0$0.00

No products in the cart.

Category

Category

Aftermarket Mount Plate for Milwaukee Packout

$120.00

Milwaukee Packout mount plate:

Works with all Polaris RZR XP1000/Turbo, Turbo S. Also works with Highlifter editions.

Made with 10ga HRPO steel.
Easily installed/removed with no tools using the supplied hardware.
Mount is slotted for different configurations of boxes to maximize trunk room for coolers.
Most coolers under 26qt will still fit.

Product price
Additional options total:
Order total:

Milwaukee Packout mount plate:

Works with all Polaris RZR XP1000/Turbo, Turbo S. Also works with Highlifter editions.

Made with 10ga HRPO steel.
Easily installed/removed with no tools using the supplied hardware.
Mount is slotted for different configurations of boxes to maximize trunk room for coolers.
Most coolers under 26qt will still fit.

PLEASE NOTE: WE ARE NOT RESPONSIBLE FOR OTHER AFTERMARKET COOLER MOUNTS NOT BEING COMPATABLE WITH USE OF OUR PACKOUT MOUNT, WE ARE ALSO NOT RESPONSIBLE FOR THE BIG PACKOUT BOXES RUBBING WITH 26QT COOLERS. ( You will have to configure your pack out boxes for the best fitment when running a cooler.)

Weight 10 lbs
SKU: MIL-PO-MNT Categories: , , , , ,

Related products

  • Clevis Ends

    Turbo S Clevis Tie Rod ENDS

    $45.00 – $90.00

    These are the ENDS ONLY

    These only fit Turbo S Models

    Select options
  • Sale! Ball and Socket Tie Rods

    1K/Turbo Tie Rods – Factory Style

    $189.00 – $290.00

    These Tie Rods Fit Polaris RZR 1000 and Turbo

    Specs on the Rods:

    These are factory style ball and socket tie rods. 

    This listing is for a SET

    6061 Aluminum. 

    Made in America

    Lifetime Warranty on rod itself.

    Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end) 

    To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. **2016 Turbo will always be M14**

     

    Factory ends are not warrantied, only the tie rod itself. 

     

    Specs for HD Rebuild-able Tie Rod Ends:

    Fully rebuildable

    Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

    100 percent made in USA

    This product holds an 18 month warranty

    Options:

    1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)

    2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)

    https://landwfab.com/product-category/rzr-parts/tie-rods/

    https://www.facebook.com/landwfab/

     

    Select options
  • Mega Ball Joint A Arms

    Mega Ball Joint A Arms (1K/Turbo)

    $625.00 – $725.00

    These A Arms are constructed for Mega Ball Joints ONLY. 

    This is the listing for the standard mega ball joint A Arm.

    Lifetime Warranty 

    Free Shipping 

    Made in the USA 

    Select options

  • 5/8 Heim

    $15.00

    This Listing is for 5/8 Heims. (18 thread pitch)

    These are replacement Heims only, they do not carry any warranty as they are considered a wear part.

    We recommend keeping them greased with a non water based lubricant for a longer lasting use. 

    WE OFFER BOTH LEFT AND RIGHT HAND THREADS.

    PLEASE READ FITMENT BELOW IF NEEDING TO KNOW WHICH THREAD TO PURCHASE FOR L&W PRODUCTS.

    Select options

Search for Product by SKU

Follow Us