Category: Newest Products

Newest Products

Showing all 17 results

  • Cooler Mount for 1k/ Turbo

    $100.00

    Cooler Mounts:

    Fits a 1K/Turbo (For Turbo S, please see Turbo S Listing)

    1. Works with All RZR XP including highlifter edition
    2. Uses eye bolt Grip mount
    3. All hardware included
    4. Made from 3/16 HRPO
    5. Fully adjustable to fit over 30 different cooler models including these top models:
       i) YETI Tundra 35
      ii) RTIC 20
      iii) YETI 20
      iv) Ozark 26
      v) NICE 26

    IS NOT COMPATIBLE WITH POLARIS OR PELICAN COOLERS.
    6. Comes powder coated black

     

    [video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/RZR-XP-TURBO-COOLER-MOUNT.mp4"][/video]
    Add to cart
  • Cooler Mount for Turbo S

    $100.00

    Cooler Mounts:

    This listing is for TURBO S ONLY

     

    Cooler Mount (Factory Cage) Specs:

    1. Works with All Turbo S with factory cage
    2. Made from 3/16 HRPO
    3. Comes with all hardware needed
    4. Fully adjustable to fit over 30 different cooler models including these top models:
      i) YETI Tundra 35
      ii) RTIC 20
      iii) YETI 20
      iv) Ozark 26
      v) NICE 26

    NOT COMPATIBLE WITH PELICAN OR POLARIS COOLERS
    5. Comes powder coated black

    [video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/TURBO-S-COOLER-MOUNT-FACTORY-CAGE.mp4"][/video]

    Cooler Mount (Aftermarket Cage) Specs:

    1. Works with most Turbo S with aftermarket cage that doesn’t utilize rear support bars.
    2. Made from 3/16 HRPO
    3. Comes with all hardware
    4. Fully adjustable to fit over 30 different cooler models including these top models:
      i) YETI Tundra 35
      ii) RTIC 20
      iii) YETI 20
      iv) Ozark 26
      v) NICE 26

    NOT COMPATIBLE WITH PELICAN OR POLARIS COOLERS
    5. Comes powder coated black

    [video width="1920" height="828" mp4="https://landwfab.com/wp-content/uploads/2020/10/TURBO-S-COOLER-MOUNT-AFTERMARKET-CAGE.mp4"][/video]
    Select options
  • Aftermarket Snap In Grill

    $160.00

    Options for outline color and l&w logo

    Main part of the grill will always be black

     

    Fitment:

    Turbo S

    19-current models 1000/ turbo

    Select options
  • RS1 Diff Plate

    $225.00

    Made of 11ga steel

    Powder Coated Black

    All hardware included

    No wiring included.  Wiring can be done by by splicing into the factory harness.

    Instructions for cutting and Diff installation not included at this time, but can be found on Internet.

    This version doesn’t allow use of winch mounting over the differential.

     

    DOES NOT COME RED. Red is for Photo purposes ONLY.

    Add to cart
  • PRO XP- 1 Heim Adjustable Radius Rods

    $190.00$390.00

    THIS LISTING IS FOR PRO XP MODELS ONLY.

    The Upper Radius Rods have 1 adjustable Heim for adjustability if needed. 

    The Lower Radius Rods will be direct bolt on.

    Includes all spacers needed for install. 

    PLEASE NOTE THAT IF YOU HAVE GEN3 SUPERATV PORTALS YOU WILL NEED TO PURCHASE THE ADJUSABLE RADIUS RODS (1 HEIM OR 2 HEIM) in order for your suspension to have enough room to travel without busting the portal bracket ear. 

    They are 6061 Aluminum, and made in the USA. 

    These Radius Rods hold a Lifetime Warranty. 

    Select options
  • Aftermarket Snap In Grill with Light Bar

    $185.00

    Comes with Light Bar (does not include wiring harness)

    Options for outline color and l&w logo

    Main part of the grill will always be black

     

    Fitment:

    Turbo S

    19-current models 1000/ turbo

    Select options
  • Turbo S- Forward A Arms with Adjustable Uppers

    $825.00$925.00

    NEW PRODUCT PHOTO COMING SOON!

    This set of A Arms has adjustable uppers.

    The adjustment is in the uppers only, the lowers are direct bolt.

    The A Arms are 1.75″ Forward. The adjustable pins have a 1 inch diameter.

    You can reuse your stock bushings and stock ball joints.

    Select options
  • Light Bar Mounting Tabs

    $25.00

    These mounting tabs can be used to mount a 30-34 inch light bar or single pods.

    They are powder coated black.

    They do not come with hardware. You will use the hardware from your cage to mount them.

    The tabs mount to the bottom bung of your aftermarket or stock cage.

    Select options
  • 2021 Ranger Forward A Arms with Adjustable Uppers

    $600.00$650.00

    This set of Front A-Arms have adjustable uppers.

    The adjustment is in the uppers only, the lowers are direct bolt.

    These A-Arms are 1.75″ Forward. The adjustable pins have a 1 inch diameter.

    These are only offered raw or powder coated black. 

     

    Select options
  • 31″ Light Bar

    $39.99
    LED Color Temperature: 6000K-6500K
    Working Lifespan: over 30,000 hours
    Add to cart
  • Turbo S- Forward A Arms with Adjustable Uppers (MEGA BALL JOINT)

    $825.00$925.00

    NEW PRODUCT PHOTO COMING SOON!

    This set of A Arms has adjustable uppers.

    The adjustment is in the uppers only, the lowers are direct bolt.

    The A Arms are 1.75″ Forward. The adjustable pins have a 1 inch diameter.

    You can reuse your stock bushings.

     

    THIS LISTING IS FOR MEGA BALL JOINTS ONLY. They are made specifically for Keller Mega balls joints and will not work with standard ball joints.

    Select options
  • Race Style A-Arms STANDARD – (TURBO S)

    $750.00$800.00

    BUILT TO ORDER

    These A-Arms are 1 1/2 – .120  wall with extra bracing on the arms.

    You can reuse your stock A-Arm bushings and Ball Joints. 

    This listing is for Turbo S models only.

     

    Select options
  • Race Style 1.75″ Forward A Arms (1K/ Turbo)

    $725.00$825.00

    These A-Arms are 1 1/4 – 3/16 wall with extra bracing on the arms.

     

    These A-Arms come tapped for grease fittings. (zerk fittings NOT included.)

     

    These A-Arms are High clearance. 

    Will NOT work with 6+1 or 5+2 Offset Wheels, UNLESS you are running either a steering stop or 1inch wheel spacers. 

     

    FITMENT

    This listing is for 1K/Turbo models only.

    These require 14-16 model bushings.

     

    • If you have a 17-CURRENT Model machine you can run these A-Arms HOWEVER, you will have to purchase the 14-16 Model A-Arm bushings for them to be compatible for installing. 

     

    • If you have a 14-16 Model machine you can reuse your stock A-Arm bushings with these Arms.
    Select options
  • Race Style A-Arms STANDARD – (TURBO S) (MEGA BALL JOINT)

    $750.00$800.00

    BUILT TO ORDER

    These A-Arms are 1 1/2 – .120  wall with extra bracing on the arms.

    This is for the MEGA Ball Joint. These will only work in conjunction with Keller Mega Ball Joints.

    This listing is for Turbo S models only.

     

    Select options
  • Race Style A-Arms 1.75 FORWARD w/adjustable uppers)-TURBO S

    $750.00$800.00

    Race Style A-Arms (1.75 FORWARD w/adjustable uppers))- (Turbo S)

    This is for the STANDARD BALL JOINT. 

    BUILT TO ORDER

    These A Arms are 1 1/2 – .120 wall with extra bracing on the arms.

    You can reuse your stock A-Arm bushings and Ball Joints.

    This listing is for Turbo S models only.

    Select options
  • Race Style STANDARD A-Arms (1K/Turbo)

    $725.00$825.00

    These A-Arms are 1 1/4 – 3/16 wall with extra bracing on the arms.

    These A-Arms come tapped for grease fittings. (zerk fittings NOT included.)

    These A-Arms are High clearance. 

     

    FITMENT

    This listing is for 1K/Turbo models only.

    These require 14-16 model bushings.

     

    • If you have a 17-CURRENT Model machine you can run these A-Arms HOWEVER, you will have to purchase the 14-16 Model A-Arm bushings for them to be compatible for installing. 

     

    • If you have a 14-16 Model machine you can reuse your stock A-Arm bushings with these Arms.

     

     

    Select options
  • Packout Mount replacement hardware

    $25.00

    This is the replacement hardware kit for our Packout mounts.

    • DOES NOT INCLUDE MOUNT
    Add to cart