Pro XP Winch Mount

Related products

• 

  Bushing Kit Big Bolt

  $55.00

  Big Bolt uses 18 mm socket

  Models from mid 2017 to 2019 use big bolt.

  Adjustable Upper and Direct Bolt on Lower 

  This radius rod bushing kit will only work with L&W radius rods. They will not work with the stock radius rods.

  Select options
• 

  Turbo S Clevis Tie Rod ENDS

  $45.00 – $90.00

  These are the ENDS ONLY

  These only fit Turbo S Models

  Select options
• 

  Tie Rods – Factory Style

  $189.00 – $339.99

  These Tie Rods Fit Polaris RZR 1000 and Turbo

  Specs on the Rods:

  These are factory style ball and socket tie rods. 

  This listing is for a SET

  6061 Aluminum. 

  Made in America

  Lifetime Warranty on rod itself.

  Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end) 

  To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. **2016 Turbo will always be M14**

   

  Factory ends are not warrantied, only the tie rod itself. 

   

  Specs for HD Rebuild-able Tie Rod Ends:

  Fully rebuildable

  Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

  100 percent made in USA

  This product holds an 18 month warranty

  Options:

  1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)

  2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)

  https://landwfab.com/product-category/rzr-parts/tie-rods/

  https://www.facebook.com/landwfab/

   

  Select options
• 

  Clevis Style Tie Rods (1K/Turbo)

  $189.00

  These are clevis style tie rods (heavy duty).

  This listing is for a SET

  Tie Rod ends are not consistent across all models or years. Please make sure to measure the rack end of stock tie rods to be sure of which size you need.

  To determine what size you need, please measure the end of your tie rod that screws into the rack, if the measurement is less the 1/2″ you will need M14, if it is more then 1/2″ you will need M16.

  These tie rods are made to work well for a racing style application. 

  6061 Aluminum. 

  Made in America

  Life Warranty. 

  Ends are not warrantied, only the tie rod itself. 

   

  Select options