Category: RS1

RS1

Showing all 16 results

  • 1K/TURBO/RS1- Direct Bolt Radius Rods

    $240.00$675.00

    THIS LISTING IS FOR 1K/TURBO/RS1 MODELS ONLY.

    2014-2023 models

    This listing is for the Direct Bolt Radius Rods.

    The lowers are High clearance. 

    Includes all spacers needed for install. 

    They are 6061 Aluminum, and made in the USA. 

    These Radius Rods hold a Lifetime Warranty. 

    Select options
  • 1K/Turbo Tie Rods – Factory Style

    $189.00$325.00

    These Tie Rods Fit Polaris RZR 1000 and Turbo

    2014-2024 models

    Specs on the Rods:

    These are factory style ball and socket tie rods. 

    This listing is for a SET

    6061 Aluminum. 

    Made in America

    Lifetime Warranty on rod itself.

    Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end) 

    To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. **2016 Turbo will always be M14**

     

    Factory ends are not warrantied, only the tie rod itself. 

     

    Specs for HD Rebuild-able Tie Rod Ends:

    Fully rebuildable

    Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

    100 percent made in USA

    This product holds an 18 month warranty

    Options:

    1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)

    2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)

    https://landwfab.com/product-category/rzr-parts/tie-rods/

    https://www.facebook.com/landwfab/

     

    Select options
  • Radius Plate- 1K/TURBO/RS1

    $115.00$140.00

    2014-2023 models

    This radius plate has a lifetime warranty.

    Made from 6061 Aluminum.

    We make this product in Temple, Ga. 

    1K/ Turbo/ RS1

    DOES NOT WORK WITH FACTORY BUMPER.

    https://landwfab.com/product-category/rzr-parts/radius-rods/

    https://www.facebook.com/landwfab/

    Select options
  • Clevis Style Tie Rods (1K/Turbo)

    $215.00

    These are clevis style tie rods (heavy duty).

    This listing is for a SET

    Tie Rod ends are not consistent across all models or years. Please make sure to measure the rack end of stock tie rods to be sure of which size you need.

    To determine what size you need, please measure the end of your tie rod that screws into the rack, if the measurement is less the 1/2″ you will need M14, if it is more then 1/2″ you will need M16.

    These tie rods are made to work well for a racing style application. 

    6061 Aluminum. 

    Made in America

    Life Warranty. 

    Ends are not warrantied, only the tie rod itself. 

     

    Select options
  • Keller Ball Joint

    $130.00$510.00

    If you are needing ball joints for a full set (4) of A Arms, please choose a set of 4. 

    If you are needing them for Uppers, choose a set of 2. 

    If you are needing them for Lowers, choose a set of 2.

     

    The Mega Ball Joints are used for our mega ball joint a arms. The will not fit a regular a arm.

    These ball joints are for rzr only (XP, TURBO, RS1, PRO XP, TURBO S). They do not fit a general or Ranger. 

     These ball joints have a hardened body and stem. Stem is built from AMERICAN made 4340 and hardened for maximum strength and wear resistance. Adjustable and greaseable with a replaceable boot.

    Select options
  • 2 Heim-1K/TURBO/RS1- Radius Rods

    $240.00$465.00

    THIS LISTING IS FOR 1K/TURBO/RS1 MODELS ONLY.

    2014-2023 models

    This listing is for the 2 Heim Radius Rods.

    The lowers are High clearance. 

    Includes all spacers needed for install. 

    PLEASE NOTE THAT IF YOU HAVE GEN3 SUPERATV PORTALS YOU WILL NEED TO PURCHASE THE UPPER ADJUSTABLE RADIUS RODS (1 HEIM or 2 HEIM) in order for your suspension to have enough room to travel without busting the portal bracket ear. 

    They are 6061 Aluminum, and made in the USA. 

    These Radius Rods hold a Lifetime Warranty. 

    Does not include radius plate, to purchase radius plate click here

    FITMENT:

    10mm is for year models 2014 to early 2017

    12mm is for year models Late 2017-2023

    If your year model falls in the mid 2017 range, you can determine your bolt size by the socket size. If the socket is 15mm, then you will need a 10mm bolt. If it is a 18mm, then you will need the 12mm bolt.

    Select options
  • L&W Sak- It Scrap Sak

    $38.00

    These are the Sak-It Brand Scrap Sak’s with our L&W Logo.

    You can only get these here at landwfab.com

    Don’t leave your trash junking up your ride, when you can Sak-It!

    Add to cart
  • RS1 Diff Plate

    $225.00

    Made of 11ga steel

    Powder Coated Black

    All hardware included

    No wiring included.  Wiring can be done by by splicing into the factory harness.

    Instructions for cutting and Diff installation not included at this time, but can be found on Internet.

    This version doesn’t allow use of winch mounting over the differential.

     

    DOES NOT COME RED. Red is for Photo purposes ONLY.

    Add to cart
  • 1.25″ Brake Line Clamps

    $45.00$60.00

    Fit’s 1K/TURBO

    Does Not fit Turbo S or Pro XP

     

    Select options
  • RS1 A-Arms

    $400.00$840.00

    These High Clearance A Arms are raw material. 1 1/4 tubing.120 wall dom.
    L and W offers a life time warranty on bending and breaking the arm.

    Please select raw in the color options if you do not want powder coating.

    These A Arms do not require new bushings. You may use your factory bushings. 

    https://www.facebook.com/landwfab/

    Select options
  • 1 Heim-1K/TURBO/RS1- Radius Rods

    $240.00$465.00

    THIS LISTING IS FOR 1K/TURBO/RS1 MODELS ONLY.

    2014-2023 models

    This listing is for the 1 Heim Radius Rods.

    The lowers are High clearance. 

    Includes all spacers needed for install. 

    PLEASE NOTE THAT IF YOU HAVE GEN3 SUPERATV PORTALS YOU WILL NEED TO PURCHASE THE UPPER ADJUSTABLE RADIUS RODS (1 HEIM or 2 HEIM) in order for your suspension to have enough room to travel without busting the portal bracket ear. 

    They are 6061 Aluminum, and made in the USA. 

    These Radius Rods hold a Lifetime Warranty. 

    Does not include radius plate, to purchase radius plate click here

    FITMENT:

    10mm is for year models 2014 to early 2017

    12mm is for year models Late 2017-2023

    If your year model falls in the mid 2017 range, you can determine your bolt size by the socket size. If the socket is 15mm, then you will need a 10mm bolt. If it is a 18mm, then you will need the 12mm bolt.

    Select options
  • Seat lowering Base Hardware Kit

    $15.00$30.00

    This Listing is for a SET for TWO seat lowering base hardware kits or for a SINGLE seat base.

    This is not required with the purchase of a new set of bases. 

    This is only a replacement kit. 

    This hardware kit is a replacement for RZR as well as General seat lowering bases. 

    Select options
  • 1K/Turbo/RS1- Steel HD Trailing Arms

    $825.00$875.00

    FITMENT: 1K/TURBO/RS1

    These Steel HD Trailing Arms are built from 1″ 1/2 x 3 3/16 Rectangle Tubing.

    You may choose the color of the Trailing arm itself, however the brake line logo bracket comes powder coated black. 

    These trailing arms hold a lifetime warranty. 

    They are not under warranty for racing applications, and there is no warranty on wear parts. (Uniball/Misalignments). 

    Select options
  • Receiver Hitch Plate for Factory Replacement

    $145.00

    This receiver hitch plate is for anyone that isn’t planning on running a bumper, or is running bumper that requires the use of a factory shaped radius rod plate. 

    It is just a direct replacement of the factory radius rod plate with an added receiver hitch.

    This only comes in black.

    Material Specs:

    1/4″ thick HRPO steel. 

    Receiver protrusion for all variations is 5-15/16″

    All variations accepts standard 2″ receiver with 5/8″ pin

    Select options
  • Offroad Rugged X-Grip Phone / Tablet Mount for Roll Cage

    $65.33$125.85
    • American made
    • Comes with Ram Mounts X-Grip
    • Each clamp is 1/2″ thick
    • These will fit 1.75″ tubing
    • Great way to mount your phone to any tubing
    • Made from 6061-T6 Billet Aluminum

     Large Ram mount phone holder will except a phone width from 1.75″ to 4.50″

     Small Ram mount tablet holder will except a tablet width from 2.50″ to 5.75″

     Large Ram mount tablet holder will except a tablet width from 6.25″ to 8.10″ and 10.25″ long

    Select options
  • Receiver Hitch Add On Plate

    $145.00

    This is the receiver hitch for anyone that currently has an L and W radius rod plate steel/billet that wants to add a receiver hitch. 

    It can be used with our bumpers as well.  

    Only comes in black.

    Material Specs:

    1/4″ thick HRPO steel. 

    Receiver protrution for all variations is 5-15/16″

    All variations accepts standard 2″ receiver with 5/8″ pin

    Add to cart

Click here to assign a widget for this area.