Products
Showing 41–80 of 203 results
-
Radius Rod Bushing Kit
$27.50 – $85.00Select optionsThese bushing kits will only work with L&W radius rods.
These will not work with the stock radius rods.
This kit does not include the uniball “bearings”, only the misalignment spacers.
This listing is for EITHER; UPPER KIT/ LOWER KIT OR FULL KIT.
-
RS1 Diff Plate
$225.00Add to cartMade of 11ga steel
Powder Coated Black
All hardware included
No wiring included. Wiring can be done by by splicing into the factory harness.
Instructions for cutting and Diff installation not included at this time, but can be found on Internet.
This version doesn’t allow use of winch mounting over the differential.
DOES NOT COME RED. Red is for Photo purposes ONLY.
-
2 Heim-1K/TURBO/RS1- Radius Rods
$240.00 – $465.00Select optionsTHIS LISTING IS FOR 1K/TURBO/RS1 MODELS ONLY.
This listing is for the 2 Heim Radius Rods.
The lowers are High clearance.
Includes all spacers needed for install.
PLEASE NOTE THAT IF YOU HAVE GEN3 SUPERATV PORTALS YOU WILL NEED TO PURCHASE THE UPPER ADJUSTABLE RADIUS RODS (1 HEIM or 2 HEIM) in order for your suspension to have enough room to travel without busting the portal bracket ear.
They are 6061 Aluminum, and made in the USA.
These Radius Rods hold a Lifetime Warranty.
Does not include radius plate, to purchase radius plate click here
FITMENT:
10mm is for year models 2014 to early 2017
12mm is for year models Late 2017-Current
If your year model falls in the mid 2017 range, you can determine your bolt size by the socket size. If the socket is 15mm, then you will need a 10mm bolt. If it is a 18mm, then you will need the 12mm bolt.
-
TURBO S- Race Style Winch Bumper
$300.00 – $350.00Select optionsThis listing is for Turbo S models only.
This bumper comes with all mounting winch plates and hardware needed to install.
(DOES NOT INCLUDE FAIRLEAD)
Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)
Wide Spool Winches DO Fit In This Bumper
These bumpers use a 6 inch fairlead.
-
Replacement Tie Rod Ends.
$18.00 – $135.00Select options(1000 / Turbo /Turbo S/ PRO XP / RS1 Models)
This is a replacement for our factory style tie rod ends.
Please see product photos for warranty information
To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. 2016 Turbo will always be M14/ PRO XP is M16
-
High Clearance Talon (X Model) A Arms
$300.00 – $690.00Select optionsThese A Arms are for the X edition only.
They are made from 1 1/4 inch tubing / 120 DOM
They take the factory ball joints
They do not use the factory bushings.
Each price includes the bushings you will need to run these A Arms
These are Non- Adjustable
They are factory offset
These A Arms will have up to 3.5 inches more clearance
Lifetime Warranty
Made in the USA
-
PRO XP FORWARD A Arms
$700.00 – $750.00Select options1.5 x .120 and 1.25 x .120 DOM
1.75″ Forward offset
Can clear 33-34″ tires
The stock steering stop may need to be cut back 1/2″ unless you are running portals.
L and W offers a life time warranty on bending and breaking the arm.
Please select raw in the color options if you do not want powder coating.
These A Arms do not require new bushings. You may use your factory bushings.
PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING
-
RS1 A-Arms
$400.00 – $840.00Select optionsThese High Clearance A Arms are raw material. 1 1/4 tubing.120 wall dom.
L and W offers a life time warranty on bending and breaking the arm.Please select raw in the color options if you do not want powder coating.
These A Arms do not require new bushings. You may use your factory bushings.
-
Full Windshields for L&W Cages
$260.00 – $385.00Select optionsThese windshields are made to fit L&W Production cages ONLY!
Windshields are made from 3/16 polycarbonate with MARGARD coating.
The maragard coating makes it scratch resistant. (Resistant not proof)
Comes complete with all hardware for easy installation
Made in the USA
-
Exhaust Cover for RZR Turbo/Turbo S
$100.00Select optionsSpecifications on Exhaust Cover for RZR:
It is made from 18 gauge steel.
No modifications are required to the machine
Works with factory and slip on exhausts
Does Not Work with Aftermarket Head Pipe
Fitment:
2018-Current XP Turbo
2018- Current Turbo S
Does not fit a 1000 model
For exhausts please click the link below:
https://landwfab.com/product-category/trinity-racing-products/mufflers/
-
PRO XP- 2 Seater Tree Kickers
$580.00 – $640.00Select optionsThis listing is for a set (driver and passenger) of 2 seater tree kickers.
2020-CURRENT POLARIS RZR PRO XP 2 SEAT (ALL MODELS) TREE KICKERS
DESIGNED FOR 64″ MACHINESMADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
COMES RAW OR ANY POLARIS OEM COLOR
HEAVY DUTY THROUGH-FRAME HARDWARE MADE BY L&W FAB
NO DRILLING REQUIRED.COMES STANDARD WITH BLACK PLASTIC END CAPS
American Made.
Installation Instructions: https://landwfab.com/wp-content/uploads/2021/11/pro-2-seat-instructions.pdf
-
Turbo S- Rear Bumper (18-Current)
$400.00 – $445.00Select optionsThis listing is for Turbo S models only.
This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install.
Made from 1.75 x .120 Wall Steel
CHECK OUT our Additional Bumper Add Ons and Upgrades Below!
-
Aluminum End Caps for Bumpers and Tree Kickers
$10.00 – $35.00Select optionsThese are aluminum replacement end caps for L&W bumpers and tree kickers.
These are aluminum replacement end caps for L&W bumpers and tree kickers.
Full Set = 4 piece
- MADE IN USA
- Perfect for Tubing ends
- Machined from 6061-T6 aluminum
FITMENT:
1.75 tubing diameter
.120 wall thickness
-
PRO XP- Standard A-Arms
$350.00 – $750.00Select optionsThese High Clearance A Arms are raw material. 1 1/4 tubing.120 wall dom.
L and W offers a life time warranty on bending and breaking the arm.Please select raw in the color options if you do not want powder coating.
These A Arms do not require new bushings. You may use your factory bushings.
PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING
-
Gordon Cage- 1K/Turbo/Turbo S- 4 Seater
$2,000.00Select optionsGordon Standard is a 6″ Chop
Gordon Low is a 8″ Chop
If you would like to purchase a windshield to fit this cage please click here!
- Price includes Aluminum Roof.
- Cage DOES NOT come standard with grab bars or intrusion bars. Those must be added for an additional charge.
- Please allow 1-3 business days for add ons and 10-15 business days for powder coating.
- Please indicate color of cage and roof, if you chose the powder coat option.
(See shipping details in Additional Info below!)
-
1 Heim-1K/TURBO/RS1- Radius Rods
$240.00 – $465.00Select optionsTHIS LISTING IS FOR 1K/TURBO/RS1 MODELS ONLY.
This listing is for the 1 Heim Radius Rods.
The lowers are High clearance.
Includes all spacers needed for install.
PLEASE NOTE THAT IF YOU HAVE GEN3 SUPERATV PORTALS YOU WILL NEED TO PURCHASE THE UPPER ADJUSTABLE RADIUS RODS (1 HEIM or 2 HEIM) in order for your suspension to have enough room to travel without busting the portal bracket ear.
They are 6061 Aluminum, and made in the USA.
These Radius Rods hold a Lifetime Warranty.
Does not include radius plate, to purchase radius plate click here
FITMENT:
10mm is for year models 2014 to early 2017
12mm is for year models Late 2017-Current
If your year model falls in the mid 2017 range, you can determine your bolt size by the socket size. If the socket is 15mm, then you will need a 10mm bolt. If it is a 18mm, then you will need the 12mm bolt.
-
Turbo S- Forward A Arms with Adjustable Uppers
$825.00 – $925.00Select optionsNEW PRODUCT PHOTO COMING SOON!
This set of A Arms has adjustable uppers.
The adjustment is in the uppers only, the lowers are direct bolt.
The A Arms are 1.75″ Forward. The adjustable pins have a 1 inch diameter.
You can reuse your stock bushings and stock ball joints.
-
Aftermarket Snap In Grill with Light Bar
$185.00Select optionsComes with Light Bar (does not include wiring harness)
Options for outline color and L&W logo
The grill mesh will always be black
Fitment:
Turbo S
19-current models 1K/Turbo
*NOTE: THIS GRILL WILL NOT WORK WITH THE FACTORY POLARIS BUMPER WITHOUT MAKING SLIGHT MODIFICATIONS TO FIT.*
-
(MEGA) 1.75″ Forward High Clearance A Arms- 1K/TURBO
$635.00 – $725.00Select optionsTHIS LISTING IS FOR A FULL KIT.
L and W offers a life time warranty on bending and breaking the A arms.
These A Arms are constructed for Mega Ball Joints ONLY.
Will NOT work with 6+1 or 5+2 Offset Wheels.
Please select raw in the color options if you do not want powder coating.
Our A Arms now require 17+ model bushings.
If you have a 14-16 you will need to purchase the bushing kit for the 17+ model.
Bushing Sold Separately. Please see link in description for bushings.
PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING
-
PRO XP- Sport Bumper
$300.00 – $350.00Select optionsThis listing is for PRO XP models only.
(NON R MODEL)
FITMENT: 19-Current PRO XPThis front bumper comes with all hardware needed to install.
Made of 1.75” x .120” DOM , 11GA and 3/16” plate
Bumper works in CONJUNTION with aftermarket winch mounts.This bumper is not a winch mount- Only a Fairlead mount
Works with most popular aftermarket winch mounts including KFI, SUPERATV, and L&W.
Integrated holes in corners for 3⁄4” blinkersThese bumpers use a 6 inch fairlead.
(fairlead is not included UNLESS purchased as an add on below)
-
PRO XP- 4 Seater Tree Kickers
$700.00 – $775.00Select optionsThis listing is for a set (driver and passenger) of 4 seater tree kickers.
2020-CURRENT POLARIS RZR PRO XP 4 SEAT (ALL MODELS) TREE KICKERS
MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
COMES RAW OR ANY POLARIS OEM COLOR
HEAVY DUTY THROUGH-FRAME HARDWARE MADE BY L&W FABDESIGNED FOR 64″ MACHINES
NO DRILLING REQUIRED.
American Made.
Install Instructions: PowerPoint Presentation (landwfab.com)
-
Seat lowering Base Hardware Kit
$15.00 – $30.00Select optionsThis Listing is for a SET for TWO seat lowering base hardware kits or for a SINGLE seat base.
This is not required with the purchase of a new set of bases.
This is only a replacement kit.
This hardware kit is a replacement for RZR as well as General seat lowering bases.
-
Light Bar Mounting Tabs
$55.00Add to cartThese mounting tabs can be used to mount a 30-34 inch light bar or single pods.
They are powder coated black.
They do not come with hardware. You will use the hardware from your cage to mount them.
The tabs mount to the bottom bung of your aftermarket or stock cage.
-
1K/Turbo/Turbo S- 2 Seater Cage
$1,150.00 – $1,350.00Select optionsCages are made out of .120 DOM – 1.75″ in diameter.
–IMPORTANT CAGE INFORMATIONALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.Please allow 24 – 48hrs for an email response with your quote.-ALSO PLEASE NOTE ALL SALES ARE FINAL.-PICKUP INFORMATIONWhen placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.Cage Includes aluminum roof
Cage DOES NOT come standard with grab bars. Those must be added for an additional charge.
Please indicate color of cage and roof, if you chose the powder coat option.
-
2 Seater Pro XP Cage
$1,150.00Select options–IMPORTANT CAGE INFORMATIONALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.Please allow 24 – 48hrs for an email response with your quote.-ALSO PLEASE NOTE ALL SALES ARE FINAL.-PICKUP INFORMATIONWhen placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH GRAB HANDLES.
Please indicate color of cage and roof, if you chose the powder coat option.
