Category
- Newest Products
- Bumpers with Shipping
- Can Am
- Honda
- Kawasaki
- Merch
- Polaris
- General
- Ranger
- RZR
- 800/900
- 900 S/ 1000 S
- 900S
- A Arms
- Accessories
- Axles
- Ball Joints
- Brake Line Clamps
- Bumpers for Polaris RZR
- Bushings
- Cages
- Drink Holder
- Full Suspension Kit
- Harnesses
- Heims
- PRO XP
- RS1
- RZR 1000
- RZR RADIUS RODS
- RZR Radius Rods
- RZR Tie Rods
- RZR Turbo
- Seat Lowering Base
- Skid Plate
- Sway Bar Links
- Trailing Arms
- tree kickers
- Turbo S
- Winches
- Windshield
- Tree Kicker Shipping
- Trinity Racing Products
- Wheels and Tires
Category: Turbo S
Turbo S
Showing 1–28 of 36 results
-
Seat Lowering Bases
$70.00 – $100.00Select optionsINTRODUCING THE ALL NEW L&W SEAT LOWERING BASE!-Easier to Install
-Uses Stock Slider
-Slider Plate integrated
-Harness 5th Point Mount
-Lowers 2”
-Reclines 5.2 degrees- Powder Coated Black
- ALL HARDWARE IS INCLUDED, you do not need to purchase it separately.
-
Turbo S Tie Rods
$199.00 – $299.99Select optionsTurbo S Tie Rods:
This listing is for a SET
Comes with spindle ends.
6061 Aluminum.
Made in America
Lifetime Warranty on the Tie Rod itself.
Factory ends are not warrantied, only the tie rod itself.
Specs for HD Rebuild-able Tie Rod Ends:
Fully rebuild-able
Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished
100 percent made in USA
This product holds an 18 month warranty
-
Aftermarket Mount Plate for Milwaukee Packout
$120.00Add to cartMilwaukee Packout mount plate:
Works with all Polaris RZR XP1000/Turbo, Turbo S. Also works with Highlifter editions.
Made with 10ga HRPO steel.
Easily installed/removed with no tools using the supplied hardware.
Mount is slotted for different configurations of boxes to maximize trunk room for coolers.
Most coolers under 26qt will still fit. -
Direct Bolt Radius Rods -Turbo S
$255.00 – $515.00Select optionsPLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING
Turbo S Direct Bolt Radius Rods
Made from Billet Aluminum.
Includes all spacers needed for install.
Does not include Turbo S Radius plate, to purchase a radius plate click here.
-
Factory Tie Rod Ends (1000 / Turbo /Turbo S/ PRO XP / RS1 Models)
$18.00 – $119.99Select optionsThis is a replacement for our factory tie rods ends for the 1000 and turbo models.
Please see photo description for warranty information
To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. 2016 Turbo will always be M14/ PRO XP is M16
-
Turbo S A Arms
$350.00 – $700.00Select optionsThese Turbo S Arms are made from 1.5″ tubing, 120 wall dom, and have some 1.25 bracing
Uses the factory bushings.
They are covered by a lifetime warranty and are made in the USA.
Please Place color in the year model section and in the notes, if choosing the powder coated option.
-
Turbo S Winch Bumper (19-Current)
$400.00 – $425.00Select optionsOur Turbo S Winch Bumper will fit 19- current model TURBO S.
This bumper comes with all hardware needed.
Will fit 3500-6000 lb winch. (Black Ops preferred, but will take other winches brands as well)
Install Instructions : https://landwfab.com/wp-content/uploads/2020/02/RZR-Winch-Mount-Bumper.pdf
-
Turbo S 2 Heim Adjustable Radius Rods
$255.00 – $515.00Select optionsPLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING
Made from Billet Aluminum.
Includes all spacers needed for install. (If you need replacement bushings, please see the suggested products below, or go to RZR tab and click on bushings.)
Does not include Turbo S Radius plate, to purchase a radius plate click here.
-
Exhaust Cover for RZR Turbo/ Turbo S
$60.00Select optionsSpecifications on Exhaust Cover for RZR:
It is made from 18 gauge steel.
No modifications are required to the machine
Works with factory and slip on exhausts
Fitment:
2018-Current XP Turbo
2018- Current Turbo S
This product does not ship raw. All colors listed are the only colors offered under this pricing.
For exhausts please click the link below:
https://landwfab.com/product-category/trinity-racing-products/mufflers/
-
Cooler Mount for Turbo S
$85.00Select optionsCooler Mounts:
This listing is for TURBO S ONLY
Cooler Mount (Factory Cage) Specs:
1. Works with All Turbo S with factory cage
[video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/TURBO-S-COOLER-MOUNT-FACTORY-CAGE.mp4"][/video]
2. Made from 3/16 HRPO
3. Comes with all hardware needed
4. Fully adjustable to fit over 30 different cooler models including these top models:
i) YETI Tundra 35
ii) RTIC 20
iii) YETI 20
iv) Ozark 26
v) NICE 26
5. Comes powder coated blackCooler Mount (Aftermarket Cage) Specs:
1. Works with most Turbo S with aftermarket cage that doesn’t utilize rear support bars.
[video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/TURBO-S-COOLER-MOUNT-AFTERMARKET-CAGE.mp4"][/video]
2. Made from 3/16 HRPO
3. Comes with all hardware
4. Fully adjustable to fit over 30 different cooler models including these top models:
i) YETI Tundra 35
ii) RTIC 20
iii) YETI 20
iv) Ozark 26
v) NICE 26
5. Comes powder coated black -
1K/ Turbo/ Turbo S – 2 Seater Cage
$867.00 – $1,350.00Select optionsCAGES ARE FOR PICKUP ONLY
ALL CAGES ARE ON A 10-12 WEEK TIME FRAME
Please indicate in the notes-
Model and Year of Your RZR
If getting powder coat please also indicate color of cage and color of roof.
Standard colors are: Matte Black, Red, White, Silver, Lime Squeeze, Orange, Rust Orange, Sky Blue, and Velocity Blue
Any non- OEM colors will be considered a special order color and could incur extra charges.
-
Streetman Cage – 1K/ Turbo / Turbo S – 4 Seater
$1,600.00 – $2,000.00Select optionsCAGES ARE FOR PICKUP ONLY
ALL CAGES ARE ON A 10-12 WEEK TIME FRAME
Streetman Standard is a 7″ Chop
Streetman Low is a 9″ Chop
Please indicate color of cage and roof in notes, if you chose the powder coat option.
Standard colors are: Matte Black, Red, White, Silver, Lime Squeeze, Orange, Rust Orange, Sky Blue, and Velocity Blue
Any non- OEM colors will be considered a special order color and could incur extra charges.
Grab handles on blue rzr is a custom add-on, does not come on production cages.
-
Offroad Rugged X-Grip Phone / Tablet Mount for Roll Cage
$65.33 – $125.85Select options- American made
- Comes with Ram Mounts X-Grip
- Each clamp is 1/2″ thick
- These will fit 1.75″ tubing
- Great way to mount your phone to any tubing
- Made from 6061-T6 Billet Aluminum
Large Ram mount phone holder will except a phone width from 1.75″ to 4.50″
Small Ram mount tablet holder will except a tablet width from 2.50″ to 5.75″
Large Ram mount tablet holder will except a tablet width from 6.25″ to 8.10″ and 10.25″ long
-
FORWARD Turbo S A Arms (MEGA BALL JOINT)
$650.00 – $700.00Select optionsThis listing REQUIRES the purchase of Mega Keller Ball Joints
https://landwfab.com/product/keller-ball-joints/
These A Arms are:
1.5 x .120 and 1.25 x .120 DOM
1.75″ Forward offset
Can clear 35″ tires
Reuses factory bushings
They are covered by a lifetime warranty and are made in the USA.
-
Gordon Cage – 1K/ Turbo / Turbo S – 4 Seater
$1,600.00 – $2,000.00Select optionsCAGES ARE FOR PICKUP ONLY
ALL CAGES ARE ON A 10-12 WEEK TIME FRAME
Gordon Standard is a 6″ Chop
Gordon Low is a 8″ Chop
Cage DOES NOT come standard with grab bars. Those must be added.
Please indicate color of cage and roof in notes, if you chose the powder coat option.
Standard colors are: Matte Black, Red, White, Silver, Lime Squeeze, Orange, Rust Orange, Sky Blue, and Velocity Blue
Any non- OEM colors will be considered a special order color and could incur extra charges.
-
Turbo S A Arms (Mega Ball Joint)
$350.00 – $700.00Select optionsThese Turbo S Arms are made from 1.5″ tubing, 120 wall dom, and have some 1.25 bracing
These have to have the KELLER MEGA BALL JOINTS
Uses the factory bushings.
They are covered by a lifetime warranty and are made in the USA.
Please Place color in the year model section and in the notes, if choosing the powder coated option.