1K/Turbo Tie Rods – Factory Style
$189.00 – $325.00
These Tie Rods Fit Polaris RZR 1000 and Turbo
2014-2024 models
Specs on the Rods:
These are factory style ball and socket tie rods.
This listing is for a SET
6061 Aluminum.
Made in America
Lifetime Warranty on rod itself.
Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end)
To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. 2016 Turbo will always be M14
Factory ends are not warrantied, only the tie rod itself.
Specs for HD Rebuild-able Tie Rod Ends:
Fully rebuildable
Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished
100 percent made in USA
This product holds an 18 month warranty
Options:
1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)
2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)
https://landwfab.com/product-category/rzr-parts/tie-rods/
https://www.facebook.com/landwfab/
These Tie Rods Fit Polaris RZR 1000 and Turbo
2014-2024 models
Specs on the Rods:
These are factory style ball and socket style.
This listing is for a SET
6061 Aluminum.
Made in America
Lifetime Warranty on rod itself.
Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end)
To determine whether you have M14 or M16, please measure the ends of your factory rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. **2016 Turbo will always be M14**
Factory ends are not warrantied, only the tie rod itself.
Specs for HD Rebuild-able Tie Rod Ends:
Fully rebuildable
Comes assembled with grease ready for installation Compatible with all L&W rods plus many others Starts with heat treated 4140 Black oxide finished
100 percent made in USA
This product holds an 18 month warranty
Options:
1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)
2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)
Weight | 3 lbs |
---|---|
Dimensions | 28 × 4 × 4 in |
Model | M14 (Factory Style/ Non-Warrantied Ends), M14 (HD Rebuildable Ends / 18 Month Warranty on Ends), M16 (Factory Style/ Non-Warrantied Ends), M16 (HD Rebuildable Ends / 18 Month Warranty on Ends) |
Color | Black, Raw |
Related products
-
PRO XP- 2 Seater Tree Kickers
$580.00 – $640.00Select optionsThis listing is for a set (driver and passenger) of 2 seater tree kickers.
2020-CURRENT POLARIS RZR PRO XP 2 SEAT (ALL MODELS) TREE KICKERS
DESIGNED FOR 64″ MACHINESMADE OF DOMESTIC DOM (1.75X.120 WALL AND 1.5X.120 WALL)
PROVIDES PROTECTION OF LOWER PLASTICS AND FRAME
COMES RAW OR ANY POLARIS OEM COLOR
HEAVY DUTY THROUGH-FRAME HARDWARE MADE BY L&W FAB
NO DRILLING REQUIRED.COMES STANDARD WITH BLACK PLASTIC END CAPS
American Made.
Installation Instructions: https://landwfab.com/wp-content/uploads/2021/11/pro-2-seat-instructions.pdf
-
1K/Turbo Rear Bumper (2019-2023)
$400.00 – $445.00Select optionsThis listing is for 1K/TURBO models only.
This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install.
Made from 1.75 x .120 Wall Steel
CHECK OUT our Additional Bumper Add Ons and Upgrades Below!