Category: RZR
RZR
Showing 81–120 of 181 results
-
4 Seater Pro XP Cage
$2,000.00 – $2,500.00Select options–IMPORTANT CAGE INFORMATIONALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.Please allow 24 – 48hrs for an email response with your quote.-ALSO PLEASE NOTE ALL SALES ARE FINAL.-PICKUP INFORMATIONWhen placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.
Please indicate color of cage and roof, if you chose the powder coat option.
-
PRO XP – RADIUS ROD PLATE
$165.00 – $185.00Select optionsFitment: 2020–current Polaris Pro XP
Made from 6061–T6 Billet aluminum
Adds strength as well as looks
Comes with pull pointPLEASE NOTE: If powder coat option is chosen only the plate itself will be powdered, the pull point will always be billet aluminum.
-
PRO R -2 SEAT TREE KICKERS
$670.00 – $735.00Select options2022–CURRENT POLARIS RZR PRO R 2 SEAT (ALL MODELS) TREE KICKERS
FITMENT:
Fits All trims of The RZR PRO R.
MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
COMES RAW OR ANY POLARIS OEM COLOR
HEAVY DUTY THROUGH–FRAME HARDWARE MADE BY L&W FAB
NO DRILLING REQUIRED
Hardware for complete set (1 driver and 1 passenger):
(6) plastic end caps for 1.75 x .120 tube
(12) SAE ½” flat washers
(6) ½” lock washers
(6) ½–13 THIN nylon insert locknut
(6) ½”–13 x 1” GR8 hex bolts
(4) pro xp front frame PIN (L&W made)
(2) pro xp rear frame PIN (L&W made) -
900S /1000S Tie Rods
$189.00 – $295.00Select optionsThis listing is for 900 S / 1000 S Tie Rods
These are for the S models ONLY
They are made out of 6061 Aluminum.
They have a billet finish.
Made in America.
Lifetime Warranty on the rods.
Factory ends are not warrantied, only the tie rod itself.
Specs for HD Rebuild-able Tie Rod Ends:
Fully rebuild-able
Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished
100 percent made in USA
This product holds an 18 month warranty
-
PRO Grill WITHOUT Lightbar
$165.00Select optionsPRO XP/R GRILL
FITMENT: All Pro XP models and Pro R/ Turbo R models
Easily snaps in and out.
Not screwed to the machine.
Must drill 4 holes to install snap tab.
Side Vent color will be the same color you choose for the grill overlay color.
Side Vents DO NOT WORK WITH PRO XP MODELS
TO PURCHASE JUST THE SIDE VENTS PLEASE CLICK THE LINK BELOW:
https://landwfab.com/product/pro-r-turbo-r-side-vents/
-
PRO R 4 Seater Tree Kickers
$1,050.00 – $1,150.00Select options2022-CURRENT POLARIS RZR PRO R 4 SEAT TREE KICKERS
MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
COMES RAW OR ANY POLARIS OEM COLOR
HEAVY DUTY THROUGH-FRAME HARDWARE MADE BY L&W FAB
NO DRILLING REQUIRED
**2PC DESIGN
DESIGNED FOR 74” MACHINES
KICKS OUT 9”Hardware for complete set (1 driver and 1 passenger):
(6) plastic end caps for 1.75 x .120 tube
(16) SAE ½” flat washers
(8) ½” lock washers
(8) ½-13 THIN nylon insert locknut
(8) ½”-13 x 1” GR8 hex bolts
(8) 3/8-16 X 1” STAINLESS STEEL ALLEN HEAD BOLTS
(6) pro xp front frame PIN (L&W made)
(2) pro xp rear frame PIN (L&W made) -
PRO XP- Steel HD Trailing Arms
$825.00 – $875.00Select optionsFITMENT: 2020-CURRENT PRO XP
These Steel HD Trailing Arms are built from 1″ 1/2 x 3 3/16 Rectangle Tubing.
You may choose the color of the Trailing arm itself, however the brake line logo bracket comes powder coated black.
These trailing arms hold a lifetime warranty.
They are not under warranty for racing applications, and there is no warranty on wear parts. (Uniball/Misalignments).
-
Receiver Hitch Plate for Factory Replacement
$145.00Select optionsThis receiver hitch plate is for anyone that isn’t planning on running a bumper, or is running bumper that requires the use of a factory shaped radius rod plate.
It is just a direct replacement of the factory radius rod plate with an added receiver hitch.
This only comes in black.
Material Specs:
1/4″ thick HRPO steel.
Receiver protrusion for all variations is 5-15/16″
All variations accepts standard 2″ receiver with 5/8″ pin
-
1K/Turbo-Rear Bumper (14-18 Model)
$350.00 – $400.00Select optionsThis Listing is for 1k/turbo 14-18 Model only!
It WILL NOT fit a 2019-up model rzr.This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. Made from 1.75 x .120 Wall Steel
CHECK OUT our Additional Bumper Add Ons and Upgrades Below!
-
PRP 4.2 Harness
$110.99Select optionsL & W now carries PRP 4.2 UTV harnesses. This sleek 4 point harness will provide superior safety for your UTV, all while remaining comfortable for hours and miles of riding! The EZ adjuster feature allows for a quick and easy adjustment in even the muddiest conditions. This harness is available in a variety of colors: Red, Blue, Black, Silver, and Orange! Make an uncomfortable UTV harness a thing of the past in your riding experience.
-
1K/TURBO- Receiver Hitch Plate for L&W Bumper
$145.00Select optionsThis is a replacement for the steel or billet radius plates that are used in correspondence with an L&W Bumper.
They come in black only.
Material Specs:
1/4″ thick HRPO steel.
Receiver protrusion for all variations is 5-15/16″
All variations accepts standard 2″ receiver with 5/8″ pin
-
Offroad Rugged X-Grip Phone / Tablet Mount for Roll Cage
$65.33 – $125.85Select options- American made
- Comes with Ram Mounts X-Grip
- Each clamp is 1/2″ thick
- These will fit 1.75″ tubing
- Great way to mount your phone to any tubing
- Made from 6061-T6 Billet Aluminum
Large Ram mount phone holder will except a phone width from 1.75″ to 4.50″
Small Ram mount tablet holder will except a tablet width from 2.50″ to 5.75″
Large Ram mount tablet holder will except a tablet width from 6.25″ to 8.10″ and 10.25″ long
-
Race Style REAR Bumper (2019-2023)
$325.00 – $375.00Select optionsThis listing is for 1K/TURBO models only.
This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install.
Made from 1.75 x .120 Wall Steel
CHECK OUT our Additional Bumper Add Ons and Upgrades Below!
-
TURBO R 2 SEAT CAGE
$1,300.00 – $1,700.00Select optionsTURBO R 2 SEAT CAGE
Fits 2022-current Polaris TURBO R 2 SEATER
Cages are made from 1.75” DOM.
7” chop measured at B Pillar (Driver head)–IMPORTANT CAGE INFORMATIONALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.Please allow 24 – 48hrs for an email response with your quote.-ALSO PLEASE NOTE ALL SALES ARE FINAL.-PICKUP INFORMATIONWhen placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.
Please indicate color of cage and roof, if you chose the powder coat option. (IF YOU CHOOSE A RAW CAGE, YOU MUST CHOOSE A RAW ROOF!)
We will not add options for lower windshield bar or intrusion bars.
-
RZR XP TURBO/ TURBO S- SIDE VENT COVERS
$80.00 – $205.00Select optionsPOLARIS RZR XP TURBO/ TURBO S- SIDE VENT COVERS
Made from 18ga steel
Comes with all necessary hardware. Drilling requiried
Add some bling to your XP Turbo while also protecting the frog skin
Can be bought as 2pc (outside only/Inside Only) or 4 pc(inside and outside)- Mesh will be black *
ONLY FIT ’17 and up models!
-
Polaris RZR XP 1000 Heavy Duty Axles – Rhino 2.0
$239.95Select optionsFitment
- Polaris RZR XP 1000 : 2014+
- Polaris RZR XP 4 1000 : 2014+
- Polaris RZR XP 1000 High Lifter Edition : 2016+
- Polaris RZR XP 1000 Trails & Rocks Edition (AZ) : 2017+
NOTE: Not compatible with Anti-Lock Brake Systems (ABS)
Features
- 100% stronger than stock
- Utilizes the Rhino 2.0 Formula
- Size: Massive 4mm increase in size!
- Materials
- Heat Treatment
- Constructed of 4340 chromoly steel and finished with a proprietary heat treatment
- Industry leading 18-month warranty
- Field and lab tested for extreme strength and endurance
- CAD drawn for expert precision
-
RZR XP- Long Travel Kit
$2,500.00 – $2,680.00Select optionsFITMENT:
2014–2023 RZR XP1000/XP TURBO.
Give your 64” RZR XP A wider, and more stable stance.
MADE OF DOMESTIC DOM (1.5X.120 WALL AND 1.25X.120 WALL)
Made from HRPO .250 sheet steel and 1.5×3–3/16 thick tubing
NO DRILLING REQUIREDTHIS KIT ONLY COMES WITH FORWARD A-ARMS
These take 17 and up model bushings.
If you have a 14-16 model, you will need to purchase bushings.
Only Steel Parts (A -Arms and Trailing Arms will come powder coated). Additional add on charge for powder coating radius rods is available.
Comes with everything needed except axles.
Requires Turbo S axles.
**NON TURBO MACHINES WILL NEED FRONT DIFF CHANGED TO ACCEPT A TURBO AXLE -
Polaris RZR XP Turbo Heavy Duty Axles – Rhino 2.0
$239.95Select optionsFITMENT
-
- RZR XP Turbo : 2016+
- RZR XP 4 Turbo : 2016+
Will NOT Fit 2018+ RZR Turbo SNote: May require some minor grinding for proper fitment, see instructions.
FEATURES
- 100% stronger than stock
- Utilizes the Rhino 2.0 Formula
- Size: A massive 4mm increase in size!
- Materials
- Heat Treatment
- Constructed of 4340 chromoly steel and finished with a proprietary heat treatment
- Industry leading 18 month warranty
- Field and lab tested for extreme strength and endurance
- CAD drawn for expert precision
-
-
PRO R 2 SEAT CAGE
$1,200.00 – $1,700.00Select optionsPRO R 2 SEAT CAGE
FITMENT: 2022 up Polaris PRO R 2 seat all models
Made from 1.75 x .120 DOM
Comes standard with front grab handles
7” chop over head–IMPORTANT CAGE INFORMATIONALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.Please allow 24 – 48hrs for an email response with your quote.-ALSO PLEASE NOTE ALL SALES ARE FINAL.-PICKUP INFORMATIONWhen placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.
Please indicate color of cage and roof, if you chose the powder coat option. (IF YOU CHOOSE A RAW CAGE, YOU MUST CHOOSE A RAW ROOF!)
We will not add options for lower windshield bar or intrusion bars.
-
PRO R- REAR SWAY BAR LINKS
$140.00Add to cartPOLARIS RZR PRO R REAR SWAY BAR LINKS (ALL MODELS)
FITMENT:2022–CURRENT RZR PRO R ALL MODELS
Made from 6061 T6 billet aluminum
2x stronger than OEM
Adds to the look and strength of your machine
Comes as a pair (driver and passenger) along with all necessary spacers and hardware -
POLARIS RZR XP TURBO S HEAVY-DUTY AXLES RHINO 2.0
$239.95Select optionsFitment
- Polaris RZR XP Turbo S : 2018+
- Polaris RZR XP 4 Turbo S : 2019+
NOTE: Not compatible with Anti-Lock Brake Systems (ABS)
Features
- 25% stronger than stock
- Made with 4340 chromoly steel
- Proprietary heat treatment for superior strength and longevity
- Operates at high CV angles
- A massive 4mm increase in shaft size
- Field and lab tested for extreme strength and endurance
- Industry-leading 18-month warranty
-
PRO R Trailing Arms
$1,500.00 – $1,600.00Select optionsPOLARIS PRO R HC Toe Delete TRAILING ARMS
Fitment: 2022- current Polaris Pro R.Features A TOE LINK DELETE. These will do away with the toe link and replace it with a short,
adjustable lockout bar made by L&W.Offers up to 5” of clearance over factory trailing arms.
Can still run factory offset wheels
Comes with new bolts for the new toe link delete.
Nothing else needed. Comes ready to bolt on!
Trailing arms are made Made from 3/16 and ¼” HRPO plate, and 1.75” x .250 wall tubing
Toe link delete bar made from 4140 steel and 304SS adjuster, utilizing a 3/4” heim.Green toe link piece in featured photos comes standard BLACK!
-
TURBO R Trailing Arms
$1,500.00 – $1,600.00Select optionsPOLARIS TURBO R HC Toe Delete TRAILING ARMS
Fitment: 2022- current Polaris Turbo R.Features A TOE LINK DELETE. These will do away with the toe link and replace it with a short,
adjustable lockout bar made by L&W.
Offers up to 5” of clearance over factory trailing arms.
Can still run factory offset wheels
Comes with New bolts for the new toe link delete
Nothing else needed. Comes ready to bolt on!
Trailing arms are made Made from 3/16 and ¼” HRPO plate, and 1.75” x .250 wall tubing
Toe link delete bar made from 4140 steel and 304SS adjuster, utilizing a 3/4” heim.Green toe link piece in featured photos comes standard BLACK!
-
PRO XP FORWARD A Arms (MEGA BALL JOINT)
$700.00 – $750.00Select optionsPRO XP FORWARD A Arms (MEGA BALL JOINT)
1.5 x .120 and 1.25 x .120 DOM
1.75″ Forward offset
Can clear 33-34″ tires
L and W offers a life time warranty on bending and breaking the arm.
Please select raw in the color options if you do not want powder coating.
These A Arms do not require new bushings. You may use your factory bushings.
PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING
For Standard Ball Joint A Arms: https://landwfab.com/product/pro-xp-forward-a-arms/
