Products
Showing 81–120 of 225 results
-
PRO XP Long Travel Kit
$2,750.00 – $3,750.00Select optionsFits 2020-current Polaris PRO XP
Bolt on installation.
No drilling required
This kit adds 4” to each side of a PRO XP giving it a 72” width with stock offset wheels.
Adds 3.5” to the wheelbase.
Front a arms are 1.75” forward offset, and rear trailing arms are 1.75” rear offset, which improves stability.
A arms are made from 1.5” DOM. and are high clearance.
Front and Rear keep factory shock location.
Can use factory PRO XP bushings and factory ball joints.
Only Steel Parts ( A Arms and Trailing Arms will come powder coated ). Additional add on charge for powder coating radius rods is available.
Kit includes:
- Front upper and lower A arms. (Non- Adjustable)( Stock size ball joints only. These are not offered for Mega Ball Joints)
- Set of Tie Rods with L&W HD rebuild-able inner joints.
- High Clearance Steel HD Trailing Arms
- High Clearance Billet Aluminum Radius Rods with adjustable uppers.
- (1) Extended brake line for front passenger side
REQUIRES THE USE OF TURBO S AXLES and RZR XP/TURBO S HUBS that are not included
HUB OEM PART # 5141353-067
WE RECOMMEND A SPRING UPGRADE, AS THIS KIT WILL GREATLY INCREASE THE SOFTNESS OF
THE SPRINGS. (SPRINGS WILL COME POWDER COATED BLACK- ZBROZ)
****If Purchasing Ball Joints or A Arm Bushings, they WILL NOT come installed****
-
Honda Talon -Radius Rod bushing kit
$27.50 – $55.00Select optionsThese bushing kits will only work with L&W radius rods.
These will not work with the stock radius rods.
This listing is for EITHER; UPPER KIT/ LOWER KIT OR FULL KIT.
In order for us to send you the correct parts we will need to know which sizes you need. With the Honda Talon you will have to measure the inside diameter of your spiracle bearings so that you get the correct replacements. If you are unable to measure, you can send a photo of the misalignment spacers you currently have and email them over to Taylor@landwfab.com so that she can try to help you determine what size to choose. Please note it is not guaranteed that she will be able to tell you what size to order if she is unable to determine it by the photos provided to her.
It should be either of these
12mm and ¾
15mm and ¾
Or All 15mm
-
Adjustable Can-Am Radius Rods- 72″
$725.00 – $852.00Select optionsThese Can Am X3 Radius Rods are for the 72″ models ONLY- compatible with 17-current model Can-Ams.
Radius rods are made from 6061 T6 Billet Aluminum.
These radius rods come with all hardware needed for install and are also backed by a lifetime warranty!
-
1K/Turbo/Turbo S- 2 Seater Cage
$1,300.00 – $1,850.00Select optionsCages are made out of .120 DOM – 1.75″ in diameter.
–IMPORTANT CAGE INFORMATIONALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.Please allow 24 – 48hrs for an email response with your quote.-ALSO PLEASE NOTE ALL SALES ARE FINAL.-PICKUP INFORMATIONWhen placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.Cage Includes aluminum roof
Cage DOES NOT come standard with grab bars. Those must be added for an additional charge.
Please indicate color of cage and roof, if you chose the powder coat option.
-
Light Bar Mounting Tabs
$55.00Add to cartThese mounting tabs can be used to mount a 30-34 inch light bar or single pods.
They are powder coated black.
They do not come with hardware. You will use the hardware from your cage to mount them.
The tabs mount to the bottom bung of your aftermarket or stock cage.
-
Turbo S- Steel High Clearance HD Trailing Arms
$875.00 – $925.00Select optionsFITMENT: 2018-CURRENT TURBO S MODELS ONLY!
Made from 1-1/2” x 3” Rectangle tubing 3/16” Wall, ¼” plate, 3/16” plate, and 11 gauge Plate.
Provides up to 5” of much needed clearance over factory Turbo S trailing arm
Provides protection for axle boots
Utilizes all factory mounting points, as well as holes to mount brake lines
You may choose the color of the Trailing arm itself, however the brake line logo bracket comes powder coated black.
These trailing arms hold a lifetime warranty.
There is no warranty on wear parts. (Uniball/Misaliments).
-
Ranger 1000 Tie Rods
$189.00 – $295.00Select optionsThis listing is for Ranger 1000 Tie Rods
These will only fit a Ranger 1000
Factory ends are not warrantied, only the tie rod itself.
To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. ( measuring is recommended )
They are made out of 6061 Aluminum.
They have a billet finish.
-
1K/Turbo/RS1- Steel HD Trailing Arms
$825.00 – $875.00Select optionsFITMENT: 1K/TURBO/RS1
These Steel HD Trailing Arms are built from 1″ 1/2 x 3 3/16 Rectangle Tubing.
You may choose the color of the Trailing arm itself, however the brake line logo bracket comes powder coated black.
These trailing arms hold a lifetime warranty.
They are not under warranty for racing applications, and there is no warranty on wear parts. (Uniball/Misalignments).
-
Turbo R – 2 Seater Tree Kickers
$585.00 – $645.00Select options2022–CURRENT POLARIS RZR TURBO R 2 SEAT (ALL MODELS) TREE
KICKERS
FITMENT:
Fits All trims of The Turbo R, and also works well with Pro XP long travel- MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
- PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
- COMES RAW OR ANY POLARIS OEM COLOR
- HEAVY DUTY THROUGH–FRAME HARDWARE MADE BY L&W FAB
- NO DRILLING REQUIRED
- DESIGNED FOR 72–74” MACHINES
Hardware for complete set (1 driver and 1 passenger):
(6) plastic end caps for 1.75 x .120 tube
(12) SAE ½” flat washers
(6) ½” lock washers
(6) ½–13 THIN nylon insert locknut
(6) ½”–13 x 1” GR8 hex bolts
(4) pro xp front frame PIN (L&W made)
(2) pro xp rear frame PIN (L&W made)
American Made.
-
4 Seater Pro XP Cage
$2,000.00 – $2,500.00Select options–IMPORTANT CAGE INFORMATIONALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.Please allow 24 – 48hrs for an email response with your quote.-ALSO PLEASE NOTE ALL SALES ARE FINAL.-PICKUP INFORMATIONWhen placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.
Please indicate color of cage and roof, if you chose the powder coat option.
-
PRO XP – RADIUS ROD PLATE
$165.00 – $185.00Select optionsFitment: 2020–current Polaris Pro XP
Made from 6061–T6 Billet aluminum
Adds strength as well as looks
Comes with pull pointPLEASE NOTE: If powder coat option is chosen only the plate itself will be powdered, the pull point will always be billet aluminum.
-
PRO R -2 SEAT TREE KICKERS
$670.00 – $735.00Select options2022–CURRENT POLARIS RZR PRO R 2 SEAT (ALL MODELS) TREE KICKERS
FITMENT:
Fits All trims of The RZR PRO R.
MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
COMES RAW OR ANY POLARIS OEM COLOR
HEAVY DUTY THROUGH–FRAME HARDWARE MADE BY L&W FAB
NO DRILLING REQUIRED
Hardware for complete set (1 driver and 1 passenger):
(6) plastic end caps for 1.75 x .120 tube
(12) SAE ½” flat washers
(6) ½” lock washers
(6) ½–13 THIN nylon insert locknut
(6) ½”–13 x 1” GR8 hex bolts
(4) pro xp front frame PIN (L&W made)
(2) pro xp rear frame PIN (L&W made) -
900S /1000S Tie Rods
$189.00 – $295.00Select optionsThis listing is for 900 S / 1000 S Tie Rods
These are for the S models ONLY
They are made out of 6061 Aluminum.
They have a billet finish.
Made in America.
Lifetime Warranty on the rods.
Factory ends are not warrantied, only the tie rod itself.
Specs for HD Rebuild-able Tie Rod Ends:
Fully rebuild-able
Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished
100 percent made in USA
This product holds an 18 month warranty
-
PRO Grill WITHOUT Lightbar
$165.00Select optionsPRO XP/R GRILL
FITMENT: All Pro XP models and Pro R/ Turbo R models
Easily snaps in and out.
Not screwed to the machine.
Must drill 4 holes to install snap tab.
Side Vent color will be the same color you choose for the grill overlay color.
Side Vents DO NOT WORK WITH PRO XP MODELS
TO PURCHASE JUST THE SIDE VENTS PLEASE CLICK THE LINK BELOW:
https://landwfab.com/product/pro-r-turbo-r-side-vents/
-
Honda Talon Tie Rods (R Edition)
$210.00Add to cartHonda Talon Tie Rods (R EDITION ONLY) This listing is for a SET Tie Rods are made from 6061 Aluminum and have a billet finish These Tie Rods use the factory inners and outers piece. This listing is for the rods only! Made in the USA Lifetime Warranty
-
PRO XP- Steel HD Trailing Arms
$825.00 – $875.00Select optionsFITMENT: 2020-CURRENT PRO XP
These Steel HD Trailing Arms are built from 1″ 1/2 x 3 3/16 Rectangle Tubing.
You may choose the color of the Trailing arm itself, however the brake line logo bracket comes powder coated black.
These trailing arms hold a lifetime warranty.
They are not under warranty for racing applications, and there is no warranty on wear parts. (Uniball/Misalignments).
-
PRO R 4 Seater Tree Kickers
$1,050.00 – $1,150.00Select options2022-CURRENT POLARIS RZR PRO R 4 SEAT TREE KICKERS
MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
COMES RAW OR ANY POLARIS OEM COLOR
HEAVY DUTY THROUGH-FRAME HARDWARE MADE BY L&W FAB
NO DRILLING REQUIRED
**2PC DESIGN
DESIGNED FOR 74” MACHINES
KICKS OUT 9”Hardware for complete set (1 driver and 1 passenger):
(6) plastic end caps for 1.75 x .120 tube
(16) SAE ½” flat washers
(8) ½” lock washers
(8) ½-13 THIN nylon insert locknut
(8) ½”-13 x 1” GR8 hex bolts
(8) 3/8-16 X 1” STAINLESS STEEL ALLEN HEAD BOLTS
(6) pro xp front frame PIN (L&W made)
(2) pro xp rear frame PIN (L&W made) -
Receiver Hitch Plate for Factory Replacement
$145.00Select optionsThis receiver hitch plate is for anyone that isn’t planning on running a bumper, or is running bumper that requires the use of a factory shaped radius rod plate.
It is just a direct replacement of the factory radius rod plate with an added receiver hitch.
This only comes in black.
Material Specs:
1/4″ thick HRPO steel.
Receiver protrusion for all variations is 5-15/16″
All variations accepts standard 2″ receiver with 5/8″ pin
-
1K/Turbo-Rear Bumper (14-18 Model)
$350.00 – $400.00Select optionsThis Listing is for 1k/turbo 14-18 Model only!
It WILL NOT fit a 2019-up model rzr.This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. Made from 1.75 x .120 Wall Steel
CHECK OUT our Additional Bumper Add Ons and Upgrades Below!
-
PRP 4.2 Harness
$110.99Select optionsL & W now carries PRP 4.2 UTV harnesses. This sleek 4 point harness will provide superior safety for your UTV, all while remaining comfortable for hours and miles of riding! The EZ adjuster feature allows for a quick and easy adjustment in even the muddiest conditions. This harness is available in a variety of colors: Red, Blue, Black, Silver, and Orange! Make an uncomfortable UTV harness a thing of the past in your riding experience.
-
1K/TURBO- Receiver Hitch Plate for L&W Bumper
$145.00Select optionsThis is a replacement for the steel or billet radius plates that are used in correspondence with an L&W Bumper.
They come in black only.
Material Specs:
1/4″ thick HRPO steel.
Receiver protrusion for all variations is 5-15/16″
All variations accepts standard 2″ receiver with 5/8″ pin
-
Offroad Rugged X-Grip Phone / Tablet Mount for Roll Cage
$65.33 – $125.85Select options- American made
- Comes with Ram Mounts X-Grip
- Each clamp is 1/2″ thick
- These will fit 1.75″ tubing
- Great way to mount your phone to any tubing
- Made from 6061-T6 Billet Aluminum
Large Ram mount phone holder will except a phone width from 1.75″ to 4.50″
Small Ram mount tablet holder will except a tablet width from 2.50″ to 5.75″
Large Ram mount tablet holder will except a tablet width from 6.25″ to 8.10″ and 10.25″ long
-
TURBO R 2 SEAT CAGE
$1,300.00 – $1,700.00Select optionsTURBO R 2 SEAT CAGE
Fits 2022-current Polaris TURBO R 2 SEATER
Cages are made from 1.75” DOM.
7” chop measured at B Pillar (Driver head)–IMPORTANT CAGE INFORMATIONALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.Please allow 24 – 48hrs for an email response with your quote.-ALSO PLEASE NOTE ALL SALES ARE FINAL.-PICKUP INFORMATIONWhen placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.
Please indicate color of cage and roof, if you chose the powder coat option. (IF YOU CHOOSE A RAW CAGE, YOU MUST CHOOSE A RAW ROOF!)
We will not add options for lower windshield bar or intrusion bars.
-
Race Style REAR Bumper (2019-2023)
$325.00 – $375.00Select optionsThis listing is for 1K/TURBO models only.
This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install.
Made from 1.75 x .120 Wall Steel
CHECK OUT our Additional Bumper Add Ons and Upgrades Below!
-
RZR XP TURBO/ TURBO S- SIDE VENT COVERS
$80.00 – $205.00Select optionsPOLARIS RZR XP TURBO/ TURBO S- SIDE VENT COVERS
Made from 18ga steel
Comes with all necessary hardware. Drilling requiried
Add some bling to your XP Turbo while also protecting the frog skin
Can be bought as 2pc (outside only/Inside Only) or 4 pc(inside and outside)- Mesh will be black *
ONLY FIT ’17 and up models!
-
Polaris RZR XP 1000 Heavy Duty Axles – Rhino 2.0
$239.95Select optionsFitment
- Polaris RZR XP 1000 : 2014+
- Polaris RZR XP 4 1000 : 2014+
- Polaris RZR XP 1000 High Lifter Edition : 2016+
- Polaris RZR XP 1000 Trails & Rocks Edition (AZ) : 2017+
NOTE: Not compatible with Anti-Lock Brake Systems (ABS)
Features
- 100% stronger than stock
- Utilizes the Rhino 2.0 Formula
- Size: Massive 4mm increase in size!
- Materials
- Heat Treatment
- Constructed of 4340 chromoly steel and finished with a proprietary heat treatment
- Industry leading 18-month warranty
- Field and lab tested for extreme strength and endurance
- CAD drawn for expert precision