Seat Lowering Bases for General
$80.00 – $125.00
-Uses Stock Slider
-Slider Plate integrated
-Harness 5th Point Mount
-Lowers 2”
-Reclines 5.2 degrees
- Powder Coated Black
- HARDWARE KIT IS INCLUDED, you do not need to purchase it separately.
- There are pieces you need from the original seat base.
FITMENT:
These WILL NOT work on the passenger side seat without cutting some of the plastics behind the seat so that you may slide the base all the way back for it to latch correctly.
-Uses Stock Slider
-Slider Plate integrated
-Harness 5th Point Mount
-Lowers 2”
-Reclines 5.2 degrees
- Powder Coated Black
- HARDWARE KIT IS INCLUDED, you do not need to purchase it separately.
- There are pieces you need from the original seat base.
FITMENT:
These WILL NOT work on the passenger side seat without cutting some of the plastics behind the seat so that you may slide the base all the way back for it to latch correctly.
| Single / Set | Set, Single |
|---|
Related products
-
High Clearance A Arms 1K/Turbo (2017- Current Models)
$300.00 – $725.00Select optionsThese High Clearance A Arms are raw material.
1 1/4 tubing .120 wall DOM.
L and W offers a life time warranty on bending and breaking the A arms.
DOES NOT COME TAPPED FOR GREASE FITTINGS.
Please select raw in the color options if you do not want powder coating.
These now take 17 and up model bushings.
If you have a 14-16 model, you will need to purchase 17 & up model bushings.
Bushing Sold Separately. Please see link in description for bushings.
-
1K/TURBO- 2019 to Current Front Winch Bumper
$450.00 – $500.00Select optionsThis listing is for 19-CURRENT 1K/TURBO MODELS ONLY.
This bumper comes with all mounting winch plates and hardware needed to install.
(DOES NOT INCLUDE FAIRLEAD)
Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)
Wide Spool Winches DO Fit In This Bumper
These bumpers use a 6 inch fairlead.
WITH BROW: LOOPS AROUND HEADLIGHTS
NO BROW: UNDER HEADLIGHTS
-
1K/Turbo Tie Rods – Factory Style
$189.00 – $290.00Select optionsThese Tie Rods Fit Polaris RZR 1000 and Turbo
Specs on the Rods:
These are factory style ball and socket tie rods.
This listing is for a SET
6061 Aluminum.
Made in America
Lifetime Warranty on rod itself.
Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end)
To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. **2016 Turbo will always be M14**
Factory ends are not warrantied, only the tie rod itself.
Specs for HD Rebuild-able Tie Rod Ends:
Fully rebuildable
Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished
100 percent made in USA
This product holds an 18 month warranty
Options:
1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)
2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)
https://landwfab.com/product-category/rzr-parts/tie-rods/
https://www.facebook.com/landwfab/
