- Newest Products
- Bumpers with Shipping
- Can Am
- 900 S/ 1000 S
- A Arms
- Ball Joints
- Brake Line Clamps
- Bumpers for Polaris RZR
- Drink Holder
- Full Suspension Kit
- PRO XP
- RZR 1000
- RZR RADIUS RODS
- RZR Radius Rods
- RZR Tie Rods
- RZR Turbo
- Seat Lowering Base
- Skid Plate
- Sway Bar Links
- Trailing Arms
- tree kickers
- Turbo S
- Tree Kicker Shipping
- Trinity Racing Products
- Wheels and Tires
1K/ Turbo 2019-Current Polaris Race Style Winch Bumper
$250.00 – $300.00
These bumpers will fit a 2019-Current Turbo, Turbo S, and 1000 Polaris RZR
These bumpers will fit a 2019-Current, Turbo, Turbo S and 1000 Polaris RZR
|Dimensions||33 × 16 × 12 in|
19 Rust Orange, Cadillac Grey, Ghost Grey, Kingsport Grey, Matte Navy, Matte Sands Metallic, Sky Blue, Stealth Grey, Velocity Blue, Black, Lime Squeeze, Orange, Raw, Red, Silver, White
Tie Rods – Factory Style$189.00 – $339.99Select options
These Tie Rods Fit Polaris RZR 1000 and Turbo
Specs on the Rods:
These are factory style ball and socket tie rods.
This listing is for a SET
Made in America
Lifetime Warranty on rod itself.
Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end)
To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. **2016 Turbo will always be M14**
Factory ends are not warrantied, only the tie rod itself.
Specs for HD Rebuild-able Tie Rod Ends:
Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished
100 percent made in USA
This product holds an 18 month warranty
1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)
2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)
Direct Bolt Radius Rods (1K/Turbo)$225.00 – $489.00Select options
PLEASE ALLOW 7-10 DAYS on BACK-ORDER PRODUCTS or POWDER COATING
Includes all spacers needed for install.
Does not include radius plate, to purchase radius plate click here
These radius rods are direct bolt and non- adjustable.
Small Bolt 10mm are used for Models 2014 to mid 2017
Big Bolt 12mm began being used in mid 2017
If your year model fall in the mid 2017 range, you can determine your bolt size by the socket size. If the socket is 15mm, then you will need a 10mm bolt. If it is a 18mm, then you will need the 12mm bolt.
Made from 6061 Aluminum.