Products

Showing 81–120 of 216 results

  • PRO XP /PRO R/ TURBO R- Packout Mount

    $145.00

    -Made from 10GA Steel
    -Comes powder coated black
    -(2) holes must be drilled to install
    -An angled design allows more room for cooler
    -When used in the PRO R models, many popular coolers will fit and still open. (Ozark Trail 26qt
    works best

     

    Add to cart
  • PRO XP FRAME CROSS MEMBER

    $135.00$260.00

    Made from 3/16 STEEL
    The factory prop shaft crossmember is known to bend. When the crossmember bends, it
    changes the prop shaft angle, and can lead to premature bearing failure and vibrations.

    Our crossmembers are 2.5x thicker and add strength where it is needed.
    Works with factory or aftermarket bearing carriers.
    Bolts in using factory hardware

    FITMENT:

    2020-CURRENT PRO XP 4 SEAT

    2020-CURRENT PRO XP 2 SEAT

    2020-CURRENT PRO XP 4 SEAT REAR

    Select options
  • Adjustable Can-Am Radius Rods- 72″

    $725.00$852.00

    These Can Am X3 Radius Rods are for the 72″ models ONLY- compatible with 17-current model Can-Ams.

    Radius rods are made from 6061 T6 Billet Aluminum.

    These radius rods come with all hardware needed for install and are also backed by a lifetime warranty!

    Select options
  • Honda Talon -Radius Rod bushing kit

    $27.50$55.00

    These bushing kits will only work with L&W radius rods.

    These will not work with the stock radius rods.

    This listing is for EITHER; UPPER KIT/ LOWER KIT OR FULL KIT.

    In order for us to send you the correct parts we will need to know which sizes you need. With the Honda Talon you will have to measure the inside diameter of your spiracle bearings so that you get the correct replacements. If you are unable to measure, you can send a photo of the misalignment spacers you currently have and email them over to Taylor@landwfab.com so that she can try to help you determine what size to choose. Please note it is not guaranteed that she will be able to tell you what size to order if she is unable to determine it by the photos provided to her.

    It should be either of these

    12mm and ¾

    15mm and ¾

    Or All 15mm

    Select options
  • End Caps for Bumpers/Tree Kickers

    $12.00$20.00

    These are plastic replacement end caps for L&W bumpers and tree kickers. 

    Select options
  • 1K/Turbo/Turbo S- 2 Seater Cage

    $1,300.00$1,850.00

    Cages are made out of .120 DOM – 1.75″ in diameter.

    IMPORTANT CAGE INFORMATION
    ALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.
     
    -IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.
    Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.
    Please allow 24 – 48hrs for an email response with your quote.
    -ALSO PLEASE NOTE ALL SALES ARE FINAL.
     
    -PICKUP INFORMATION
    When placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.

    Cage Includes aluminum roof

    Cage DOES NOT come standard with grab bars. Those must be added for an additional charge.

    Please indicate color of cage and roof, if you chose the powder coat option.

    Select options
  • Light Bar Mounting Tabs

    $55.00

    These mounting tabs can be used to mount a 30-34 inch light bar or single pods.

    They are powder coated black.

    They do not come with hardware. You will use the hardware from your cage to mount them.

    The tabs mount to the bottom bung of your aftermarket or stock cage.

    Add to cart
  • Turbo S- Steel High Clearance HD Trailing Arms

    $875.00$925.00

    FITMENT: 2018-CURRENT TURBO S MODELS ONLY!

    Made from 1-1/2” x 3” Rectangle tubing 3/16” Wall, ¼” plate, 3/16” plate, and 11 gauge Plate.

    Provides up to 5” of much needed clearance over factory Turbo S trailing arm

    Provides protection for axle boots

    Utilizes all factory mounting points, as well as holes to mount brake lines

    You may choose the color of the Trailing arm itself, however the brake line logo bracket comes powder coated black. 

    These trailing arms hold a lifetime warranty. 

    There is no warranty on wear parts. (Uniball/Misaliments). 

     

    Select options
  • Ranger 1000 Tie Rods

    $189.00$295.00

    This listing is for Ranger 1000 Tie Rods

    These will only fit a Ranger 1000

    Factory ends are not warrantied, only the tie rod itself. 

    To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. ( measuring is recommended )

    They are made out of 6061 Aluminum. 

    They have a billet finish. 

    Select options
  • 1K/Turbo/RS1- Steel HD Trailing Arms

    $825.00$875.00

    FITMENT: 1K/TURBO/RS1

    These Steel HD Trailing Arms are built from 1″ 1/2 x 3 3/16 Rectangle Tubing.

    You may choose the color of the Trailing arm itself, however the brake line logo bracket comes powder coated black. 

    These trailing arms hold a lifetime warranty. 

    They are not under warranty for racing applications, and there is no warranty on wear parts. (Uniball/Misalignments). 

    Select options
  • Turbo S -Rear Sway Bar Links

    $100.00

    REAR Sway Bar Links:

    This listing is for Turbo S models ONLY.

    Made of 6061

    These come with misalignment spacers needed to install.

    Add to cart
  • Clevis Tie Rod ENDS 1000/Turbo

    $45.00$90.00

    These are the ENDS ONLY

    These only fit 1000/ Turbo models

    Select options
  • Logo Hat

    $25.00$35.00

    Rep L and W in these top quality Richardson 112 hats. This hat is the most durable and comfortable out there! Top quality stitching!  To add to your L and W merch collection check out this link: https://landwfab.com/merch/

    Select options
  • Turbo R – 2 Seater Tree Kickers

    $585.00$645.00

    2022CURRENT POLARIS RZR TURBO R 2 SEAT (ALL MODELS) TREE

    KICKERS


    FITMENT:


    Fits All trims of The Turbo R, and also works well with Pro XP long travel

    • MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
    • PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME

    • COMES RAW OR ANY POLARIS OEM COLOR

    • HEAVY DUTY THROUGHFRAME HARDWARE MADE BY L&W FAB

    • NO DRILLING REQUIRED

    • DESIGNED FOR 7274” MACHINES


    • Hardware for complete set (1 driver and 1 passenger):


      (6) plastic end caps for 1.75 x .120 tube


      (12) SAE ½” flat washers


      (6) ½” lock washers


      (6) ½13 THIN nylon insert locknut


      (6) ½”13 x 1” GR8 hex bolts


      (4) pro xp front frame PIN (L&W made)


      (2) pro xp rear frame PIN (L&W made)

    American Made. 

     

     

    Select options
  • 4 Seater Pro XP Cage

    $2,000.00$2,500.00
    IMPORTANT CAGE INFORMATION
    ALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.
     
    -IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.
    Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.
    Please allow 24 – 48hrs for an email response with your quote.
    -ALSO PLEASE NOTE ALL SALES ARE FINAL.
     
    -PICKUP INFORMATION
    When placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.

    Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.

     

    Please indicate color of cage and roof, if you chose the powder coat option.

    Select options
  • Turbo S- 4 Seater Tree Kickers

    $725.00$800.00

    This listing is for a set (driver and passenger) of 4 seater tree kickers.

    Model fitment: Turbo S

    American Made. 

    Made from 1 3/4 tubing.120 wall dom.

     

    Select options
  • PRO XP – RADIUS ROD PLATE

    $165.00$185.00

    Fitment: 2020current Polaris Pro XP


    Made from 6061T6 Billet aluminum



    Adds strength as well as looks



    Comes with pull point

    PLEASE NOTE: If powder coat option is chosen only the plate itself will be powdered, the pull point will always be billet aluminum.

    Select options
  • PRO R -2 SEAT TREE KICKERS

    $670.00$735.00

    2022CURRENT POLARIS RZR PRO R 2 SEAT (ALL MODELS) TREE KICKERS

    FITMENT:


    Fits All trims of The RZR PRO R.


    MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)


    PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME


    COMES RAW OR ANY POLARIS OEM COLOR


    HEAVY DUTY THROUGHFRAME HARDWARE MADE BY L&W FAB


    NO DRILLING REQUIRED



    Hardware for complete set (1 driver and 1 passenger):


    (6) plastic end caps for 1.75 x .120 tube


    (12) SAE ½” flat washers


    (6) ½” lock washers


    (6) ½13 THIN nylon insert locknut


    (6) ½”13 x 1” GR8 hex bolts


    (4) pro xp front frame PIN (L&W made)


    (2) pro xp rear frame PIN (L&W made)

    Select options
  • Talon A Arm Bushing

    $70.00$129.00

    These bushings will only fit L&W Honda Talon Arms

    These are not factory replacements.

    Select options
  • Front Ranger A Arms (Front Only) (2″ Forward) Adjustable Lowers (18-19 1000 Models)

    $750.00

    Front Only 

    These are made for Ranger 1000 models 2018-19

    They are Adjustable 

    Made in the US

    Lifetime Warranty 

    Made from 1 1/4 tubing 120 wall dom 

    Select options
  • 900S /1000S Tie Rods

    $189.00$295.00

    This listing is for 900 S / 1000 S Tie Rods

    These are for the S models ONLY

    They are made out of 6061 Aluminum. 

    They have a billet finish. 

     Made in America. 

    Lifetime Warranty on the rods. 

     

    Factory ends are not warrantied, only the tie rod itself. 

     

    Specs for HD Rebuild-able Tie Rod Ends:

    Fully rebuild-able

    Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

    100 percent made in USA

    This product holds an 18 month warranty

    Select options
  • Honda Talon Tie Rods (R Edition)

    $210.00

    Honda Talon Tie Rods (R EDITION ONLY)  This listing is for a SET  Tie Rods are made from 6061 Aluminum and have a billet finish  These Tie Rods use the factory inners and outers piece. This listing is for the rods only! Made in the USA  Lifetime Warranty   

    Add to cart
  • L&W Magnetic Koozie

    $12.00

    These Koozie are a heavy quality neoprene with strong, sturdy magnets. 

    Making these the perfect drink holder for riding. 

    These will hold a drink while attached to the side off your cage or anything magnetic. 

    Add to cart
  • PRO R / Turbo R Winch Mount

    $150.00

    Fitment: 2022 PRO R/ Turbo R

    Must remove factory bull bar to be used.
    Works with 3500-6k winches.
    Nice, clean installation.

     

    Fairlead and Winch purchased separately

    Select options
  • PRO Grill WITHOUT Lightbar

    $165.00

    PRO XP/R GRILL

    FITMENT: All Pro XP models and Pro R/ Turbo R models

    Easily snaps in and out.

    Not screwed to the machine.

    Must drill 4 holes to install snap tab.

    Side Vent color will be the same color you choose for the grill overlay color.

    Side Vents DO NOT WORK WITH PRO XP MODELS

    TO PURCHASE JUST THE SIDE VENTS PLEASE CLICK THE LINK BELOW:

    https://landwfab.com/product/pro-r-turbo-r-side-vents/

    Select options
  • L&W Rear Inner Fender Mud Guard- PRO R

    $55.00

    FOR PRO R MODELS ONLY! (All Trims)

    This Product is for the set (Driver & Passenger Side.)

    Made from 18 Gauge Steel.

    Comes with hardware needed for install.

    Select options
  • PRO XP- Steel HD Trailing Arms

    $825.00$875.00

    FITMENT: 2020-CURRENT PRO XP

    These Steel HD Trailing Arms are built from 1″ 1/2 x 3 3/16 Rectangle Tubing.

    You may choose the color of the Trailing arm itself, however the brake line logo bracket comes powder coated black. 

    These trailing arms hold a lifetime warranty. 

    They are not under warranty for racing applications, and there is no warranty on wear parts. (Uniball/Misalignments). 

    Select options
  • 6” Aluminum Fairlead

    $50.00

    6 inch fairlead.

    Comes with the hardware pictured.

    Compatible with L&W bumpers.

    Also compatible with all bumpers with 6″ mounting holes or any winch mount requiring a 6″ mount fairlead. 

    Made out of 6061 aluminum

    1 inch thick. 

    Add to cart
  • Receiver Hitch Plate for Factory Replacement

    $145.00

    This receiver hitch plate is for anyone that isn’t planning on running a bumper, or is running bumper that requires the use of a factory shaped radius rod plate. 

    It is just a direct replacement of the factory radius rod plate with an added receiver hitch.

    This only comes in black.

    Material Specs:

    1/4″ thick HRPO steel. 

    Receiver protrusion for all variations is 5-15/16″

    All variations accepts standard 2″ receiver with 5/8″ pin

    Select options
  • 1K/Turbo-Rear Bumper (14-18 Model)

    $350.00$400.00

    This Listing is for 1k/turbo 14-18 Model only!
    It WILL NOT fit a 2019-up model rzr. 

    This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. Made from 1.75 x .120 Wall Steel

     CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

    Select options
  • PRP 4.2 Harness

    $110.99

    L & W now carries PRP 4.2 UTV harnesses. This sleek 4 point harness will provide superior safety for your UTV, all while remaining comfortable for hours and miles of riding! The EZ adjuster feature allows for a quick and easy adjustment in even the muddiest conditions. This harness is available in a variety of colors: Red, Blue, Black, Silver, and Orange! Make an uncomfortable UTV harness a thing of the past in your riding experience.

    Select options
  • 1K/TURBO- Receiver Hitch Plate for L&W Bumper

    $145.00

    This is a replacement for the steel or billet radius plates that are used in correspondence with an L&W Bumper.

    They come in black only.

    Material Specs:

    1/4″ thick HRPO steel. 

    Receiver protrusion for all variations is 5-15/16″

    All variations accepts standard 2″ receiver with 5/8″ pin

    Select options
  • Offroad Rugged X-Grip Phone / Tablet Mount for Roll Cage

    $65.33$125.85
    • American made
    • Comes with Ram Mounts X-Grip
    • Each clamp is 1/2″ thick
    • These will fit 1.75″ tubing
    • Great way to mount your phone to any tubing
    • Made from 6061-T6 Billet Aluminum

     Large Ram mount phone holder will except a phone width from 1.75″ to 4.50″

     Small Ram mount tablet holder will except a tablet width from 2.50″ to 5.75″

     Large Ram mount tablet holder will except a tablet width from 6.25″ to 8.10″ and 10.25″ long

    Select options
  • 1.5” BRAKE LINE CLAMPS

    $45.00$80.00

    1.5” BRAKE LINE CLAMPS

    Made from 6061 billet aluminum


    Clamps work with the following L&W Arms.


    All Pro XP A arms


    All Turbo S A arms


    All long travel A arms


    Also can be used on other arms where 1.5” OD tubing is used


    Comes with stainless hardware

    Select options
  • PRO R 4 Seater Tree Kickers

    $1,050.00$1,150.00

    2022-CURRENT POLARIS RZR PRO R 4 SEAT TREE KICKERS

    MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
    PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
    COMES RAW OR ANY POLARIS OEM COLOR
    HEAVY DUTY THROUGH-FRAME HARDWARE MADE BY L&W FAB
    NO DRILLING REQUIRED
    **2PC DESIGN
    DESIGNED FOR 74” MACHINES
    KICKS OUT 9”

    Hardware for complete set (1 driver and 1 passenger):
    (6) plastic end caps for 1.75 x .120 tube
    (16) SAE ½” flat washers
    (8) ½” lock washers
    (8) ½-13 THIN nylon insert locknut
    (8) ½”-13 x 1” GR8 hex bolts
    (8) 3/8-16 X 1” STAINLESS STEEL ALLEN HEAD BOLTS
    (6) pro xp front frame PIN (L&W made)
    (2) pro xp rear frame PIN (L&W made)

    Select options
  • Race Style REAR Bumper (2019-2023)

    $325.00$375.00

    This listing is for 1K/TURBO models only.

    This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. 

    Made from 1.75 x .120 Wall Steel

    CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

     

     

     

    Select options
  • Polaris RZR XP 1000 Heavy Duty Axles – Rhino 2.0

    $239.95

    Fitment

    • Polaris RZR XP 1000 : 2014+
    • Polaris RZR XP 4 1000 : 2014+
    • Polaris RZR XP 1000 High Lifter Edition : 2016+
    • Polaris RZR XP 1000 Trails & Rocks Edition (AZ) : 2017+

    NOTE: Not compatible with Anti-Lock Brake Systems (ABS)

    Features

    • 100% stronger than stock
    • Utilizes the Rhino 2.0 Formula
      • Size: Massive 4mm increase in size!
      • Materials
      • Heat Treatment
    • Constructed of 4340 chromoly steel and finished with a proprietary heat treatment
    • Industry leading 18-month warranty
    • Field and lab tested for extreme strength and endurance
    • CAD drawn for expert precision
    Select options
  • RZR XP TURBO/ TURBO S- SIDE VENT COVERS

    $80.00$205.00

    POLARIS RZR XP TURBO/ TURBO S- SIDE VENT COVERS

    Made from 18ga steel


    Comes with all necessary hardware. Drilling requiried


    Add some bling to your XP Turbo while also protecting the frog skin


    Can be bought as 2pc (outside only/Inside Only) or 4 pc(inside and outside)

     

    • Mesh will be black *

    ONLY FIT ’17 and up models!

    Select options
  • TURBO R 2 SEAT CAGE

    $1,300.00$1,700.00

    TURBO R 2 SEAT CAGE
    Fits 2022-current Polaris TURBO R 2 SEATER
    Cages are made from 1.75” DOM.
    7” chop measured at B Pillar (Driver head)

    IMPORTANT CAGE INFORMATION
    ALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.
     
    -IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.
    Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.
    Please allow 24 – 48hrs for an email response with your quote.
    -ALSO PLEASE NOTE ALL SALES ARE FINAL.
     
    -PICKUP INFORMATION
    When placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.

    Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.

     

    Please indicate color of cage and roof, if you chose the powder coat option. (IF YOU CHOOSE A RAW CAGE, YOU MUST CHOOSE A RAW ROOF!)

    We will not add options for lower windshield bar or intrusion bars.

    Select options
  • Turbo R- 2 Heim Radius Rods

    $375.00$790.00

    Fitment:  2022 TURBO R

    Massive 2” direct bolt lowers, utilizing ¾” uniballs.

    1.5” thick adjustable uppers with ¾” heims on both ends.

    Made of 6061 T6 Billet Aluminum

    Select options

Click here to assign a widget for this area.