine.

    Must drill 4 holes to install snap tab for main grill.

    Side Vent color will be the same color you choose for the grill overlay color.

    Select options
  • PRO R 2 Heim Radius Rods

    $375.00$790.00

    Fitment:  2022 PRO R

    Massive 2” direct bolt lowers, utilizing ¾” uniballs.

    1.5” thick adjustable uppers with ¾” heims on both ends.

    Made of 6061 T6 Billet Aluminum

    Select options
  • PRO XP /PRO R/ TURBO R- Packout Mount

    $145.00

    -Made from 10GA Steel
    -Comes powder coated black
    -(2) holes must be drilled to install
    -An angled design allows more room for cooler
    -When used in the PRO R models, many popular coolers will fit and still open. (Ozark Trail 26qt
    works best

     

    Add to cart
  • PRO R -2 SEAT TREE KICKERS

    $670.00$735.00

    2022CURRENT POLARIS RZR PRO R 2 SEAT (ALL MODELS) TREE KICKERS

    FITMENT:


    Fits All trims of The RZR PRO R.


    MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)


    PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME


    COMES RAW OR ANY POLARIS OEM COLOR


    HEAVY DUTY THROUGHFRAME HARDWARE MADE BY L&W FAB


    NO DRILLING REQUIRED



    Hardware for complete set (1 driver and 1 passenger):


    (6) plastic end caps for 1.75 x .120 tube


    (12) SAE ½” flat washers


    (6) ½” lock washers


    (6) ½13 THIN nylon insert locknut


    (6) ½”13 x 1” GR8 hex bolts


    (4) pro xp front frame PIN (L&W made)


    (2) pro xp rear frame PIN (L&W made)

    Select options
  • PRO R / Turbo R Winch Mount

    $150.00

    Fitment: 2022 PRO R/ Turbo R

    Must remove factory bull bar to be used.
    Works with 3500-6k winches.
    Nice, clean installation.

     

    Fairlead and Winch purchased separately

    Select options
  • PRO Grill WITHOUT Lightbar

    $165.00

    PRO XP/R GRILL

    FITMENT: All Pro XP models and Pro R/ Turbo R models

    Easily snaps in and out.

    Not screwed to the machine.

    Must drill 4 holes to install snap tab.

    Side Vent color will be the same color you choose for the grill overlay color.

    Side Vents DO NOT WORK WITH PRO XP MODELS

    TO PURCHASE JUST THE SIDE VENTS PLEASE CLICK THE LINK BELOW:

    https://landwfab.com/product/pro-r-turbo-r-side-vents/

    Select options
  • PRO R 4 Seater Tree Kickers

    $1,050.00$1,150.00

    2022-CURRENT POLARIS RZR PRO R 4 SEAT TREE KICKERS

    MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
    PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
    COMES RAW OR ANY POLARIS OEM COLOR
    HEAVY DUTY THROUGH-FRAME HARDWARE MADE BY L&W FAB
    NO DRILLING REQUIRED
    **2PC DESIGN
    DESIGNED FOR 74” MACHINES
    KICKS OUT 9”

    Hardware for complete set (1 driver and 1 passenger):
    (6) plastic end caps for 1.75 x .120 tube
    (16) SAE ½” flat washers
    (8) ½” lock washers
    (8) ½-13 THIN nylon insert locknut
    (8) ½”-13 x 1” GR8 hex bolts
    (8) 3/8-16 X 1” STAINLESS STEEL ALLEN HEAD BOLTS
    (6) pro xp front frame PIN (L&W made)
    (2) pro xp rear frame PIN (L&W made)

    Select options
  • PRO R 2 SEAT CAGE

    $1,200.00$1,700.00

    PRO R 2 SEAT CAGE

    FITMENT: 2022 up Polaris PRO R 2 seat all models


    Made from 1.75 x .120 DOM


    Comes standard with front grab handles


    7 chop over head

    IMPORTANT CAGE INFORMATION
    ALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.
     
    -IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.
    Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.
    Please allow 24 – 48hrs for an email response with your quote.
    -ALSO PLEASE NOTE ALL SALES ARE FINAL.
     
    -PICKUP INFORMATION
    When placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.

    Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.

     

    Please indicate color of cage and roof, if you chose the powder coat option. (IF YOU CHOOSE A RAW CAGE, YOU MUST CHOOSE A RAW ROOF!)

    We will not add options for lower windshield bar or intrusion bars.

    Select options
  • PRO R- REAR SWAY BAR LINKS

    $140.00

    POLARIS RZR PRO R REAR SWAY BAR LINKS (ALL MODELS)

    FITMENT:2022CURRENT RZR PRO R ALL MODELS


    Made from 6061 T6 billet aluminum


    2x stronger than OEM


    Adds to the look and strength of your machine

    Comes as a pair (driver and passenger) along with all necessary spacers and hardware

    Add to cart
  • PRO R Trailing Arms

    $1,500.00$1,600.00

    POLARIS PRO R HC Toe Delete TRAILING ARMS
    Fitment: 2022- current Polaris Pro R.

    Features A TOE LINK DELETE. These will do away with the toe link and replace it with a short,
    adjustable lockout bar made by L&W.

    Offers up to 5” of clearance over factory trailing arms.
    Can still run factory offset wheels
    Comes with new bolts for the new toe link delete.
    Nothing else needed. Comes ready to bolt on!
    Trailing arms are made Made from 3/16 and ¼” HRPO plate, and 1.75” x .250 wall tubing
    Toe link delete bar made from 4140 steel and 304SS adjuster, utilizing a 3/4” heim.

     

    Green toe link piece in featured photos comes standard BLACK!

    Select options
  • Pro R/ Turbo R- Front Bumper

    $325.00$375.00

    FITMENT: 2022-CURRENT Pro R/Turbo R
    Made from 11ga HRPO
    Fits most winches up to 6k pounds
    Factory bull bar and lower valance plastics are not used
    Color options for bumper and overlays separate (mesh will always be black)
    **must be used with L&W winch mount**

    Select options
  • PRO R/ TURBO R -Side Vents

    $80.00

    Side Vents – 

    FITMENT: All Pro R/ Turbo R models

     

    Select options
  • PRO R 4 Seat Cage

    $2,000.00$2,500.00

    Pro R 4 SEAT CAGE

    Fits 2022-current Polaris PRO R 4 SEATER
    Cages are made from 1.75” DOM.
    Comes with new bolts for C and D mounts
    7” chop measured at B Pillar (Driver head)

    IMPORTANT CAGE INFORMATION
    ALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.
     
    -IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.
    Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.
    Please allow 24 – 48hrs for an email response with your quote.
    -ALSO PLEASE NOTE ALL SALES ARE FINAL.
     
    -PICKUP INFORMATION
    When placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.

    Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.

    Please indicate color of cage and roof, if you chose the powder coat option. (IF YOU CHOOSE A RAW CAGE, YOU MUST CHOOSE A RAW ROOF!)

    We will not add options for lower windshield bar or intrusion bars.

    Select options

Click here to assign a widget for this area.