0$0.00

No products in the cart.

Category: RZR Turbo

RZR Turbo

Showing 1–40 of 44 results

  • Seat Lowering Bases

    $80.00$125.00
    INTRODUCING THE  L&W SEAT LOWERING BASE! 
     
    -Easier to Install
    -Uses Stock Slider
    -Slider Plate integrated
    -Harness 5th Point Mount
    -Lowers 2”
    -Reclines 5.2 degrees
    • Powder Coated Black 
    • HARDWARE KIT IS INCLUDED, you do not need to purchase it separately.
    • There are pieces you need from the original seat base. 
    • Works with MOST aftermarket seats. (L&W is not responsible for fitment issues when using aftermarket seats)
    • ALSO please note that since these recline the seat 5.2 degrees you will not be able to slide the seat all the way back, causing you to lose some leg room. 
     
    Select options
  • 1K/TURBO/RS1- Rear Radius Rods

    $240.00$465.00

    THIS LISTING IS FOR 1K/TURBO/RS1 MODELS ONLY. 

    The lowers are High clearance and always come Direct Bolt.

    The Direct Bolt Uppers come with no adjustment as they are direct fit. 

    The 1 Heim Uppers come with a Right hand heim on one end of each rod for adjustability if needed. 

    The 2 Heim Uppers come with both a Left and Right Hand heim on each end of the rod for adjustability if needed. 

    *Adjustable uppers are usually necessary to correct any camber issues that you may have or experience on your machine.  Most times if you plan to change tender springs, or if you are running a bigger set up (portals, lifts, changing ride height most times will cause +/- camber that you will need to correct with adjustable uppers.) 

    Includes all misalignment spacers needed for install. 

    They are 6061 Aluminum, and made in the USA. 

    These Radius Rods hold a Lifetime Warranty.

     

     

    Select options
  • 1K/Turbo Tie Rods – Factory Style

    $189.00$290.00

    These Tie Rods Fit Polaris RZR 1000 and Turbo

    Specs on the Rods:

    These are factory style ball and socket tie rods. 

    This listing is for a SET

    6061 Aluminum. 

    Made in America

    Lifetime Warranty on rod itself.

    Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end) 

    To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. **2016 Turbo will always be M14**

     

    Factory ends are not warrantied, only the tie rod itself. 

     

    Specs for HD Rebuild-able Tie Rod Ends:

    Fully rebuildable

    Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

    100 percent made in USA

    This product holds an 18 month warranty

    Options:

    1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)

    2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)

    https://landwfab.com/product-category/rzr-parts/tie-rods/

    https://www.facebook.com/landwfab/

     

    Select options
  • High Clearance A Arms 1K/Turbo (2017- Current Models)

    $300.00$725.00

    These High Clearance A Arms are raw material.

    1 1/4 tubing .120 wall DOM. 

    L and W offers a life time warranty on bending and breaking the A arms. 

    DOES NOT COME TAPPED FOR GREASE FITTINGS. 

    Please select raw in the color options if you do not want powder coating. 

    These now take 17 and up model bushings.

    If you have a 14-16 model, you will need to purchase 17 & up model bushings.

    Bushing Sold Separately. Please see link in description for bushings.

     

    Select options
  • Aftermarket Mount Plate for Milwaukee Packout

    $120.00

    Milwaukee Packout mount plate:

    Works with all Polaris RZR XP1000/Turbo, Turbo S. Also works with Highlifter editions.

    Made with 10ga HRPO steel.
    Easily installed/removed with no tools using the supplied hardware.
    Mount is slotted for different configurations of boxes to maximize trunk room for coolers.
    Most coolers under 26qt will still fit.

    Add to cart
  • Radius Plate- 1K/TURBO/RS1

    $115.00$140.00

    This radius plate has a lifetime warranty.

    Made from 6061 Aluminum.

    We make this product in Temple, Ga. 

    1K/ Turbo/ RS1

    DOES NOT WORK WITH FACTORY BUMPER.

    https://landwfab.com/product-category/rzr-parts/radius-rods/

    https://www.facebook.com/landwfab/

    Select options
  • Clevis Style Tie Rods (1K/Turbo)

    $189.00

    These are clevis style tie rods (heavy duty).

    This listing is for a SET

    Tie Rod ends are not consistent across all models or years. Please make sure to measure the rack end of stock tie rods to be sure of which size you need.

    To determine what size you need, please measure the end of your tie rod that screws into the rack, if the measurement is less the 1/2″ you will need M14, if it is more then 1/2″ you will need M16.

    These tie rods are made to work well for a racing style application. 

    6061 Aluminum. 

    Made in America

    Life Warranty. 

    Ends are not warrantied, only the tie rod itself. 

     

    Select options
  • 1.75″ Forward 1K/Turbo High Clearance A Arms (Full Kit)

    $625.00$725.00

    L and W offers a life time warranty on bending and breaking the A arms.

    Will NOT work with 6+1 or 5+2 Offset Wheels, UNLESS you are running either a steering stop or 1inch wheel spacers. 

    DOES NOT COME TAPPED FOR GREASE FITTINGS

    Please select raw in the color options if you do not want powder coating.

    These now take 17 and up model bushings.

    If you have a 14-16 model, you will need to purchase 17 & up model bushings.

    Bushing Sold Separately. Please see link in description for bushings.

    PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING

    Select options
  • 1K/TURBO- Race Style Winch Bumper (19-Current)

    $300.00$350.00

    This listing is for 1K/TURBO models only.

    (19-Current models)

    This bumper comes with all mounting winch plates and hardware needed to install.

    (DOES NOT INCLUDE FAIRLEAD)

    Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)

    Wide Spool Winches DO Fit In This Bumper

    These bumpers use a 6 inch fairlead.

     

    Select options
  • Spindle End for Tie Rods

    $20.00$30.00

    This is a REPLACEMENT spindle end for tie rods. 

    If you have just purchased our tie rods, the spindle end will come with them. 

    This is just a replacement piece. 

    Select options
  • Tree Kicker Bolt Kit

    $40.00$85.00

    This tree kicker bolt kit is for 2 or 4 seater L&W tree kickers. 

    (1K/TURBO/TURBO-S) 2 seater set comes with 4 L bolts.

    (1K/TURBO/TURBO-S) 4 seater set comes with 6 L bolts.

    (PRO XP) 2 seater set comes with 6 frame pins. 

    (PRO XP) 4 seater set comes with 8 frame pins.

    This is just a replacement kit. 

    For new tree kickers, click the link below. 

     

    If you are looking for new tree kickers please click here- https://landwfab.com/?s=TREE+KICKERS&product_cat=0&post_type=product

    http://facebook.com/landwfab

    Select options
  • Sway Bar Links

    $100.00

    PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING

     

    Made of 6061

    Add to cart
  • Keller Ball Joint

    $130.00$510.00

    If you are needing ball joints for a full set (4) of A Arms, please choose a set of 4. 

    If you are needing them for Uppers, choose a set of 2. 

    If you are needing them for Lowers, choose a set of 2.

     

    The Mega Ball Joints are used for our mega ball joint a arms. The will not fit a regular a arm.

    These ball joints are for rzr only. They do not fit a general. 

     These ball joints have a hardened body and stem. Stem is built from AMERICAN made 4340 and hardened for maximum strength and wear resistance. Adjustable and greasable with a replaceable boot.

    Select options
  • Cooler Mount for 1k/ Turbo

    $100.00

    Cooler Mounts:

    Fits a 1K/Turbo (For Turbo S, please see Turbo S Listing)

    1. Works with All RZR XP including highlifter edition
    2. Uses eye bolt Grip mount
    3. All hardware included
    4. Made from 3/16 HRPO
    5. Fully adjustable to fit over 30 different cooler models including these top models:
       i) YETI Tundra 35
      ii) RTIC 20
      iii) YETI 20
      iv) Ozark 26
      v) NICE 26

    IS NOT COMPATIBLE WITH POLARIS OR PELICAN COOLERS.
    6. Comes powder coated black

     

    [video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/RZR-XP-TURBO-COOLER-MOUNT.mp4"][/video]
    Add to cart
  • 1K/Turbo- 2 Seater Tree Kickers

    $475.00$525.00

    This listing is for a set (driver and passenger) of 2 seater tree kickers.

    Model fitment: 1K/Turbo

    American Made. 

    Select options
  • 1K/Turbo Rear Bumper (2019-Current)

    $350.00$400.00

    This listing is for 1K/TURBO models only.

    This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. 

    Made from 1.75 x .120 Wall Steel

    CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

    Select options
  • 1K/TURBO- 2019 to Current Front Winch Bumper

    $450.00$500.00

    This listing is for 19-CURRENT 1K/TURBO MODELS ONLY.

    This bumper comes with all mounting winch plates and hardware needed to install.

    (DOES NOT INCLUDE FAIRLEAD)

    Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)

    Wide Spool Winches DO Fit In This Bumper

    These bumpers use a 6 inch fairlead. 

     

    WITH BROW: LOOPS AROUND HEADLIGHTS

    NO BROW: UNDER HEADLIGHTS

     

    Select options
  • L&W Sak- It Scrap Sak

    $38.00

    These are the Sak-It Brand Scrap Sak’s with our L&W Logo.

    You can only get these here at landwfab.com

    Don’t leave your trash junking up your ride, when you can Sak-It!

    Add to cart
  • Reverse Light

    $85.00$110.00

    This Reverse Light will work with: Turbo S models 2018-2020 and 1k/Turbo Models 2019-2020.

    It comes with 12ft. of wire 

    5/10 rocker switch with fuse and relay 

    Select options
  • 1K/Turbo Front Bumper (2019-Current)

    $350.00$400.00

    1K/Turbo Front Bumper (2019-Current)

    This Bumper is a non-winch bumper that is designed to fit a 1K or Turbo Polaris RZR.
    It is specific to 2019-current models.

    It comes with all hardware needed.

    Select options
  • Aftermarket Snap In Grill

    $160.00

    Options for outline color and L&W logo

    The grill mesh will always be black

     

    Fitment:

    Turbo S

    19-current models 1K/Turbo

    *NOTE: THIS GRILL WILL NOT WORK WITH THE FACTORY POLARIS BUMPER WITHOUT MAKING SLIGHT MODIFICATIONS TO FIT.*

    Select options
  • Exhaust Cover for RZR Turbo/Turbo S

    $100.00

    Specifications on Exhaust Cover for RZR:

    It is made from 18 gauge steel.

    No modifications are required to the machine

    Works with factory and slip on exhausts

    Does Not Work with Aftermarket Head Pipe

    Fitment:

    2018-Current XP Turbo

    2018- Current Turbo S

    Does not fit a 1000 model

    For exhausts please click the link below:

    https://landwfab.com/product-category/trinity-racing-products/mufflers/

    Select options
  • 4 Seater Tree Kickers-1K/TURBO

    $700.00$775.00

    This listing is for a set (driver and passenger) of 4 seater tree kickers.

    Model fitment: 1K/Turbo

    American Made. 

    Select options
  • Full Windshields for L&W Cages

    $260.00$300.00

    These windshields are made to fit L&W Production cages ONLY!

    Windshields are made from 3/16 polycarbonate with MARGARD coating.

    The maragard coating makes it scratch resistant. (Resistant not proof)

    Comes complete with all hardware for easy installation

    Made in the USA

    Select options
  • (MEGA) 1.75″ Forward High Clearance A Arms- 1K/TURBO

    $625.00$725.00

    THIS LISTING IS FOR A FULL KIT.

    L and W offers a life time warranty on bending and breaking the A arms.

    These A Arms are constructed for Mega Ball Joints ONLY. 

    Will NOT work with 6+1 or 5+2 Offset Wheels.

    Please select raw in the color options if you do not want powder coating.

    Our A Arms now require 17+ model bushings.

    If you have a 14-16 you will need to purchase the bushing kit for the 17+ model. 

    Bushing Sold Separately. Please see link in description for bushings.

    PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING

    Select options
  • Gordon Cage- 1K/Turbo/Turbo S- 4 Seater

    $2,000.00

    Gordon Standard is a 6″ Chop

    Gordon Low is a 8″ Chop

    If you would like to purchase a windshield to fit this cage please click here!

     

    Currently we are only shipping cages RAW. Powder Coated options are pick up only.

    • Price includes Aluminum Roof.
    • Cage DOES NOT come standard with grab bars or intrusion bars. Those must be added for an additional charge.
    • Please allow 1-3 business days for add ons and 10-15 business days for powder coating.
    • Please indicate color of cage and roof, if you chose the powder coat option.

    (See shipping details in Additional Info below!)

    Select options
  • Seat lowering Base Hardware Kit

    $15.00$30.00

    This Listing is for a SET for TWO seat lowering base hardware kits or for a SINGLE seat base.

    This is not required with the purchase of a new set of bases. 

    This is only a replacement kit. 

    This hardware kit is a replacement for RZR as well as General seat lowering bases. 

    Select options
  • Aftermarket Snap In Grill with Light Bar

    $185.00

    Comes with Light Bar (does not include wiring harness)

    Options for outline color and L&W logo

    The grill mesh will always be black

     

    Fitment:

    Turbo S

    19-current models 1K/Turbo

    *NOTE: THIS GRILL WILL NOT WORK WITH THE FACTORY POLARIS BUMPER WITHOUT MAKING SLIGHT MODIFICATIONS TO FIT.*

    Select options
  • End Caps for Bumpers/Tree Kickers

    $12.00$20.00

    These are plastic replacement end caps for L&W bumpers and tree kickers. 

    Select options
  • 1K/Turbo/Turbo S- 2 Seater Cage

    $1,150.00$1,350.00

    Cages are made out of .120 DOM – 1.75″ in diameter.

    These cages are shipped LTL and carry an additional shipping charge. (By purchasing this listing, you are agreeing to pay any and all shipping charges which are additional and are not included in the price on this listing. Shipping can range anywhere from $600-$1500 per cage. Up to date charges for specific destination will be charged. You will be contacted within 24 hours of purchase to arrange shipping quote and payment.)

    Cage Includes aluminum roof

    Currently we are only shipping cages RAW. Powder Coated options are pick up only.

    Cage DOES NOT come standard with grab bars. Those must be added for an additional charge.

    Please allow 1-3 business days for add ons and 7-10 business days for powder coating.

    Please indicate color of cage and roof, if you chose the powder coat option.

    Select options
  • Clevis Tie Rod ENDS 1000/Turbo

    $45.00$90.00

    These are the ENDS ONLY

    These only fit 1000/ Turbo models

    Select options
  • 1K/Turbo-Rear Bumper (14-18 Model)

    $350.00$400.00

    This Listing is for 1k/turbo 14-18 Model only!
    It WILL NOT fit a 2019-up model rzr. 

    This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. Made from 1.75 x .120 Wall Steel

     CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

    Select options
  • Receiver Hitch Plate for Factory Replacement

    $145.00

    This receiver hitch plate is for anyone that isn’t planning on running a bumper, or is running bumper that requires the use of a factory shaped radius rod plate. 

    It is just a direct replacement of the factory radius rod plate with an added receiver hitch.

    This only comes in black.

    Material Specs:

    1/4″ thick HRPO steel. 

    Receiver protrusion for all variations is 5-15/16″

    All variations accepts standard 2″ receiver with 5/8″ pin

    Select options
  • 1K/TURBO- Receiver Hitch Plate for L&W Bumper

    $145.00

    This is a replacement for the steel or billet radius plates that are used in correspondence with an L&W Bumper.

    They come in black only.

    Material Specs:

    1/4″ thick HRPO steel. 

    Receiver protrusion for all variations is 5-15/16″

    All variations accepts standard 2″ receiver with 5/8″ pin

    Select options
  • Race Style REAR Bumper (2019-Current)

    $325.00$375.00

    This listing is for 1K/TURBO models only.

    This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. 

    Made from 1.75 x .120 Wall Steel

    CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

     

     

     

    Select options
  • 1K/Turbo/RS1- Steel HD Trailing Arms

    $825.00$875.00

    FITMENT: 1K/TURBO/RS1

    These Steel HD Trailing Arms are built from 1″ 1/2 x 3 3/16 Rectangle Tubing.

    You may choose the color of the Trailing arm itself, however the brake line logo bracket comes powder coated black. 

    These trailing arms hold a lifetime warranty. 

    They are not under warranty for racing applications, and there is no warranty on wear parts. (Uniball/Misalignments). 

    Select options
  • Receiver Hitch Add On Plate

    $145.00

    This is the receiver hitch for anyone that currently has an L and W radius rod plate steel/billet that wants to add a receiver hitch. 

    It can be used with our bumpers as well.  

    Only comes in black.

    Material Specs:

    1/4″ thick HRPO steel. 

    Receiver protrution for all variations is 5-15/16″

    All variations accepts standard 2″ receiver with 5/8″ pin

    Add to cart
  • Mega Ball Joint A Arms-Standard (1K/Turbo)

    $625.00$725.00

    These A Arms are constructed for Mega Ball Joints ONLY. 

    These High Clearance A Arms are raw material.

    1 1/4 tubing .120 wall DOM.

    L and W offers a life time warranty on bending and breaking the A arms. 

    DOES NOT COME TAPPED FOR GREASE FITTINGS. 

    Please select raw in the color options if you do not want powder coating. 

    These now take 17 and up model bushings.

    If you have a 14-16 model, you will need to purchase 17 & up model bushings.

    Select options
  • 1K/Turbo- Full Suspension Kit

    $2,095.00$2,220.00

    This Kit fits the 1K/TURBO Models ONLY.

    This full suspension kit includes: 

    Steel HD Trailing Arms.  – https://landwfab.com/product/1k-turbo-rs1-steel-hd-trailing-arms/

    Radius Rods- FULL KIT –https://landwfab.com/product/direct-bolt-radius-rods/

    Tie Rods- The default tie rod for this kit is the factory style HD WARRANTIED ENDS.  https://landwfab.com/product/factory-style-tie-rods/

    Rear Sway Bar Links- https://landwfab.com/product/sway-bar-links/

    A Arms- FULL KIT https://landwfab.com/product/1k-turbo-high-clearance-a-arms/

    (PLEASE NOTE WHEN CHOOSING A POWDER COAT COLOR OPTION THAT ONLY THE STEEL PARTS (A-ARMS and TRAILING ARMS) WILL BE POWDER COATED THAT COLOR, THE OTHER ALUMINUM ITEMS (TIE RODS, RADIUS RODS and SWAY BARS) WOULD BE RAW BILLET ALUMINUM-unless upgraded to powder coat radius rods below.)

    Select options