Showing all 22 results

• 

  Heim Replacements

  $18.00 – $25.00

  This Listing is for 5/8 & 3/4 Heims.

  These are replacement Heims only, they do not carry any warranty as they are considered a wear part.

  We recommend keeping them greased with a non water based lubricant for a longer lasting use. 

  WE OFFER BOTH LEFT AND RIGHT HAND THREADS.

  PLEASE READ FITMENT BELOW IF NEEDING TO KNOW WHICH THREAD TO PURCHASE FOR L&W PRODUCTS.

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Uniball and Snap Ring Replacements

  $8.00 – $25.00

  Uniball and Snap ring replacements for L&W Radius Rods and Trailing Arms.

  PLEASE MEASURE THE INSIDE DIAMETER OF YOUR CURRENT UNIBALL TO MAKE SURE YOU GET THE CORRECT REPLACEMENT FOR YOUR PARTS. (L&W is NOT responsible for knowing the size Uniball needed for your product, as some may vary.)

  These are considered wear items and are not covered under warranty claims. 

  We recommend using a NON water-based lubricant on these for longer lasting use. 

   

  SEE FITMENTS BELOW

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  XP1000/TURBO- A-Arm Bushings

  $60.00 – $129.00

  Bushing by Performance Side X Side

   

  These bushings WILL NOT fit the Turbo S, PRO XP, OR RS1 MODEL. They will only fit the 1000 and Turbo RZR models. 

   

  They do not fit a General

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  1K/Turbo -Spindle End for Tie Rods

  $20.00 – $40.00

  This is a REPLACEMENT spindle end for tie rods. 

  If you have just purchased our tie rods, the spindle end will come with them. 

  This is just a replacement piece. 

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Tree Kicker Bolt Kit

  $40.00 – $150.00

  This tree kicker bolt kit is for 2 or 4 seater L&W tree kickers. 

  (1K/TURBO/TURBO-S) 2 seater set comes with 4 L bolts.

  (1K/TURBO/TURBO-S) 4 seater set comes with 6 L bolts.

  (PRO XP) 2 seater set comes with 6 frame pins. 

  (PRO XP) 4 seater set comes with 8 frame pins.

  This is just a replacement kit. 

  For new tree kickers, click the link below. 

   

  If you are looking for new tree kickers please click here- https://landwfab.com/?s=TREE+KICKERS&product_cat=0&post_type=product

  http://facebook.com/landwfab

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Radius Rod Bushing Kit

  $27.50 – $85.00

  These bushing kits will only work with L&W radius rods.

  These will not work with the stock radius rods.

  This kit does not include the uniball “bearings”, only the misalignment spacers.

  This listing is for EITHER; UPPER KIT/ LOWER KIT OR FULL KIT.

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Keller Ball Joint

  $145.00 – $580.00

  The Mega Ball Joints are used for our mega ball joint a arms. The will not fit a regular a arm.

  These ball joints are for rzr only (XP, TURBO, RS1, PRO XP, TURBO S). They do not fit a general or Ranger. 

   These ball joints have a hardened body and stem. Stem is built from AMERICAN made 4340 and hardened for maximum strength and wear resistance. Adjustable and greaseable with a replaceable boot.

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Replacement Tie Rod Ends.

  $18.00 – $135.00

  (1000 / Turbo /Turbo S/ PRO XP / RS1 Models)

  This is a replacement for our factory style tie rod ends.

  Please see product photos for warranty information 

   

  To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. 2016 Turbo will always be M14/ PRO XP is M16

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Turbo S/Pro XP- Spindle End Replacement

  $20.00 – $40.00

  This is a replacement spindle end for Turbo S AND Pro XP tie rods.

  If you have just purchased our tie rods, the spindle end will come with them. 

  This is just a replacement piece. 

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Aluminum End Caps for Bumpers and Tree Kickers

  $10.00 – $60.00

  These are aluminum replacement end caps for L&W bumpers and tree kickers. 

  These are aluminum replacement end caps for L&W bumpers and tree kickers. 

  **The spiked end caps may interfere with larger tires if installing with tree kickers.**

   

  • MADE IN USA
  • Perfect for Tubing ends
  • Machined from 6061-T6 aluminum

  FITMENT:

  1.75 tubing diameter

  .120 wall thickness

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Honda Talon -Radius Rod bushing kit

  $27.50 – $55.00

  These bushing kits will only work with L&W radius rods.

  These will not work with the stock radius rods.

  This listing is for EITHER; UPPER KIT/ LOWER KIT OR FULL KIT.

  In order for us to send you the correct parts we will need to know which sizes you need. With the Honda Talon you will have to measure the inside diameter of your spiracle bearings so that you get the correct replacements. If you are unable to measure, you can send a photo of the misalignment spacers you currently have and email them over to Taylor@landwfab.com so that she can try to help you determine what size to choose. Please note it is not guaranteed that she will be able to tell you what size to order if she is unable to determine it by the photos provided to her.

  It should be either of these

  12mm and ¾

  15mm and ¾

  Or All 15mm

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  End Caps for Bumpers/Tree Kickers

  $12.00 – $20.00

  These are plastic replacement end caps for L&W bumpers and tree kickers. 

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Clevis Tie Rod ENDS 1000/Turbo

  $45.00 – $90.00

  These are the ENDS ONLY

  These only fit 1000/ Turbo models

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Offroad Rugged X-Grip Phone / Tablet Mount for Roll Cage

  $65.33 – $125.85

  • American made
  • Comes with Ram Mounts X-Grip
  • Each clamp is 1/2″ thick
  • These will fit 1.75″ tubing
  • Great way to mount your phone to any tubing
  • Made from 6061-T6 Billet Aluminum

   Large Ram mount phone holder will except a phone width from 1.75″ to 4.50″

   Small Ram mount tablet holder will except a tablet width from 2.50″ to 5.75″

   Large Ram mount tablet holder will except a tablet width from 6.25″ to 8.10″ and 10.25″ long

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Turbo S/Pro XP Front A-Arm Bushings

  $220.00

  PLEASE NOTE THAT THESE MAY BE PURCHASED AS “AVAILABLE ON BACKORDER”, MEANING SHIP TIMES WILL BE DELAYED. (CURRENT ETA IS 4 WEEKS OUT.)

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Sway Bar Link Replacement Bushing Kit

  $35.00

  This bushing kit will only work with L&W sway bar links.

  They will not work with the stock sway bars.

  This listing is for a SET.

  (8 misalignment spacers total)

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Winch Plate replacement kit for L&W Winch Bumper

  $50.00

  This is the replacement plates and hardware for a L&W Winch Bumper

   

  This will not work with non- L&W Bumpers

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Trailing Arm Replacement Bushing Kit

  $20.00

  This  bushing kit will only work with L&W Trailing Arms

  They will not work with the stock Trailing Arms.

  This listing is for a FULL SET.

  (4 misalignment spacers total)

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Turbo S Clevis Tie Rod ENDS

  $45.00 – $90.00

  These are the ENDS ONLY

  These only fit Turbo S Models

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Brake Line Extension for L&W Long Travel Kits.

  $55.00

  BRAKE LINE EXTENSION

  THIS LISTING IS FOR 1 BRAKE LINE EXTENSION. 

  (For L&W XP AND PRO XP LONG TRAVELS)

  10mm 20° Banjo by 10mm Banjo 90° Side Bend,
  60 inches OAL. Carbon Steel fittings, -03
  Stainless Steel Braided DOT Brake Hose.
  Jacket Color – Clear
  Orientation – 20° up with 90° flat to left

  Add to cart
• 

  Packout Mount replacement hardware

  $25.00

  This is the replacement hardware kit for our Packout mounts.

  • DOES NOT INCLUDE MOUNT

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Adjustable A Arm Cups

  $100.00

  These are replacements for the adjustable a arm CUPS ONLY. 

  These will work with L&W adjustable A Arms ONLY. 

  We are not responsible for them not fitting other brands adjustable a arms and they are not available for return or refund due to fitment issues with another brand of A Arm. 

   

  Select options This product has multiple variants. The options may be chosen on the product page