Category: Newest Products

Newest Products

Showing 1–40 of 66 results

Cooler Mount for 1k/ Turbo
$100.00

Cooler Mounts:

Fits a 1K/Turbo (For Turbo S, please see Turbo S Listing)

1. Works with All RZR XP including highlifter edition
2. Uses eye bolt Grip mount
3. All hardware included
4. Made from 3/16 HRPO
5. Fully adjustable to fit over 30 different cooler models including these top models:
i) YETI Tundra 35
ii) RTIC 20
iii) YETI 20
iv) Ozark 26
v) NICE 26

IS NOT COMPATIBLE WITH POLARIS OR PELICAN COOLERS.
6. Comes powder coated black

[video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/RZR-XP-TURBO-COOLER-MOUNT.mp4"][/video]
Add to cart
L&W Rear Inner Fender Mud Guard- PRO XP/ TURBO R
$65.00

FOR PRO XP/ TURBO R MODELS ONLY!

This Product is for the set (Driver & Passenger Side.)

Made from 18 Gauge Steel.

Comes with hardware needed for install.

Select options This product has multiple variants. The options may be chosen on the product page
RS1 Diff Plate
$225.00

Made of 11ga steel

Powder Coated Black

All hardware included

No wiring included. Wiring can be done by by splicing into the factory harness.

Instructions for cutting and Diff installation not included at this time, but can be found on Internet.

This version doesn’t allow use of winch mounting over the differential.

DOES NOT COME RED. Red is for Photo purposes ONLY.

Add to cart
Cooler Mount for Turbo S
$100.00

Cooler Mounts:

This listing is for TURBO S ONLY

Cooler Mount (Factory Cage) Specs:

1. Works with All Turbo S with factory cage
2. Made from 3/16 HRPO
3. Comes with all hardware needed
4. Fully adjustable to fit over 30 different cooler models including these top models:
i) YETI Tundra 35
ii) RTIC 20
iii) YETI 20
iv) Ozark 26
v) NICE 26

NOT COMPATIBLE WITH PELICAN OR POLARIS COOLERS
5. Comes powder coated black
[video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/TURBO-S-COOLER-MOUNT-FACTORY-CAGE.mp4"][/video]
Cooler Mount (Aftermarket Cage) Specs:

1. Works with most Turbo S with aftermarket cage that doesn’t utilize rear support bars.
2. Made from 3/16 HRPO
3. Comes with all hardware
4. Fully adjustable to fit over 30 different cooler models including these top models:
i) YETI Tundra 35
ii) RTIC 20
iii) YETI 20
iv) Ozark 26
v) NICE 26

NOT COMPATIBLE WITH PELICAN OR POLARIS COOLERS
5. Comes powder coated black
[video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/TURBO-S-COOLER-MOUNT-AFTERMARKET-CAGE.mp4"][/video]
Select options This product has multiple variants. The options may be chosen on the product page
Aftermarket Snap In Grill
$160.00

Options for outline color and L&W logo

The grill mesh will always be black

Fitment:

Turbo S

19-current models 1K/Turbo

*NOTE: THIS GRILL WILL NOT WORK WITH THE FACTORY POLARIS BUMPER WITHOUT MAKING SLIGHT MODIFICATIONS TO FIT.*

Select options
PRO XP- Sport Bumper
$300.00 – $350.00

This listing is for PRO XP models only.

(NON R MODEL)

FITMENT: 19-Current PRO XP

This front bumper comes with all hardware needed to install.

Made of 1.75” x .120” DOM , 11GA and 3/16” plate
Bumper works in CONJUNTION with aftermarket winch mounts.

This bumper is not a winch mount- Only a Fairlead mount
Works with most popular aftermarket winch mounts including KFI, SUPERATV, and L&W.
Integrated holes in corners for 3⁄4” blinkers

These bumpers use a 6 inch fairlead.

(fairlead is not included UNLESS purchased as an add on below)

we do not offer custom colors.

Select options This product has multiple variants. The options may be chosen on the product page
Turbo R 4 Seater Tree Kickers
$815.00 – $875.00

2022-CURRENT POLARIS RZR TURBO R 4 SEAT (ALL MODELS) TREE KICKERS
IDEAL FOR LONG TRAVEL PRO XP ALSO
FITS PRO XP, TURBO R, AND PRO R
MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
COMES RAW OR ANY POLARIS OEM COLOR
HEAVY DUTY THROUGH-FRAME HARDWARE MADE BY L&W FAB
NO DRILLING REQUIRED
**2PC DESIGN
DESIGNED FOR 74” MACHINES
KICKS OUT 9”

Hardware for complete set (1 driver and 1 passenger):
(6) plastic end caps for 1.75 x .120 tube
(16) SAE ½” flat washers
(8) ½” lock washers
(8) ½-13 THIN nylon insert locknut
(8) ½”-13 x 1” GR8 hex bolts
(8) 3/8-16 X 1” STAINLESS STEEL ALLEN HEAD BOLTS
(6) pro xp front frame PIN (L&W made)
(2) pro xp rear frame PIN (L&W made)

Select options This product has multiple variants. The options may be chosen on the product page
PRO R/TURBO R- RADIUS ROD PLATE
$160.00 – $180.00

PRO R/TURBO R RADIUS ROD PLATE

Fitment: 2022–current Polaris Pro R and 2022–current Polaris Turbo R

Made from 6061–T6 Billet aluminum

Adds strength as well as looks

Comes with pull point

This listing is for the radius plate only.

PLEASE NOTE: If powder coat option is chosen only the plate itself will be powdered, the pull point will always be billet aluminum

Select options This product has multiple variants. The options may be chosen on the product page
PRO XP FRAME CROSS MEMBER
$135.00 – $260.00

Made from 3/16 STEEL
The factory prop shaft crossmember is known to bend. When the crossmember bends, it
changes the prop shaft angle, and can lead to premature bearing failure and vibrations.

Our crossmembers are 2.5x thicker and add strength where it is needed.
Works with factory or aftermarket bearing carriers.
Bolts in using factory hardware

FITMENT:

2020-CURRENT PRO XP 4 SEAT

2020-CURRENT PRO XP 2 SEAT

2020-CURRENT PRO XP 4 SEAT REAR

Select options This product has multiple variants. The options may be chosen on the product page
PRO XP / TURBO R Rear Bumper
$400.00 – $455.00

Pro Xp/ TURBO R Rear Bumper

Fits 2020-current Polaris PRO XP and TURBO R
Easy bolt on installation. No drilling required
Made from 1.75” x .120 DOM

Select options This product has multiple variants. The options may be chosen on the product page
PRO Grill WITH Lightbar
$185.00

PRO XP/R GRILL

FITMENT: All Pro XP models and Pro R/ Turbo R models

If you choose to get the Grill it does Come with the Light Bar (does not include wiring harness)

Easily snaps in and out.

Not screwed to the machine.

Must drill 4 holes to install snap tab for main grill.

Side Vent color will be the same color you choose for the grill overlay color.

Select options
PRO R 2 Heim Radius Rods
$375.00 – $790.00

Fitment: 2022 PRO R

Massive 2” direct bolt lowers, utilizing ¾” uniballs.

1.5” thick adjustable uppers with ¾” heims on both ends.

Made of 6061 T6 Billet Aluminum

Select options This product has multiple variants. The options may be chosen on the product page
Aftermarket Snap In Grill with Light Bar
$185.00

Comes with Light Bar (does not include wiring harness)

Options for outline color and L&W logo

The grill mesh will always be black

Fitment:

Turbo S

19-current models 1K/Turbo

*NOTE: THIS GRILL WILL NOT WORK WITH THE FACTORY POLARIS BUMPER WITHOUT MAKING SLIGHT MODIFICATIONS TO FIT.*

Select options
Turbo S- Forward A Arms with Adjustable Uppers
$825.00 – $925.00

NEW PRODUCT PHOTO COMING SOON!

This set of A Arms has adjustable uppers.

The adjustment is in the uppers only, the lowers are direct bolt.

The A Arms are 1.75″ Forward. The adjustable pins have a 1 inch diameter.

You can reuse your stock bushings and stock ball joints.

Select options This product has multiple variants. The options may be chosen on the product page
PRO XP Long Travel Kit
$2,750.00 – $3,750.00
Fits 2020-current Polaris PRO XP

Bolt on installation.

No drilling required

This kit adds 4” to each side of a PRO XP giving it a 72” width with stock offset wheels.

Adds 3.5” to the wheelbase.

Front a arms are 1.75” forward offset, and rear trailing arms are 1.75” rear offset, which improves stability.

A arms are made from 1.5” DOM. and are high clearance.

Front and Rear keep factory shock location.

Can use factory PRO XP bushings and factory ball joints.

Only Steel Parts ( A Arms and Trailing Arms will come powder coated ). Additional add on charge for powder coating radius rods is available.

Kit includes:

Front upper and lower A arms. (Non- Adjustable)( Stock size ball joints only. These are not offered for Mega Ball Joints)

Set of Tie Rods with L&W HD rebuild-able inner joints.

High Clearance Steel HD Trailing Arms

High Clearance Billet Aluminum Radius Rods with adjustable uppers.

(1) Extended brake line for front passenger side

REQUIRES THE USE OF TURBO S AXLES and RZR XP/TURBO S HUBS that are not included

HUB OEM PART # 5141353-067

WE RECOMMEND A SPRING UPGRADE, AS THIS KIT WILL GREATLY INCREASE THE SOFTNESS OF

THE SPRINGS. (SPRINGS WILL COME POWDER COATED BLACK- ZBROZ)

****If Purchasing Ball Joints or A Arm Bushings, they WILL NOT come installed****
Select options This product has multiple variants. The options may be chosen on the product page
PRO R -2 SEAT TREE KICKERS
$670.00 – $735.00

2022–CURRENT POLARIS RZR PRO R 2 SEAT (ALL MODELS) TREE KICKERS

FITMENT:

Fits All trims of The RZR PRO R.

MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)

PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME

COMES RAW OR ANY POLARIS OEM COLOR

HEAVY DUTY THROUGH–FRAME HARDWARE MADE BY L&W FAB

NO DRILLING REQUIRED

Hardware for complete set (1 driver and 1 passenger):

(6) plastic end caps for 1.75 x .120 tube

(12) SAE ½” flat washers

(6) ½” lock washers

(6) ½–13 THIN nylon insert locknut

(6) ½”–13 x 1” GR8 hex bolts

(4) pro xp front frame PIN (L&W made)

(2) pro xp rear frame PIN (L&W made)

Select options This product has multiple variants. The options may be chosen on the product page
PRO XP – RADIUS ROD PLATE
$165.00 – $185.00

Fitment: 2020–current Polaris Pro XP

Made from 6061–T6 Billet aluminum

Adds strength as well as looks

Comes with pull point

PLEASE NOTE: If powder coat option is chosen only the plate itself will be powdered, the pull point will always be billet aluminum.

Select options This product has multiple variants. The options may be chosen on the product page
Light Bar Mounting Tabs
$55.00

These mounting tabs can be used to mount a 30-34 inch light bar or single pods.

They are powder coated black.

They do not come with hardware. You will use the hardware from your cage to mount them.

The tabs mount to the bottom bung of your aftermarket or stock cage.

Add to cart
PRO Grill WITHOUT Lightbar
$165.00

PRO XP/R GRILL

FITMENT: All Pro XP models and Pro R/ Turbo R models

Easily snaps in and out.

Not screwed to the machine.

Must drill 4 holes to install snap tab.

Side Vent color will be the same color you choose for the grill overlay color.

Side Vents DO NOT WORK WITH PRO XP MODELS

TO PURCHASE JUST THE SIDE VENTS PLEASE CLICK THE LINK BELOW:

https://landwfab.com/product/pro-r-turbo-r-side-vents/

Select options
Turbo R- 2 Heim Radius Rods
$375.00 – $790.00

Fitment: 2022 TURBO R

Massive 2” direct bolt lowers, utilizing ¾” uniballs.

1.5” thick adjustable uppers with ¾” heims on both ends.

Made of 6061 T6 Billet Aluminum

Select options This product has multiple variants. The options may be chosen on the product page
RZR XP TURBO/ TURBO S- SIDE VENT COVERS
$80.00 – $205.00
POLARIS RZR XP TURBO/ TURBO S- SIDE VENT COVERS

Made from 18ga steel

Comes with all necessary hardware. Drilling requiried

Add some bling to your XP Turbo while also protecting the frog skin

Can be bought as 2pc (outside only/Inside Only) or 4 pc(inside and outside)

Mesh will be black *

ONLY FIT ’17 and up models!
Select options This product has multiple variants. The options may be chosen on the product page
L&W Rear Inner Fender Mud Guard- PRO R
$55.00

FOR PRO R MODELS ONLY! (All Trims)

This Product is for the set (Driver & Passenger Side.)

Made from 18 Gauge Steel.

Comes with hardware needed for install.

Select options This product has multiple variants. The options may be chosen on the product page
PRO R 4 Seater Tree Kickers
$1,050.00 – $1,150.00

2022-CURRENT POLARIS RZR PRO R 4 SEAT TREE KICKERS

MADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
COMES RAW OR ANY POLARIS OEM COLOR
HEAVY DUTY THROUGH-FRAME HARDWARE MADE BY L&W FAB
NO DRILLING REQUIRED
**2PC DESIGN
DESIGNED FOR 74” MACHINES
KICKS OUT 9”

Hardware for complete set (1 driver and 1 passenger):
(6) plastic end caps for 1.75 x .120 tube
(16) SAE ½” flat washers
(8) ½” lock washers
(8) ½-13 THIN nylon insert locknut
(8) ½”-13 x 1” GR8 hex bolts
(8) 3/8-16 X 1” STAINLESS STEEL ALLEN HEAD BOLTS
(6) pro xp front frame PIN (L&W made)
(2) pro xp rear frame PIN (L&W made)

Select options This product has multiple variants. The options may be chosen on the product page
TURBO R 2 SEAT CAGE
$1,300.00 – $1,700.00

TURBO R 2 SEAT CAGE
Fits 2022-current Polaris TURBO R 2 SEATER
Cages are made from 1.75” DOM.
7” chop measured at B Pillar (Driver head)

–IMPORTANT CAGE INFORMATION

ALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.

-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.

Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.

Please allow 24 – 48hrs for an email response with your quote.

-ALSO PLEASE NOTE ALL SALES ARE FINAL.

-PICKUP INFORMATION

When placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.

Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.

Please indicate color of cage and roof, if you chose the powder coat option. (IF YOU CHOOSE A RAW CAGE, YOU MUST CHOOSE A RAW ROOF!)

We will not add options for lower windshield bar or intrusion bars.

Select options This product has multiple variants. The options may be chosen on the product page
1.5” BRAKE LINE CLAMPS
$45.00 – $80.00

1.5” BRAKE LINE CLAMPS

Made from 6061 billet aluminum

Clamps work with the following L&W Arms.

All Pro XP A arms

All Turbo S A arms

All long travel A arms

Also can be used on other arms where 1.5” OD tubing is used

Comes with stainless hardware

Select options This product has multiple variants. The options may be chosen on the product page
RZR XP- Long Travel Kit
$2,500.00 – $2,680.00

FITMENT:

2014–2023 RZR XP1000/XP TURBO.

Give your 64” RZR XP A wider, and more stable stance.

MADE OF DOMESTIC DOM (1.5X.120 WALL AND 1.25X.120 WALL)

Made from HRPO .250 sheet steel and 1.5×3–3/16 thick tubing

NO DRILLING REQUIRED

THIS KIT ONLY COMES WITH FORWARD A-ARMS

These take 17 and up model bushings.

If you have a 14-16 model, you will need to purchase bushings.

Only Steel Parts (A -Arms and Trailing Arms will come powder coated). Additional add on charge for powder coating radius rods is available.

Comes with everything needed except axles.

Requires Turbo S axles.

**NON TURBO MACHINES WILL NEED FRONT DIFF CHANGED TO ACCEPT A TURBO AXLE

** IF YOU ARE NOT RUNNING AN RS1 DIFF YOU WILL HAVE TO SPACE YOUR DIFF 1/8″ to keep the axles from hitting the frame.

Select options This product has multiple variants. The options may be chosen on the product page
PRO R Trailing Arms
$1,500.00 – $1,600.00

POLARIS PRO R HC Toe Delete TRAILING ARMS
Fitment: 2022- current Polaris Pro R.

Features A TOE LINK DELETE. These will do away with the toe link and replace it with a short,
adjustable lockout bar made by L&W.

Offers up to 5” of clearance over factory trailing arms.
Can still run factory offset wheels
Comes with new bolts for the new toe link delete.
Nothing else needed. Comes ready to bolt on!
Trailing arms are made Made from 3/16 and ¼” HRPO plate, and 1.75” x .250 wall tubing
Toe link delete bar made from 4140 steel and 304SS adjuster, utilizing a 3/4” heim.

Green toe link piece in featured photos comes standard BLACK!

Select options This product has multiple variants. The options may be chosen on the product page
TURBO R Trailing Arms
$1,500.00 – $1,600.00

POLARIS TURBO R HC Toe Delete TRAILING ARMS
Fitment: 2022- current Polaris Turbo R.

Features A TOE LINK DELETE. These will do away with the toe link and replace it with a short,
adjustable lockout bar made by L&W.
Offers up to 5” of clearance over factory trailing arms.
Can still run factory offset wheels
Comes with New bolts for the new toe link delete
Nothing else needed. Comes ready to bolt on!
Trailing arms are made Made from 3/16 and ¼” HRPO plate, and 1.75” x .250 wall tubing
Toe link delete bar made from 4140 steel and 304SS adjuster, utilizing a 3/4” heim.

Green toe link piece in featured photos comes standard BLACK!

Select options This product has multiple variants. The options may be chosen on the product page
Pro R/ Turbo R- Front Bumper
$325.00 – $375.00

FITMENT: 2022-CURRENT Pro R/Turbo R
Made from 11ga HRPO
Fits most winches up to 6k pounds
Factory bull bar and lower valance plastics are not used
Color options for bumper and overlays separate (mesh will always be black)
**must be used with L&W winch mount**

Select options This product has multiple variants. The options may be chosen on the product page
KRX Radius Rods
$230.00 – $675.00

Fitment:

2020-current Kawasaki KRX

Includes all spacers needed for install.

They are 6061 Aluminum, and made in the USA.

These Radius Rods hold a Lifetime Warranty.

Select options This product has multiple variants. The options may be chosen on the product page
PRO R 2 SEAT CAGE (2019-2024)
$1,200.00 – $1,700.00

PRO R 2 SEAT CAGE

FITMENT: 2022 up Polaris PRO R 2 seat all models

Made from 1.75 x .120 DOM

Comes standard with front grab handles

7” chop over head

–IMPORTANT CAGE INFORMATION

ALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.

-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.

Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.

Please allow 24 – 48hrs for an email response with your quote.

-ALSO PLEASE NOTE ALL SALES ARE FINAL.

-PICKUP INFORMATION

When placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.

Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.

Please indicate color of cage and roof, if you chose the powder coat option. (IF YOU CHOOSE A RAW CAGE, YOU MUST CHOOSE A RAW ROOF!)

We will not add options for lower windshield bar or intrusion bars.

Select options This product has multiple variants. The options may be chosen on the product page
PRO R- REAR SWAY BAR LINKS
$140.00

POLARIS RZR PRO R REAR SWAY BAR LINKS (ALL MODELS)

FITMENT:2022–CURRENT RZR PRO R ALL MODELS

Made from 6061 T6 billet aluminum

2x stronger than OEM

Adds to the look and strength of your machine

Comes as a pair (driver and passenger) along with all necessary spacers and hardware

Add to cart
31″ Light Bar
$65.00

LED Color Temperature: 6000K-6500K

Working Lifespan: over 30,000 hours

This light bar does not come with a warranty.

Add to cart
TURBO R 4 SEAT CAGE
$2,000.00 – $2,500.00

TURBO R 4 SEAT CAGE
Fits 2022-current Polaris TURBO R 4 SEATER/ 2 SEATER
Cages are made from 1.75” DOM.
7” chop measured at B Pillar (Driver head)

–IMPORTANT CAGE INFORMATION

ALL CAGES ORDERED THAT STATE “ON BACKORDER” ARE ANTICEAPATING A LEAD TIME OF 4-8 WEEKS ONCE PURCHASED TO BE COMPLETED, PLEASE ALSO NOTE THAT IF CHOOSING POWDER COAT IT COULD BE AN ADDITIONAL 2 WEEKS. THERE IS NO RUSH OPTION AVAILABLE ON BACKORDERED CAGES.

-IF YOU ARE NEEDING A CAGE SHIPPED, PLEASE SEND AN EMAIL TO Taylor@landwfab.com (mailto:Taylor@landwfab.com) for a shipping quote.

Please provide your full ship to address along with the cage SKU # you wish to purchase or the order number for your cage so that she can get you an accurate shipping cost.

Please allow 24 – 48hrs for an email response with your quote.

-ALSO PLEASE NOTE ALL SALES ARE FINAL.

-PICKUP INFORMATION

When placing an order that you plan to pick up, please put in the notes at checkout that it is local pick up. Once your cage is ready, we would reach out to you via email/ call to schedule a pickup date that works best for you.

Cage Includes aluminum roof and WILL ALWAYS COME STANDARD WITH FRONT GRAB HANDLES.

Please indicate color of cage and roof, if you chose the powder coat option. (IF YOU CHOOSE A RAW CAGE, YOU MUST CHOOSE A RAW ROOF!)

We will not add options for lower windshield bar or intrusion bars.

Select options This product has multiple variants. The options may be chosen on the product page
KRX Harness Bar
$175.00 – $205.00

KAWASAKI KRX 1000 SEATBELT HARNESS BAR

** THIS DOES NOT WORK WITH 4 SEATER KRX)**

A must have on the KRX to be able to run aftermarket harnesses.

Works on factory cage as well as our L&W cage

Bolts in using factory bolts

Does not work with click 6 harness.

Made from 3/16” plate and 1–3/4” DOM

Select options This product has multiple variants. The options may be chosen on the product page
Race Style A-Arms 1.75 FORWARD w/adjustable uppers)-TURBO S
$925.00 – $1,025.00

Race Style A-Arms (1.75 FORWARD w/adjustable uppers))- (Turbo S)

This is for the STANDARD BALL JOINT.

BUILT TO ORDER

These A Arms are 1 1/2 – .120 wall with extra bracing on the arms.

You can reuse your stock A-Arm bushings and Ball Joints.

This listing is for Turbo S models only.

Select options This product has multiple variants. The options may be chosen on the product page
2021 Ranger Forward A Arms with Adjustable Uppers
$600.00 – $650.00

This set of Front A-Arms have adjustable uppers.

The adjustment is in the uppers only, the lowers are direct bolt.

These A-Arms are 1.75″ Forward. The adjustable pins have a 1 inch diameter.

These are only offered raw or powder coated black.

Select options This product has multiple variants. The options may be chosen on the product page
1K/Turbo- Full Suspension Kit
$2,215.00 – $2,350.00

This Kit fits the 1K/TURBO Models ONLY.

This full suspension kit includes:

Steel HD Trailing Arms. – https://landwfab.com/product/1k-turbo-rs1-steel-hd-trailing-arms/

Radius Rods- FULL KIT –https://landwfab.com/product/direct-bolt-radius-rods/

Tie Rods- The default tie rod for this kit is the factory style HD WARRANTIED ENDS. https://landwfab.com/product/factory-style-tie-rods/

Rear Sway Bar Links- https://landwfab.com/product/sway-bar-links/

A Arms- FULL KIT https://landwfab.com/product/1k-turbo-high-clearance-a-arms/

(PLEASE NOTE WHEN CHOOSING A POWDER COAT COLOR OPTION THAT ONLY THE STEEL PARTS (A-ARMS and TRAILING ARMS) WILL BE POWDER COATED THAT COLOR, THE OTHER ALUMINUM ITEMS (TIE RODS, RADIUS RODS and SWAY BARS) WOULD BE RAW BILLET ALUMINUM-unless upgraded to powder coat radius rods below.)

Select options This product has multiple variants. The options may be chosen on the product page
Can-Am X3 Tie Rods 72″
$210.00

Fitment: Can-Am X3 72″ models ONLY. (2017 and UP)

This listing is for a SET.

Tie Rods are made from 6061 Aluminum and have a billet finish

Does not come with inner rod ends!

Add to cart
PRO XP- Full Suspension Kit
$2,300.00 – $2,450.00

This kit is for PRO XP Models ONLY.

Please see “additional info” below for what all products this full suspension kit includes

(PLEASE NOTE WHEN CHOOSING A POWDER COAT COLOR OPTION THAT ONLY THE STEEL PARTS (A-ARMS and TRAILING ARMS) WILL BE POWDER COATED THAT COLOR, THE OTHER ALUMINUM ITEMS (TIE RODS, RADIUS RODS and SWAY BAR LINKS) WOULD COME RAW BILLET ALUMINUM- unless upgraded to powder coated radius rods below.)

Select options This product has multiple variants. The options may be chosen on the product page