0$0.00

No products in the cart.

Category: Bumpers for Polaris RZR

Bumpers for Polaris RZR

L&W offers a wide variety of bumper for many different Polaris RZR models. Ranging from full size, to race style, as well as winch bumper options.

Full Size bumpers are also available with or without “brow” (the loop around the lights)

The Bumpers are made from 1.75 .120 Wall

All Bumpers come with the hardware needed to run that particular bumper.

Bumpers are available for 1000/ Turbo / Turbo S models. We currently do not offer a bumper for the PRO XP.

Powder Coated Options are available in the OEM colors for that particular model. If you have a new model featuring a new color, it may take several months before we offer that particular color once it has been release by Polaris.

Please note that this selection is bumpers for Polaris RZR models and is not for Ranger, General, Honda models, or any other brand.

Showing all 19 results
Sort by popularity

Showing all 19 results

  • 1K/TURBO- Race Style Winch Bumper (19-Current)

    $300.00$350.00

    This listing is for 1K/TURBO models only.

    (19-Current models)

    This bumper comes with all mounting winch plates and hardware needed to install.

    (DOES NOT INCLUDE FAIRLEAD)

    Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)

    Wide Spool Winches DO Fit In This Bumper

    These bumpers use a 6 inch fairlead.

     

    Select options
  • 1K/Turbo Rear Bumper (2019-Current)

    $350.00$400.00

    This listing is for 1K/TURBO models only.

    This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. 

    Made from 1.75 x .120 Wall Steel

    CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

    Select options
  • 1K/TURBO- 2019 to Current Front Winch Bumper

    $450.00$500.00

    This listing is for 19-CURRENT 1K/TURBO MODELS ONLY.

    This bumper comes with all mounting winch plates and hardware needed to install.

    (DOES NOT INCLUDE FAIRLEAD)

    Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)

    Wide Spool Winches DO Fit In This Bumper

    These bumpers use a 6 inch fairlead. 

     

    WITH BROW: LOOPS AROUND HEADLIGHTS

    NO BROW: UNDER HEADLIGHTS

     

    Select options
  • 1K/Turbo Front Bumper (2019-Current)

    $350.00$400.00

    1K/Turbo Front Bumper (2019-Current)

    This Bumper is a non-winch bumper that is designed to fit a 1K or Turbo Polaris RZR.
    It is specific to 2019-current models.

    It comes with all hardware needed.

    Select options
  • TURBO S- Front Winch Bumper

    $465.00$515.00

    This listing is for Turbo S models only.

     

    This bumper comes with all mounting winch plates and hardware needed to install.

    (DOES NOT INCLUDE FAIRLEAD)

    Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)

    Wide Spool Winches DO Fit In This Bumper

    These bumpers use a 6 inch fairlead. 

     

    WITH BROW: LOOPS AROUND HEADLIGHTS

    NO BROW: UNDER HEADLIGHTS

    Select options
  • TURBO S- Race Style Winch Bumper

    $300.00$350.00

    This listing is for Turbo S models only.

    This bumper comes with all mounting winch plates and hardware needed to install.

    (DOES NOT INCLUDE FAIRLEAD)

    Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)

    Wide Spool Winches DO Fit In This Bumper

    These bumpers use a 6 inch fairlead.

    Select options
  • Turbo S- Rear Bumper (18-Current)

    $350.00$400.00

    This listing is for Turbo S models only.

    This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. 

    Made from 1.75 x .120 Wall Steel

    CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

    Select options
  • End Caps for Bumpers/Tree Kickers

    $12.00$20.00

    These are plastic replacement end caps for L&W bumpers and tree kickers. 

    Select options
  • 1K/Turbo-Rear Bumper (14-18 Model)

    $350.00$400.00

    This Listing is for 1k/turbo 14-18 Model only!
    It WILL NOT fit a 2019-up model rzr. 

    This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. Made from 1.75 x .120 Wall Steel

     CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

    Select options
  • Race Style REAR Bumper (2019-Current)

    $325.00$375.00

    This listing is for 1K/TURBO models only.

    This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. 

    Made from 1.75 x .120 Wall Steel

    CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

     

     

     

    Select options
  • 1K/TURBO- Receiver Hitch Plate for L&W Bumper

    $90.00

    This is a replacement for the steel or billet radius plates that are used in correspondence with an L&W Bumper.

    They come in black only.

    Material Specs:

    1/4″ thick HRPO steel. 

    Receiver protrusion for all variations is 5-15/16″

    All variations accepts standard 2″ receiver with 5/8″ pin

    Select options
  • Receiver Hitch Plate for Factory Replacement

    $90.00

    This receiver hitch plate is for anyone that isn’t planning on running a bumper, or is running bumper that requires the use of a factory shaped radius rod plate. 

    It is just a direct replacement of the factory radius rod plate with an added receiver hitch.

    This only comes in black.

    Material Specs:

    1/4″ thick HRPO steel. 

    Receiver protrusion for all variations is 5-15/16″

    All variations accepts standard 2″ receiver with 5/8″ pin

    Select options
  • 6” Aluminum Fairlead

    $50.00

    6 inch fairlead.

    Comes with the hardware pictured.

    Compatible with L&W bumpers.

    Also compatible with all bumpers with 6″ mounting holes or any winch mount requiring a 6″ mount fairlead. 

    Made out of 6061 aluminum

    1 inch thick. 

    Add to cart
  • Receiver Hitch Add On Plate

    $90.00

    This is the receiver hitch for anyone that currently has an L and W radius rod plate steel/billet that wants to add a receiver hitch. 

    It can be used with our bumpers as well.  

    Only comes in black.

    Material Specs:

    1/4″ thick HRPO steel. 

    Receiver protrution for all variations is 5-15/16″

    All variations accepts standard 2″ receiver with 5/8″ pin

    Add to cart
  • Aluminum End Caps for Bumpers and Tree Kickers

    $10.00$35.00

    These are aluminum replacement end caps for L&W bumpers and tree kickers. 

    These are aluminum replacement end caps for L&W bumpers and tree kickers. 

    • MADE IN USA
    • Perfect for Tubing ends
    • Machined from 6061-T6 aluminum

    FITMENT:

    1.75 tubing diameter

    .120 wall thickness

    Select options
  • 2014-2018 Front Winch Bumper 1K/TURBO

    $450.00$500.00
    2014-2018 Front Winch Bumper 1K/TURBO

    This bumper comes with all mounting winch plates and hardware needed to install.

    (DOES NOT INCLUDE FAIRLEAD)

    This bumper comes (WITH BROWS) AS PICTURED ABOVE ONLY. MEANING IT LOOPS AROUND THE HEADLIGHTS.

    Setup to Mount Standard 3,500 lb to 6,000 lb winch’s. (Black Ops preferred, but will take other winches brands as well)

    Wide Spool Winches DO Fit In This Bumper

    These bumpers use a 6 inch fairlead. 

    Select options
  • TURBO S- Race Style Rear Bumper

    $325.00$375.00

    This listing is for Turbo S models only.

    This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. 

    Made from 1.75 x .120 Wall Steel

     CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

     

     

    Select options
  • TURBO S- Receiver Hitch Plate for L&W Bumper

    $90.00

    This is a replacement for the steel or billet radius plates that are used in correspondence with a Turbo S L&W Bumper.

    They come in black only.

    PLEASE NOTE WITH USING THIS PLATE YOU MAY HAVE TO REMOVE AND OR MOTIFY THE PLACEMENT OF THE D HOOK ON THE BOTTOM ON YOUR MACHINE FOR THE PLATE TO SIT FLUSH WITH THE MOUNTING POINTS TO BOLT UP PROPERLY. 

    Material Specs:

    1/4″ thick HRPO steel. 

    Receiver protrusion for all variations is 5-15/16″

    All variations accepts standard 2″ receiver with 5/8″ pin

    Add to cart
  • Winch Plate replacement kit for L&W Winch Bumper

    $50.00

    This is the replacement plates and hardware for a L&W Winch Bumper

     

    This will not work with non- L&W Bumpers

    Select options