Category: Newest Products
Newest Products
Showing 1–40 of 60 results
-
Cooler Mount for 1k/ Turbo
$100.00Add to cartCooler Mounts:
Fits a 1K/Turbo (For Turbo S, please see Turbo S Listing)
1. Works with All RZR XP including highlifter edition
2. Uses eye bolt Grip mount
3. All hardware included
4. Made from 3/16 HRPO
5. Fully adjustable to fit over 30 different cooler models including these top models:
i) YETI Tundra 35
ii) RTIC 20
iii) YETI 20
iv) Ozark 26
v) NICE 26IS NOT COMPATIBLE WITH POLARIS OR PELICAN COOLERS.
6. Comes powder coated black
[video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/RZR-XP-TURBO-COOLER-MOUNT.mp4"][/video] -
Cooler Mount for Turbo S
$100.00Select optionsCooler Mounts:
This listing is for TURBO S ONLY
Cooler Mount (Factory Cage) Specs:
1. Works with All Turbo S with factory cage
2. Made from 3/16 HRPO
3. Comes with all hardware needed
4. Fully adjustable to fit over 30 different cooler models including these top models:
i) YETI Tundra 35
ii) RTIC 20
iii) YETI 20
iv) Ozark 26
v) NICE 26NOT COMPATIBLE WITH PELICAN OR POLARIS COOLERS
[video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/TURBO-S-COOLER-MOUNT-FACTORY-CAGE.mp4"][/video]
5. Comes powder coated blackCooler Mount (Aftermarket Cage) Specs:
1. Works with most Turbo S with aftermarket cage that doesn’t utilize rear support bars.
2. Made from 3/16 HRPO
3. Comes with all hardware
4. Fully adjustable to fit over 30 different cooler models including these top models:
i) YETI Tundra 35
ii) RTIC 20
iii) YETI 20
iv) Ozark 26
v) NICE 26NOT COMPATIBLE WITH PELICAN OR POLARIS COOLERS
[video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/TURBO-S-COOLER-MOUNT-AFTERMARKET-CAGE.mp4"][/video]
5. Comes powder coated black -
RS1 Diff Plate
$225.00Add to cartMade of 11ga steel
Powder Coated Black
All hardware included
No wiring included. Wiring can be done by by splicing into the factory harness.
Instructions for cutting and Diff installation not included at this time, but can be found on Internet.
This version doesn’t allow use of winch mounting over the differential.
DOES NOT COME RED. Red is for Photo purposes ONLY.
-
PRO XP- Sport Bumper
$300.00 – $350.00Select optionsThis listing is for PRO XP models only.
(NON R MODEL)
FITMENT: 19-Current PRO XPThis front bumper comes with all hardware needed to install.
Made of 1.75” x .120” DOM , 11GA and 3/16” plate
Bumper works in CONJUNTION with aftermarket winch mounts.This bumper is not a winch mount- Only a Fairlead mount
Works with most popular aftermarket winch mounts including KFI, SUPERATV, and L&W.
Integrated holes in corners for 3⁄4” blinkersThese bumpers use a 6 inch fairlead.
(fairlead is not included UNLESS purchased as an add on below)
we do not offer custom colors.
-
PRO R/TURBO R- RADIUS ROD PLATE
$160.00 – $180.00Select optionsPRO R/TURBO R RADIUS ROD PLATE
Fitment: 2022–current Polaris Pro R and 2022–current Polaris Turbo R
Made from 6061–T6 Billet aluminum
Adds strength as well as looks
Comes with pull pointThis listing is for the radius plate only.
PLEASE NOTE: If powder coat option is chosen only the plate itself will be powdered, the pull point will always be billet aluminum
-
Turbo R 4 Seater Tree Kickers
$815.00 – $875.00Select options2022-CURRENT POLARIS RZR TURBO R 4 SEAT (ALL MODELS) TREE KICKERS
IDEAL FOR LONG TRAVEL PRO XP ALSO
FITS PRO XP, TURBO R, AND PRO R
MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
COMES RAW OR ANY POLARIS OEM COLOR
HEAVY DUTY THROUGH-FRAME HARDWARE MADE BY L&W FAB
NO DRILLING REQUIRED
**2PC DESIGN
DESIGNED FOR 74” MACHINES
KICKS OUT 9”Hardware for complete set (1 driver and 1 passenger):
(6) plastic end caps for 1.75 x .120 tube
(16) SAE ½” flat washers
(8) ½” lock washers
(8) ½-13 THIN nylon insert locknut
(8) ½”-13 x 1” GR8 hex bolts
(8) 3/8-16 X 1” STAINLESS STEEL ALLEN HEAD BOLTS
(6) pro xp front frame PIN (L&W made)
(2) pro xp rear frame PIN (L&W made) -
Aftermarket Snap In Grill with Light Bar
$185.00Select optionsComes with Light Bar (does not include wiring harness)
Options for outline color and L&W logo
The grill mesh will always be black
Fitment:
Turbo S
19-current models 1K/Turbo
*NOTE: THIS GRILL WILL NOT WORK WITH THE FACTORY POLARIS BUMPER WITHOUT MAKING SLIGHT MODIFICATIONS TO FIT.*
-
Turbo S- Forward A Arms with Adjustable Uppers
$825.00 – $925.00Select optionsNEW PRODUCT PHOTO COMING SOON!
This set of A Arms has adjustable uppers.
The adjustment is in the uppers only, the lowers are direct bolt.
The A Arms are 1.75″ Forward. The adjustable pins have a 1 inch diameter.
You can reuse your stock bushings and stock ball joints.
-
PRO XP FRAME CROSS MEMBER
$135.00 – $260.00Select optionsMade from 3/16 STEEL
The factory prop shaft crossmember is known to bend. When the crossmember bends, it
changes the prop shaft angle, and can lead to premature bearing failure and vibrations.Our crossmembers are 2.5x thicker and add strength where it is needed.
Works with factory or aftermarket bearing carriers.
Bolts in using factory hardwareFITMENT:
2020-CURRENT PRO XP 4 SEAT
2020-CURRENT PRO XP 2 SEAT
2020-CURRENT PRO XP 4 SEAT REAR
-
PRO Grill WITH Lightbar
$185.00Select optionsPRO XP/R GRILL
FITMENT: All Pro XP models and Pro R/ Turbo R models
If you choose to get the Grill it does Come with the Light Bar (does not include wiring harness)
Easily snaps in and out.
Not screwed to the machine.
Must drill 4 holes to install snap tab for main grill.
Side Vent color will be the same color you choose for the grill overlay color.
-
PRO XP Long Travel Kit
$2,750.00 – $3,750.00Select optionsFits 2020-current Polaris PRO XP
Bolt on installation.
No drilling required
This kit adds 4” to each side of a PRO XP giving it a 72” width with stock offset wheels.
Adds 3.5” to the wheelbase.
Front a arms are 1.75” forward offset, and rear trailing arms are 1.75” rear offset, which improves stability.
A arms are made from 1.5” DOM. and are high clearance.
Front and Rear keep factory shock location.
Can use factory PRO XP bushings and factory ball joints.
Only Steel Parts ( A Arms and Trailing Arms will come powder coated ). Additional add on charge for powder coating radius rods is available.
Kit includes:
- Front upper and lower A arms. (Non- Adjustable)( Stock size ball joints only. These are not offered for Mega Ball Joints)
- Set of Tie Rods with L&W HD rebuild-able inner joints.
- High Clearance Steel HD Trailing Arms
- High Clearance Billet Aluminum Radius Rods with adjustable uppers.
- (1) Extended brake line for front passenger side
REQUIRES THE USE OF TURBO S AXLES and RZR XP/TURBO S HUBS that are not included
HUB OEM PART # 5141353-067
WE RECOMMEND A SPRING UPGRADE, AS THIS KIT WILL GREATLY INCREASE THE SOFTNESS OF
THE SPRINGS. (SPRINGS WILL COME POWDER COATED BLACK- ZBROZ)
****If Purchasing Ball Joints or A Arm Bushings, they WILL NOT come installed****
-
Light Bar Mounting Tabs
$55.00Add to cartThese mounting tabs can be used to mount a 30-34 inch light bar or single pods.
They are powder coated black.
They do not come with hardware. You will use the hardware from your cage to mount them.
The tabs mount to the bottom bung of your aftermarket or stock cage.
-
PRO XP – RADIUS ROD PLATE
$165.00 – $185.00Select optionsFitment: 2020–current Polaris Pro XP
Made from 6061–T6 Billet aluminum
Adds strength as well as looks
Comes with pull pointPLEASE NOTE: If powder coat option is chosen only the plate itself will be powdered, the pull point will always be billet aluminum.
-
PRO R -2 SEAT TREE KICKERS
$670.00 – $735.00Select options2022–CURRENT POLARIS RZR PRO R 2 SEAT (ALL MODELS) TREE KICKERS
FITMENT:
Fits All trims of The RZR PRO R.
MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
COMES RAW OR ANY POLARIS OEM COLOR
HEAVY DUTY THROUGH–FRAME HARDWARE MADE BY L&W FAB
NO DRILLING REQUIRED
Hardware for complete set (1 driver and 1 passenger):
(6) plastic end caps for 1.75 x .120 tube
(12) SAE ½” flat washers
(6) ½” lock washers
(6) ½–13 THIN nylon insert locknut
(6) ½”–13 x 1” GR8 hex bolts
(4) pro xp front frame PIN (L&W made)
(2) pro xp rear frame PIN (L&W made) -
PRO Grill WITHOUT Lightbar
$165.00Select optionsPRO XP/R GRILL
FITMENT: All Pro XP models and Pro R/ Turbo R models
Easily snaps in and out.
Not screwed to the machine.
Must drill 4 holes to install snap tab.
Side Vent color will be the same color you choose for the grill overlay color.
Side Vents DO NOT WORK WITH PRO XP MODELS
TO PURCHASE JUST THE SIDE VENTS PLEASE CLICK THE LINK BELOW:
https://landwfab.com/product/pro-r-turbo-r-side-vents/
-
PRO R 4 Seater Tree Kickers
$1,050.00 – $1,150.00Select options2022-CURRENT POLARIS RZR PRO R 4 SEAT TREE KICKERS
MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
COMES RAW OR ANY POLARIS OEM COLOR
HEAVY DUTY THROUGH-FRAME HARDWARE MADE BY L&W FAB
NO DRILLING REQUIRED
**2PC DESIGN
DESIGNED FOR 74” MACHINES
KICKS OUT 9”Hardware for complete set (1 driver and 1 passenger):
(6) plastic end caps for 1.75 x .120 tube
(16) SAE ½” flat washers
(8) ½” lock washers
(8) ½-13 THIN nylon insert locknut
(8) ½”-13 x 1” GR8 hex bolts
(8) 3/8-16 X 1” STAINLESS STEEL ALLEN HEAD BOLTS
(6) pro xp front frame PIN (L&W made)
(2) pro xp rear frame PIN (L&W made) -
TURBO R 2 SEAT CAGE
$1,300.00 – $1,700.00Select optionsTURBO R 2 SEAT CAGE
Fits 2022-current Polaris TURBO R 2 SEATER
Cages are made from 1.75” DOM.
7” chop measured at B Pillar (Driver head)–IMPORTANT CAGE INFORMATIONALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.Please allow 24 – 48hrs for an email response with your quote.-ALSO PLEASE NOTE ALL SALES ARE FINAL.-PICKUP INFORMATIONWhen placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.
Please indicate color of cage and roof, if you chose the powder coat option. (IF YOU CHOOSE A RAW CAGE, YOU MUST CHOOSE A RAW ROOF!)
We will not add options for lower windshield bar or intrusion bars.
-
RZR XP TURBO/ TURBO S- SIDE VENT COVERS
$80.00 – $205.00Select optionsPOLARIS RZR XP TURBO/ TURBO S- SIDE VENT COVERS
Made from 18ga steel
Comes with all necessary hardware. Drilling requiried
Add some bling to your XP Turbo while also protecting the frog skin
Can be bought as 2pc (outside only/Inside Only) or 4 pc(inside and outside)- Mesh will be black *
ONLY FIT ’17 and up models!
-
RZR XP- Long Travel Kit
$2,500.00 – $2,680.00Select optionsFITMENT:
2014–2023 RZR XP1000/XP TURBO.
Give your 64” RZR XP A wider, and more stable stance.
MADE OF DOMESTIC DOM (1.5X.120 WALL AND 1.25X.120 WALL)
Made from HRPO .250 sheet steel and 1.5×3–3/16 thick tubing
NO DRILLING REQUIREDTHIS KIT ONLY COMES WITH FORWARD A-ARMS
These take 17 and up model bushings.
If you have a 14-16 model, you will need to purchase bushings.
Only Steel Parts (A -Arms and Trailing Arms will come powder coated). Additional add on charge for powder coating radius rods is available.
Comes with everything needed except axles.
Requires Turbo S axles.
**NON TURBO MACHINES WILL NEED FRONT DIFF CHANGED TO ACCEPT A TURBO AXLE -
PRO R 2 SEAT CAGE
$1,200.00 – $1,700.00Select optionsPRO R 2 SEAT CAGE
FITMENT: 2022 up Polaris PRO R 2 seat all models
Made from 1.75 x .120 DOM
Comes standard with front grab handles
7” chop over head–IMPORTANT CAGE INFORMATIONALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.Please allow 24 – 48hrs for an email response with your quote.-ALSO PLEASE NOTE ALL SALES ARE FINAL.-PICKUP INFORMATIONWhen placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.
Please indicate color of cage and roof, if you chose the powder coat option. (IF YOU CHOOSE A RAW CAGE, YOU MUST CHOOSE A RAW ROOF!)
We will not add options for lower windshield bar or intrusion bars.
-
PRO R- REAR SWAY BAR LINKS
$140.00Add to cartPOLARIS RZR PRO R REAR SWAY BAR LINKS (ALL MODELS)
FITMENT:2022–CURRENT RZR PRO R ALL MODELS
Made from 6061 T6 billet aluminum
2x stronger than OEM
Adds to the look and strength of your machine
Comes as a pair (driver and passenger) along with all necessary spacers and hardware -
PRO R Trailing Arms
$1,500.00 – $1,600.00Select optionsPOLARIS PRO R HC Toe Delete TRAILING ARMS
Fitment: 2022- current Polaris Pro R.Features A TOE LINK DELETE. These will do away with the toe link and replace it with a short,
adjustable lockout bar made by L&W.Offers up to 5” of clearance over factory trailing arms.
Can still run factory offset wheels
Comes with new bolts for the new toe link delete.
Nothing else needed. Comes ready to bolt on!
Trailing arms are made Made from 3/16 and ¼” HRPO plate, and 1.75” x .250 wall tubing
Toe link delete bar made from 4140 steel and 304SS adjuster, utilizing a 3/4” heim.Green toe link piece in featured photos comes standard BLACK!
-
TURBO R Trailing Arms
$1,500.00 – $1,600.00Select optionsPOLARIS TURBO R HC Toe Delete TRAILING ARMS
Fitment: 2022- current Polaris Turbo R.Features A TOE LINK DELETE. These will do away with the toe link and replace it with a short,
adjustable lockout bar made by L&W.
Offers up to 5” of clearance over factory trailing arms.
Can still run factory offset wheels
Comes with New bolts for the new toe link delete
Nothing else needed. Comes ready to bolt on!
Trailing arms are made Made from 3/16 and ¼” HRPO plate, and 1.75” x .250 wall tubing
Toe link delete bar made from 4140 steel and 304SS adjuster, utilizing a 3/4” heim.Green toe link piece in featured photos comes standard BLACK!
-
Pro R/ Turbo R- Front Bumper
$325.00 – $375.00Select optionsFITMENT: 2022-CURRENT Pro R/Turbo R
Made from 11ga HRPO
Fits most winches up to 6k pounds
Factory bull bar and lower valance plastics are not used
Color options for bumper and overlays separate (mesh will always be black)
**must be used with L&W winch mount** -
2021 Ranger Forward A Arms with Adjustable Uppers
$600.00 – $650.00Select optionsThis set of Front A-Arms have adjustable uppers.
The adjustment is in the uppers only, the lowers are direct bolt.
These A-Arms are 1.75″ Forward. The adjustable pins have a 1 inch diameter.
These are only offered raw or powder coated black.
-
KRX Harness Bar
$175.00 – $205.00Select optionsKAWASAKI KRX 1000 SEATBELT HARNESS BAR
** THIS DOES NOT WORK WITH 4 SEATER KRX)**
A must have on the KRX to be able to run aftermarket harnesses.
Works on factory cage as well as our L&W cage
Bolts in using factory bolts
Does not work with click 6 harness.
Made from 3/16” plate and 1–3/4” DOM -
TURBO R 4 SEAT CAGE
$2,000.00 – $2,500.00Select optionsTURBO R 4 SEAT CAGE
Fits 2022-current Polaris TURBO R 4 SEATER/ 2 SEATER
Cages are made from 1.75” DOM.
7” chop measured at B Pillar (Driver head)–IMPORTANT CAGE INFORMATIONALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.Please allow 24 – 48hrs for an email response with your quote.-ALSO PLEASE NOTE ALL SALES ARE FINAL.-PICKUP INFORMATIONWhen placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.
Please indicate color of cage and roof, if you chose the powder coat option. (IF YOU CHOOSE A RAW CAGE, YOU MUST CHOOSE A RAW ROOF!)
We will not add options for lower windshield bar or intrusion bars.
-
1K/Turbo- Full Suspension Kit
$2,215.00 – $2,350.00Select optionsThis Kit fits the 1K/TURBO Models ONLY.
This full suspension kit includes:
Steel HD Trailing Arms. – https://landwfab.com/product/1k-turbo-rs1-steel-hd-trailing-arms/
Radius Rods- FULL KIT –https://landwfab.com/product/direct-bolt-radius-rods/
Tie Rods- The default tie rod for this kit is the factory style HD WARRANTIED ENDS. https://landwfab.com/product/factory-style-tie-rods/
Rear Sway Bar Links- https://landwfab.com/product/sway-bar-links/
A Arms- FULL KIT https://landwfab.com/product/1k-turbo-high-clearance-a-arms/
(PLEASE NOTE WHEN CHOOSING A POWDER COAT COLOR OPTION THAT ONLY THE STEEL PARTS (A-ARMS and TRAILING ARMS) WILL BE POWDER COATED THAT COLOR, THE OTHER ALUMINUM ITEMS (TIE RODS, RADIUS RODS and SWAY BARS) WOULD BE RAW BILLET ALUMINUM-unless upgraded to powder coat radius rods below.)
-
PRO XP- Full Suspension Kit
$2,300.00 – $2,450.00Select optionsThis kit is for PRO XP Models ONLY.
Please see “additional info” below for what all products this full suspension kit includes
(PLEASE NOTE WHEN CHOOSING A POWDER COAT COLOR OPTION THAT ONLY THE STEEL PARTS (A-ARMS and TRAILING ARMS) WILL BE POWDER COATED THAT COLOR, THE OTHER ALUMINUM ITEMS (TIE RODS, RADIUS RODS and SWAY BAR LINKS) WOULD COME RAW BILLET ALUMINUM- unless upgraded to powder coated radius rods below.)
-
Race Style A-Arms 1.75 FORWARD w/adjustable uppers)-TURBO S
$925.00 – $1,025.00Select optionsRace Style A-Arms (1.75 FORWARD w/adjustable uppers))- (Turbo S)
This is for the STANDARD BALL JOINT.
BUILT TO ORDER
These A Arms are 1 1/2 – .120 wall with extra bracing on the arms.
You can reuse your stock A-Arm bushings and Ball Joints.
This listing is for Turbo S models only.
