0$0.00

No products in the cart.

Category: RZR

RZR

At L and W Fab we strive to make our RZR products the best so that you can trust you will have the smoothest and most enjoyable ride possible.

Showing 1–28 of 115 results

  • Seat Lowering Bases

    $70.00$100.00
    INTRODUCING THE ALL NEW L&W SEAT LOWERING BASE! 
     

    -Easier to Install
    -Uses Stock Slider
    -Slider Plate integrated 
    -Harness 5th Point Mount 
    -Lowers 2” 
    -Reclines 5.2 degrees

    • Powder Coated Black 
    • ALL HARDWARE IS INCLUDED, you do not need to purchase it separately.
     
    Select options
  • Direct Bolt Radius Rods (1K/Turbo)

    $225.00$489.00

    PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING

    Includes all spacers needed for install. 

    Does not include radius plate, to purchase radius plate click here

    These radius rods are direct bolt and non- adjustable.

    Small Bolt 10mm are used for Models 2014 to mid 2017

    Big Bolt 12mm began being used in mid 2017

    If your year model fall in the mid 2017 range, you can determine your bolt size by the socket size. If the socket is 15mm, then you will need a 10mm bolt. If it is a 18mm, then you will need the 12mm bolt. 

    Made from 6061 Aluminum. 

    Select options
  • Tie Rods – Factory Style

    $189.00$339.99

    These Tie Rods Fit Polaris RZR 1000 and Turbo

    Specs on the Rods:

    These are factory style ball and socket tie rods. 

    This listing is for a SET

    6061 Aluminum. 

    Made in America

    Lifetime Warranty on rod itself.

    Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end) 

    To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. **2016 Turbo will always be M14**

     

    Factory ends are not warrantied, only the tie rod itself. 

     

    Specs for HD Rebuild-able Tie Rod Ends:

    Fully rebuildable

    Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

    100 percent made in USA

    This product holds an 18 month warranty

    Options:

    1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)

    2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)

    https://landwfab.com/product-category/rzr-parts/tie-rods/

    https://www.facebook.com/landwfab/

     

    Select options
  • High Clearance A Arms 1K/Turbo (2017- Current Models)

    $250.00$585.00

    PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING

    These A Arms are raw material. 1 1/4 tubing.120 wall dom.
    L and W offers a life time warranty on bending and breaking the arm.

    Please select raw in the color options if you do not want powder coating.

    These A Arms do not require new bushings. You may use your factory bushings. 

     

    Select options
  • 1 Heim Adjustable Radius Rods- (1K/Turbo)

    $225.00$489.00

    The uppers have 1 hiem for adjustment. 

    Small Bolt 10mm are used for Models 2014 to mid 2017

    Big Bolt 12mm began being used in mid 2017

    If your year model fall in the mid 2017 range, you can determine your bolt size by the socket size. If the socket is 15mm, then you will need a 10mm bolt. If it is a 18mm, then you will need the 12mm bolt. 

    These will also fit a RS1

    Includes all spacers needed for install. 

    Does not include radius plate, to purchase radius plate click here

    They are 6061 Aluminum , and made in the USA. 

    These Radius Rods hold a Lifetime Warranty 

    PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING

    Select options
  • A Arm Bushing

    $60.00$125.00

    Bushing by Performance Side X Side

     

    These bushings WILL NOT fit the s models, including the Turbo S. They will only fit the 1000 and Turbo models. 

     

    They do not fit a general

    Select options
  • 2 Heim Adjustable Radius Rods (1K/Turbo)

    $225.00$489.00

    PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING

    Small Bolt 10mm are used for Models 2014 to mid 2017

    Big Bolt 12mm began being used in mid 2017

    Made from 6061 If your year model fall in the mid 2017 range, you can determine your bolt size by the socket size. If the socket is 15mm, then you will need a 10mm bolt. If it is a 18mm, then you will need the 12mm bolt. Aluminum. 

    Includes all spacers needed for install. 

    Does not include radius plate, to purchase radius plate click here

    Select options
  • Clevis Style Tie Rods (1K/Turbo)

    $189.00

    These are clevis style tie rods (heavy duty).

    This listing is for a SET

    Tie Rod ends are not consistent across all models or years. Please make sure to measure the rack end of stock tie rods to be sure of which size you need.

    To determine what size you need, please measure the end of your tie rod that screws into the rack, if the measurement is less the 1/2″ you will need M14, if it is more then 1/2″ you will need M16.

    These tie rods are made to work well for a racing style application. 

    6061 Aluminum. 

    Made in America

    Life Warranty. 

    Ends are not warrantied, only the tie rod itself. 

     

    Select options
  • Radius Plate

    $89.00$114.00

    This radius plate has a lifetime warranty.

    Made from 6061 Aluminum.

    This will work with all of our Radius Rods except the Turbo S. It has a separate plate. 

    Select options
  • Keller Ball Joint

    $130.00$510.00

    If you are needing ball joints for a full set (4) of A Arms, please choose a set of 4. 

    If you are needing them for Uppers, choose a set of 2. 

    If you are needing them for Lowers, choose a set of 2.

     

    The Mega Ball Joints are used for our mega ball joint a arms. The will not fit a regular a arm.

    These ball joints are for rzr only. They do not fit a general. 

     These ball joints have a hardened body and stem. Stem is built from AMERICAN made 4340 and hardened for maximum strength and wear resistance. Adjustable and greasable with a replaceable boot.

    Select options
  • Sway Bar Links

    $85.00

    PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING

     

    Made of 6061

    Select options
  • 1.75″ Forward 1k/Turbo High Clearance A Arms (Full Kit)

    $535.00$585.00

    L and W offers a life time warranty on bending and breaking the A arms.

    Will NOT work with 6+1 or 5+2 Offset Wheels.

    Please select raw in the color options if you do not want powder coating.

    These now take 17 and up model bushings.

    If you have a 14-16 model, you will need to purchase 17 & up model bushings.

    Bushing Sold Separately. Please see link in description for bushings.

    PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING

    Select options
  • Aluminum Drink Carrier

    $95.00 $85.00

    Made from  Aluminum

    Mounts on T-Bar 

     

    Add to cart
  • Lower Radius Rods for 1000/Turbo

    $225.00$275.00

    Made from 6061 Aluminum

    This listing is for 1000/Turbo models only.

    This is not the listing for Turbo S. 

    If your year model fall in the mid 2017 range, you can determine your bolt size by the socket size. If the socket is 15mm, then you will need a 10mm bolt. If it is a 18mm, then you will need the 12mm bolt. 

    Includes all spacers needed for install. 

    Does not include radius plate, to purchase radius plate click here

    Select options
  • 1K/ Turbo 2019-Current Polaris Race Style Winch Bumper

    $250.00$300.00

     

    These bumpers will fit a 2019-Current Turbo, Turbo S, and 1000 Polaris RZR

     

    Select options
  • Turbo S Tie Rods

    $199.00$299.99

    Turbo S Tie Rods: 

    This listing is for a SET

    Comes with spindle ends.

    6061 Aluminum. 

    Made in America

    Lifetime Warranty on the Tie Rod itself.

    Factory ends are not warrantied, only the tie rod itself. 

     

    Specs for HD Rebuild-able Tie Rod Ends:

    Fully rebuild-able

    Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

    100 percent made in USA

    This product holds an 18 month warranty

    Select options
  • Direct Bolt Radius Rods -Turbo S

    $255.00$515.00

    PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING

    Turbo S Direct Bolt Radius Rods

    Made from Billet Aluminum. 

    Includes all spacers needed for install.

    Does not include Turbo S Radius plate, to purchase a radius plate click here.

     

    Select options
  • Spindle End for Tie Rods

    $20.00$30.00

    This is a REPLACEMENT spindle end for tie rods. 

    If you have just purchased our tie rods, the spindle end will come with them. 

    This is just a replacement piece. 

    Select options
  • Seat Lowering Base (800/900 Models)

    $70.00$100.00

    This listing is for our seat lowering base. 

    We have a lot of questions regarding if it will work with a 800/900 model RZR.

    This seat lowering base will work with a 1000 seat placed in an 800/900 model. 

    It WILL NOT work with the factory 800/900 seats. 

    Select options
  • 5/8 Heim

    $15.00

    ALL factory style tie rods take LEFT hand heims, not matter what side. All Clevis style tie rods take a right or left hand. Please make sure to check which thread you have on which side.

    Select options
  • Brake Line Clamps

    $45.00$60.00

    Why settle for zip ties when you could have these aluminum brake line clamps! Match the rest of your L&W Bling today by completing your look with these brake line clamps!

    Select options
  • Factory Tie Rod Ends (1000 / Turbo /Turbo S/ PRO XP / RS1 Models)

    $18.00$119.99

    This is a replacement for our factory tie rods ends for the 1000 and turbo models.

    Please see photo description for warranty information 

    To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. 2016 Turbo will always be M14

    Select options
  • Uniball and Snap Ring

    $8.00$25.00

    Uniball and Snap ring for radius rods. 

    Select options
  • Turbo S A Arms

    $350.00$700.00

    These Turbo S Arms are made from 1.5″ tubing, 120 wall dom, and have some 1.25 bracing 

    Uses the factory bushings. 

    They are covered by a lifetime warranty and are made in the USA. 

     

    Please Place color in the year model section and in the notes, if choosing the powder coated option. 

    Select options
  • Aftermarket Mount Plate for Milwaukee Packout

    $120.00

    Milwaukee Packout mount plate:

    Works with all Polaris RZR XP1000/Turbo, Turbo S. Also works with Highlifter editions.

    Made with 10ga HRPO steel.
    Easily installed/removed with no tools using the supplied hardware.
    Mount is slotted for different configurations of boxes to maximize trunk room for coolers.
    Most coolers under 26qt will still fit.

    Add to cart
  • RS1 A Arms

    $325.00$660.00

    These High Clearance A Arms are raw material. 1 1/4 tubing.120 wall dom.
    L and W offers a life time warranty on bending and breaking the arm.

    Please select raw in the color options if you do not want powder coating.

    These A Arms do not require new bushings. You may use your factory bushings. 

    PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING

    https://www.facebook.com/landwfab/

    Select options
  • Cooler Mount for 1k/ Turbo

    $85.00

    Cooler Mounts:

    Fits a 1K/Turbo (For Turbo S, please see Turbo S Listing)

    1. Works with All RZR XP including highlifter edition
    2. Uses eye bolt Grip mount
    3. All hardware included
    4. Made from 3/16 HRPO
    5. Fully adjustable to fit over 30 different cooler models including these top models:
       i) YETI Tundra 35
      ii) RTIC 20
      iii) YETI 20
      iv) Ozark 26
      v) NICE 26
    6. Comes powder coated black

     

    [video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/RZR-XP-TURBO-COOLER-MOUNT.mp4"][/video]
    Add to cart
  • Aluminum Trailing Arms (1K/Turbo)

    $850.00

    These trailing arms have a billet  finish, and the steel component is powder coated black. 

    This listing is for Turbo and 1000 models only

     

    PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS and/or POWDER COATING

    Lifetime  Warranty!

     

    Add to cart