1K/TURBO- Radius Rod bushing kit
$27.50 – $55.00
This radius rod bushing kit will only work with L&W radius rods.
They will not work with the stock radius rods.
This listing is for either a FULL or HALF KIT.
This radius rod bushing kit will only work with L&W radius rods.
They will not work with the stock radius rods.
This listing is for either a FULL or HALF KIT.
FITMENT:
10mm is for year models 2014 to early 2017
12mm is for year models Late 2017-Current
If your year model falls in the mid 2017 range, you can determine your bolt size by the socket size. If the socket is 15mm, then you will need a 10mm bolt. If it is a 18mm, then you will need the 12mm bolt.
| Weight | 1 lbs |
|---|---|
| Style | 1 Heim, 2 Heim, Direct Bolt |
| Bolt Size | 10 mm, 12 mm |
| Location | Full Kit, Lower, Upper |
Related products
-
Polaris RZR RS1 Heavy Duty Axles – Rhino 2.0
$239.95Select optionsFitment
- Polaris RZR RS1 : 2018+
NOTE: Not compatible with Anti-Lock Brake Systems (ABS)
Features
- 100% stronger than stock
- Utilizes the Rhino 2.0 Formula
- Size: A massive 4mm increase in size!
- Materials
- Heat Treatment
- Constructed of 4340 chromoly steel and finished with a proprietary heat treatment
- Industry leading 18-month warranty
- Field and lab tested for extreme strength and endurance
- CAD drawn for expert precision
-
Clevis Style Tie Rods (1K/Turbo)
$290.00Select optionsThese are clevis style tie rods (heavy duty).
This listing is for a SET
Tie Rod ends are not consistent across all models or years. Please make sure to measure the rack end of stock tie rods to be sure of which size you need.
To determine what size you need, please measure the end of your tie rod that screws into the rack, if the measurement is less the 1/2″ you will need M14, if it is more then 1/2″ you will need M16.
These tie rods are made to work well for a racing style application.
6061 Aluminum.
Made in America
Life Warranty.
Ends are not warrantied, only the tie rod itself.
-
1K/TURBO- Race Style Winch Bumper (19-Current)
$300.00 – $350.00Select optionsThis listing is for 1K/TURBO models only.
(19-Current models)
This bumper comes with all mounting winch plates and hardware needed to install.
(DOES NOT INCLUDE FAIRLEAD)
Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)
Wide Spool Winches DO Fit In This Bumper
These bumpers use a 6 inch fairlead.
-
5/8 Heim
$15.00Select optionsThis Listing is for 5/8 Heims. (18 thread pitch)
These are replacement Heims only, they do not carry any warranty as they are considered a wear part.
We recommend keeping them greased with a non water based lubricant for a longer lasting use.
WE OFFER BOTH LEFT AND RIGHT HAND THREADS.
PLEASE READ FITMENT BELOW IF NEEDING TO KNOW WHICH THREAD TO PURCHASE FOR L&W PRODUCTS.