Products
Showing 81–120 of 196 results
-
1K/Turbo/RS1- Steel HD Trailing Arms
$825.00 – $875.00Select optionsFITMENT: 1K/TURBO/RS1
These Steel HD Trailing Arms are built from 1″ 1/2 x 3 3/16 Rectangle Tubing.
You may choose the color of the Trailing arm itself, however the brake line logo bracket comes powder coated black.
These trailing arms hold a lifetime warranty.
They are not under warranty for racing applications, and there is no warranty on wear parts. (Uniball/Misalignments).
-
1K/Turbo-Rear Bumper (14-18 Model)
$350.00 – $400.00Select optionsThis Listing is for 1k/turbo 14-18 Model only!
It WILL NOT fit a 2019-up model rzr.This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. Made from 1.75 x .120 Wall Steel
CHECK OUT our Additional Bumper Add Ons and Upgrades Below!
-
PRP 4.2 Harness
$110.99Select optionsL & W now carries PRP 4.2 UTV harnesses. This sleek 4 point harness will provide superior safety for your UTV, all while remaining comfortable for hours and miles of riding! The EZ adjuster feature allows for a quick and easy adjustment in even the muddiest conditions. This harness is available in a variety of colors: Red, Blue, Black, Silver, and Orange! Make an uncomfortable UTV harness a thing of the past in your riding experience.
-
900S /1000S Tie Rods
$189.00 – $240.00Select optionsThis listing is for 900 S / 1000 S Tie Rods
These are for the S models ONLY
They are made out of 6061 Aluminum.
They have a billet finish.
Made in America.
Lifetime Warranty on the rods.
Factory ends are not warrantied, only the tie rod itself.
Specs for HD Rebuild-able Tie Rod Ends:
Fully rebuild-able
Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished
100 percent made in USA
This product holds an 18 month warranty
-
Receiver Hitch Plate for Factory Replacement
$145.00Select optionsThis receiver hitch plate is for anyone that isn’t planning on running a bumper, or is running bumper that requires the use of a factory shaped radius rod plate.
It is just a direct replacement of the factory radius rod plate with an added receiver hitch.
This only comes in black.
Material Specs:
1/4″ thick HRPO steel.
Receiver protrusion for all variations is 5-15/16″
All variations accepts standard 2″ receiver with 5/8″ pin
-
Honda Talon Tie Rods (R Edition)
$210.00Add to cartHonda Talon Tie Rods (R EDITION ONLY) This listing is for a SET Tie Rods are made from 6061 Aluminum and have a billet finish These Tie Rods use the factory inners and outers piece. This listing is for the rods only! Made in the USA Lifetime Warranty
-
Turbo S- Steel High Clearance HD Trailing Arms
$875.00 – $925.00Select optionsFITMENT: 2018-CURRENT TURBO S MODELS ONLY!
Made from 1-1/2” x 3” Rectangle tubing 3/16” Wall, ¼” plate, 3/16” plate, and 11 gauge Plate.
Provides up to 5” of much needed clearance over factory Turbo S trailing arm
Provides protection for axle boots
Utilizes all factory mounting points, as well as holes to mount brake lines
You may choose the color of the Trailing arm itself, however the brake line logo bracket comes powder coated black.
These trailing arms hold a lifetime warranty.
There is no warranty on wear parts. (Uniball/Misaliments).
-
1K/TURBO- Receiver Hitch Plate for L&W Bumper
$145.00Select optionsThis is a replacement for the steel or billet radius plates that are used in correspondence with an L&W Bumper.
They come in black only.
Material Specs:
1/4″ thick HRPO steel.
Receiver protrusion for all variations is 5-15/16″
All variations accepts standard 2″ receiver with 5/8″ pin
-
Aluminum End Caps for Bumpers and Tree Kickers
$10.00 – $35.00Select optionsThese are aluminum replacement end caps for L&W bumpers and tree kickers.
These are aluminum replacement end caps for L&W bumpers and tree kickers.
- MADE IN USA
- Perfect for Tubing ends
- Machined from 6061-T6 aluminum
FITMENT:
1.75 tubing diameter
.120 wall thickness
-
4 Seater Pro XP Cage
$2,000.00Read moreThese cages are shipped LTL and carry an additional shipping charge. (By purchasing this listing, you are agreeing to pay any and all shipping charges which are additional and are not included in the price on this listing. Shipping can range anywhere from $600-$1500 per cage. Up to date charges for specific destination will be charged. You will be contacted within 24 hours of purchase to arrange shipping quote and payment.)
Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.
Currently we are only shipping cages RAW. Powder Coated options are pick up only.
Please allow 1-3 business days for add ons and 7-10 business days for powder coating.
Please indicate color of cage and roof, if you chose the powder coat option.
-
Offroad Rugged X-Grip Phone / Tablet Mount for Roll Cage
$65.33 – $125.85Select options- American made
- Comes with Ram Mounts X-Grip
- Each clamp is 1/2″ thick
- These will fit 1.75″ tubing
- Great way to mount your phone to any tubing
- Made from 6061-T6 Billet Aluminum
Large Ram mount phone holder will except a phone width from 1.75″ to 4.50″
Small Ram mount tablet holder will except a tablet width from 2.50″ to 5.75″
Large Ram mount tablet holder will except a tablet width from 6.25″ to 8.10″ and 10.25″ long
-
Race Style REAR Bumper (2019-Current)
$325.00 – $375.00Select optionsThis listing is for 1K/TURBO models only.
This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install.
Made from 1.75 x .120 Wall Steel
CHECK OUT our Additional Bumper Add Ons and Upgrades Below!
-
Polaris RZR XP 1000 Heavy Duty Axles – Rhino 2.0
$239.95Select optionsFitment
- Polaris RZR XP 1000 : 2014+
- Polaris RZR XP 4 1000 : 2014+
- Polaris RZR XP 1000 High Lifter Edition : 2016+
- Polaris RZR XP 1000 Trails & Rocks Edition (AZ) : 2017+
NOTE: Not compatible with Anti-Lock Brake Systems (ABS)
Features
- 100% stronger than stock
- Utilizes the Rhino 2.0 Formula
- Size: Massive 4mm increase in size!
- Materials
- Heat Treatment
- Constructed of 4340 chromoly steel and finished with a proprietary heat treatment
- Industry leading 18-month warranty
- Field and lab tested for extreme strength and endurance
- CAD drawn for expert precision
-
1 Heim-1K/TURBO/RS1- Radius Rods
$240.00 – $465.00Select optionsTHIS LISTING IS FOR 1K/TURBO/RS1 MODELS ONLY.
This listing is for the 1 Heim Radius Rods.
The lowers are High clearance.
Includes all spacers needed for install.
PLEASE NOTE THAT IF YOU HAVE GEN3 SUPERATV PORTALS YOU WILL NEED TO PURCHASE THE UPPER ADJUSTABLE RADIUS RODS (1 HEIM or 2 HEIM) in order for your suspension to have enough room to travel without busting the portal bracket ear.
They are 6061 Aluminum, and made in the USA.
These Radius Rods hold a Lifetime Warranty.
Does not include radius plate, to purchase radius plate click here
FITMENT:
10mm is for year models 2014 to early 2017
12mm is for year models Late 2017-Current
If your year model falls in the mid 2017 range, you can determine your bolt size by the socket size. If the socket is 15mm, then you will need a 10mm bolt. If it is a 18mm, then you will need the 12mm bolt.
-
Adjustable Can-Am Radius Rods- 72″
$725.00 – $852.00Select optionsThese Can Am X3 Radius Rods are for the 72″ models ONLY- compatible with 17-current model Can-Ams.
Radius rods are made from 6061 T6 Billet Aluminum.
These radius rods come with all hardware needed for install and are also backed by a lifetime warranty!
-
PRO XP- Steel HD Trailing Arms
$825.00 – $875.00Select optionsFITMENT: 2020-CURRENT PRO XP
These Steel HD Trailing Arms are built from 1″ 1/2 x 3 3/16 Rectangle Tubing.
You may choose the color of the Trailing arm itself, however the brake line logo bracket comes powder coated black.
These trailing arms hold a lifetime warranty.
They are not under warranty for racing applications, and there is no warranty on wear parts. (Uniball/Misalignments).
-
Polaris RZR XP Turbo Heavy Duty Axles – Rhino 2.0
$239.95Select optionsFITMENT
-
- RZR XP Turbo : 2016+
- RZR XP 4 Turbo : 2016+
Will NOT Fit 2018+ RZR Turbo SNote: May require some minor grinding for proper fitment, see instructions.
FEATURES
- 100% stronger than stock
- Utilizes the Rhino 2.0 Formula
- Size: A massive 4mm increase in size!
- Materials
- Heat Treatment
- Constructed of 4340 chromoly steel and finished with a proprietary heat treatment
- Industry leading 18 month warranty
- Field and lab tested for extreme strength and endurance
- CAD drawn for expert precision
-
-
PRO XP Long Travel Kit
$2,750.00 – $3,750.00Select optionsFits 2020-current Polaris PRO XP
Bolt on installation.
No drilling required
This kit adds 4” to each side of a PRO XP giving it a 72” width with stock offset wheels.
Adds 3.5” to the wheelbase.
Front a arms are 1.75” forward offset, and rear trailing arms are 1.75” rear offset, which improves stability.
A arms are made from 1.5” DOM. and are high clearance.
Front and Rear keep factory shock location.
Can use factory PRO XP bushings and factory ball joints.
Only Steel Parts ( A Arms and Trailing Arms will come powder coated ). Additional add on charge for powder coating radius rods is available.
Kit includes:
- Front upper and lower A arms. (Non- Adjustable)( Stock size ball joints only. These are not offered for Mega Ball Joints)
- Set of Tie Rods with L&W HD rebuild-able inner joints.
- High Clearance Steel HD Trailing Arms
- High Clearance Billet Aluminum Radius Rods with adjustable uppers.
- (1) Extended brake line for front passenger side
REQUIRES THE USE OF TURBO S AXLES and RZR XP/TURBO S HUBS that are not included
HUB OEM PART # 5141353-067
WE RECOMMEND A SPRING UPGRADE, AS THIS KIT WILL GREATLY INCREASE THE SOFTNESS OF
THE SPRINGS. (SPRINGS WILL COME POWDER COATED BLACK- ZBROZ)
****If Purchasing Ball Joints or A Arm Bushings, they WILL NOT come installed****
-
General A Arms (Front) 2″ Forward (with adjusting lowers)
$750.00Add to cartThe A Arms are for the Polaris General, they will not fit the XP models.
They do not have sway bar tabs .
1000 Models only. 16-21 models.
They are the Front A Arms only.
As of right now, they only come powder coated matte black.
-
PRO XP FORWARD A Arms (MEGA BALL JOINT)
$700.00 – $750.00Select optionsPRO XP FORWARD A Arms (MEGA BALL JOINT)
1.5 x .120 and 1.25 x .120 DOM
1.75″ Forward offset
Can clear 33-34″ tires
L and W offers a life time warranty on bending and breaking the arm.
Please select raw in the color options if you do not want powder coating.
These A Arms do not require new bushings. You may use your factory bushings.
PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING
For Standard Ball Joint A Arms: https://landwfab.com/product/pro-xp-forward-a-arms/
-
Honda Talon Tie Rods (X Edition)
$210.00Add to cartHonda Talon Tie Rods (X EDITION ONLY) This listing is for a SET Tie Rods are made from 6061 Aluminum and have a billet finish These Tie Rods use the factory inners and outers piece. This listing is for the rods only! Made in the USA Lifetime Warranty
-
PRO XP- 1 Heim Radius Rods
$240.00 – $465.00Select optionsTHIS LISTING IS FOR PRO XP MODELS ONLY.
The lowers are High clearance and always come Direct Bolt.
The 1 Heim Uppers come with a Right hand heim on one end of each rod for adjustability if needed.
*Adjustable uppers are usually necessary to correct any camber issues that you may have or experience on your machine. Most times if you plan to change tender springs, or if you are running a bigger set up (portals, lifts, changing ride height most times will cause +/- camber that you will need to correct with adjustable uppers.)
Includes all misalignment spacers needed for install.
They are 6061 Aluminum, and made in the USA.
These Radius Rods hold a Lifetime Warranty.
-
General Tie Rods
$189.00 – $240.00Select optionsThis listing is for General Tie Rods
THESE DO NOT FIT THE XP MODEL.
They are made out of 6061 Aluminum.
They have a billet finish.
Made in America.
Lifetime Warranty on the rods.
Factory ends are not warrantied, only the tie rod itself.
Specs for HD Rebuild-able Tie Rod Ends:
Fully rebuild-able
Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished
100 percent made in USA
This product holds an 18 month warranty
-
2021 Ranger Forward A Arms with Adjustable Uppers
$600.00 – $650.00Select optionsThis set of Front A-Arms have adjustable uppers.
The adjustment is in the uppers only, the lowers are direct bolt.
These A-Arms are 1.75″ Forward. The adjustable pins have a 1 inch diameter.
These are only offered raw or powder coated black.
-
PRO XP- Direct Bolt Radius Rods
$240.00 – $465.00Select optionsTHIS LISTING IS FOR PRO XP MODELS ONLY.
The lowers are High clearance and always come Direct Bolt.
The Direct Bolt Uppers come with no adjustment as they are direct fit.
*Adjustable uppers are usually necessary to correct any camber issues that you may have or experience on your machine. Most times if you plan to change tender springs, or if you are running a bigger set up (portals, lifts, changing ride height most times will cause +/- camber that you will need to correct with adjustable uppers.)
Includes all misalignment spacers needed for install.
They are 6061 Aluminum, and made in the USA.
These Radius Rods hold a Lifetime Warranty.
