Category: RZR Tie Rods

RZR Tie Rods

These tie rods are Georgia made and hold a lifetime warranty. 
Clevis styles and Factory Style are the current two options available. 
6061 Aluminum. 
Billet Finish 
More information is within each listing. 
We will be happy to assist you with any questions regarding these tie rods and which one will work best for you and your application. 

Showing all 12 results

  • 1K/Turbo Tie Rods – Factory Style

    $189.00$325.00

    These Tie Rods Fit Polaris RZR 1000 and Turbo

    2014-2024 models

    Specs on the Rods:

    These are factory style ball and socket tie rods. 

    This listing is for a SET

    6061 Aluminum. 

    Made in America

    Lifetime Warranty on rod itself.

    Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end) 

    To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. **2016 Turbo will always be M14**

     

    Factory ends are not warrantied, only the tie rod itself. 

     

    Specs for HD Rebuild-able Tie Rod Ends:

    Fully rebuildable

    Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

    100 percent made in USA

    This product holds an 18 month warranty

    Options:

    1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)

    2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)

    https://landwfab.com/product-category/rzr-parts/tie-rods/

    https://www.facebook.com/landwfab/

     

    Select options
  • Heim Replacements

    $18.00$25.00

    This Listing is for 5/8 & 3/4 Heims.

    These are replacement Heims only, they do not carry any warranty as they are considered a wear part.

    We recommend keeping them greased with a non water based lubricant for a longer lasting use. 

    WE OFFER BOTH LEFT AND RIGHT HAND THREADS.

    PLEASE READ FITMENT BELOW IF NEEDING TO KNOW WHICH THREAD TO PURCHASE FOR L&W PRODUCTS.

    Select options
  • 1K/Turbo -Spindle End for Tie Rods

    $20.00$40.00

    This is a REPLACEMENT spindle end for tie rods. 

    If you have just purchased our tie rods, the spindle end will come with them. 

    This is just a replacement piece. 

    Select options
  • Clevis Style Tie Rods (1K/Turbo)

    $215.00

    These are clevis style tie rods (heavy duty).

    This listing is for a SET

    Tie Rod ends are not consistent across all models or years. Please make sure to measure the rack end of stock tie rods to be sure of which size you need.

    To determine what size you need, please measure the end of your tie rod that screws into the rack, if the measurement is less the 1/2″ you will need M14, if it is more then 1/2″ you will need M16.

    These tie rods are made to work well for a racing style application. 

    6061 Aluminum. 

    Made in America

    Life Warranty. 

    Ends are not warrantied, only the tie rod itself. 

     

    Select options
  • Turbo S Tie Rods

    $300.00

    Turbo S Tie Rods: 

    This listing is for a SET

    Comes with spindle ends.

    6061 Aluminum. 

    Made in America

    Lifetime Warranty on the Tie Rod itself.

    Factory ends are not warrantied, only the tie rod itself. 

     

    Specs for HD Rebuild-able Tie Rod Ends:

    Fully rebuild-able

    Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

    100 percent made in USA

    This product holds an 18 month warranty

    Select options
  • PRO XP Tie Rods

    $189.00$325.00

    These tie rods are for the Pro XP.

    They have a lifetime warranty. 

    Factory ends are not warrantied, only the tie rod itself. 

    *PLEASE NOTE: If running 14″ wheels, the tie rod will make contact with the wheel at full turn. You can avoid this by running a wheel spacer or a steering stop. 

    Specs for HD Rebuild-able Tie Rod Ends:

    Fully rebuild-able

    Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

    100 percent made in USA

    This product holds an 18 month warranty

     

    https://www.facebook.com/landwfab/

    Select options
  • Replacement Tie Rod Ends.

    $18.00$135.00

    (1000 / Turbo /Turbo S/ PRO XP / RS1 Models)

    This is a replacement for our factory style tie rod ends.

    Please see product photos for warranty information 

     

    To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. 2016 Turbo will always be M14/ PRO XP is M16

    Select options
  • Turbo S/Pro XP- Spindle End Replacement

    $20.00$40.00

    This is a replacement spindle end for Turbo S AND Pro XP tie rods.

    If you have just purchased our tie rods, the spindle end will come with them. 

    This is just a replacement piece. 

    Select options
  • Clevis Style Tie Rods for Turbo S

    $240.00

    These are clevis style tie rods (heavy duty).

    This listing is for a SET

    These tie rods are made to work well for a racing style application. 

    6061 Aluminum. 

    Made in America

    Life Warranty. 

    Ends are not warrantied, only the tie rod itself. 

     

    Add to cart
  • Clevis Tie Rod ENDS 1000/Turbo

    $45.00$90.00

    These are the ENDS ONLY

    These only fit 1000/ Turbo models

    Select options
  • 900S /1000S Tie Rods

    $189.00$295.00

    This listing is for 900 S / 1000 S Tie Rods

    These are for the S models ONLY

    They are made out of 6061 Aluminum. 

    They have a billet finish. 

     Made in America. 

    Lifetime Warranty on the rods. 

     

    Factory ends are not warrantied, only the tie rod itself. 

     

    Specs for HD Rebuild-able Tie Rod Ends:

    Fully rebuild-able

    Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

    100 percent made in USA

    This product holds an 18 month warranty

    Select options
  • Turbo S Clevis Tie Rod ENDS

    $45.00$90.00

    These are the ENDS ONLY

    These only fit Turbo S Models

    Select options

Click here to assign a widget for this area.