0$0.00

No products in the cart.

Category

Category

Heim Replacements

$15.00

This Listing is for 5/8 & 3/4 Heims.

These are replacement Heims only, they do not carry any warranty as they are considered a wear part.

We recommend keeping them greased with a non water based lubricant for a longer lasting use. 

WE OFFER BOTH LEFT AND RIGHT HAND THREADS.

PLEASE READ FITMENT BELOW IF NEEDING TO KNOW WHICH THREAD TO PURCHASE FOR L&W PRODUCTS.

Product price
Additional options total:
Order total:

FITMENT: (THIS FITMENT INFO IS FOR LANDW PRODUCTS ONLY)

All factory style tie rods take a LEFT hand heim.

All Clevis style tie rods take both a right and left hand heim. Please make sure to check which thread you have on which side.

All 1 Heim Radius rods take a Right hand heim.

All 2 Heim Radius rods take both a right and left hand heim. Please make sure to check which thread you have on which side.

 

Pro R/ Turbo R will take the 3/4 heim joints

 

Fit

Left, Right
Size

3/4, 5/8
SKU: 2739 Categories: , , ,

Related products

  • 1K/Turbo Rear Bumper (2019-Current)

    $350.00 – $400.00

    This listing is for 1K/TURBO models only.

    This bumper comes with a rear radius plate (steel-powdered black) and all hardware needed to install. 

    Made from 1.75 x .120 Wall Steel

    CHECK OUT our Additional Bumper Add Ons and Upgrades Below!

    Select options
  • Ball and Socket Tie Rods

    1K/Turbo Tie Rods – Factory Style

    $189.00 – $290.00

    These Tie Rods Fit Polaris RZR 1000 and Turbo

    Specs on the Rods:

    These are factory style ball and socket tie rods. 

    This listing is for a SET

    6061 Aluminum. 

    Made in America

    Lifetime Warranty on rod itself.

    Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end) 

    To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. **2016 Turbo will always be M14**

     

    Factory ends are not warrantied, only the tie rod itself. 

     

    Specs for HD Rebuild-able Tie Rod Ends:

    Fully rebuildable

    Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

    100 percent made in USA

    This product holds an 18 month warranty

    Options:

    1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)

    2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)

    https://landwfab.com/product-category/rzr-parts/tie-rods/

    https://www.facebook.com/landwfab/

     

    Select options

  • PRP 4.2 Harness

    $110.99

    L & W now carries PRP 4.2 UTV harnesses. This sleek 4 point harness will provide superior safety for your UTV, all while remaining comfortable for hours and miles of riding! The EZ adjuster feature allows for a quick and easy adjustment in even the muddiest conditions. This harness is available in a variety of colors: Red, Blue, Black, Silver, and Orange! Make an uncomfortable UTV harness a thing of the past in your riding experience.

    Select options

  • Polaris RZR RS1 Heavy Duty Axles – Rhino 2.0

    $239.95

    Fitment

    • Polaris RZR RS1 : 2018+

    NOTE: Not compatible with Anti-Lock Brake Systems (ABS)

    Features

    • 100% stronger than stock
    • Utilizes the Rhino 2.0 Formula
      • Size: A massive 4mm increase in size!
      • Materials
      • Heat Treatment
    • Constructed of 4340 chromoly steel and finished with a proprietary heat treatment
    • Industry leading 18-month warranty
    • Field and lab tested for extreme strength and endurance
    • CAD drawn for expert precision
    Select options